Skip to main content
Contributor I
Feb 14, 2020 11:32 PM UTC

Do Not Buy Another Sonos

I just got off the phone with tech support - my Sonos cube cant “connect”with the app on my phone.I haven't used the device in a month. After going through the usual antiquated prompts I was told that unless I plug in an ethernet cable from the modem/router to the Sonos cube It cannot be fixed - WHO HAS AN ETHERNET CABLE LYING AROUND in 2020? All I can say is that its Valentines Day and I have no music. Pathetic. I’m shorting SONO stock on Monday. 

    This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

    49 replies

    ratty
    Feb 15, 2020 1:32 PM UTC

    The idea that I have to find an ethernet cable ... then unplug the Play 1, take it to the Router/Modem, plug in the enet cable in order to get it working everytime I want to use it is RIDICULOUS. 

    It most certainly is. And unless you’re in possession of a faulty unit you apparently have local network problems, quite possibly related to wireless range and/or interference.  

    In the course of the dialogue with Sonos Support they should have requested a system diagnostic. What did that reveal?

    Translate
    Smilja
    Feb 15, 2020 2:01 PM UTC

    I did the setup when I first used the units. No wifi changes at any of the locations. I understand the ethernet lead is temporary but too clumsy a fix. Its too unreliable  - Imagine if I was having a party ,how sure/comfortable should I be that we will have any music using Sonos. 

     

    If you’d like to run Sonos in SonosNet mode you need to wire the Playbar permanently to the router (don’t use speakers that are set up as surrounds for that purpose).

    Subsequently remove the WiFi credentials from the system: On iOS or Android: From the Settings tab, tap System > Network > Networks. Select the WiFi network you'd like to remove, and tap Remove. Subsequently wait about 10 min, then go to Settings → System → About my Sonos system and see if WM:0 is being displayed next to each unit - in this case you’re set. 

    Finally set SonosNet channel to 1 and the router’s WiFi to 6, and see how this works out. Sonos app → System → Network → SonosNet channel

     

    Do you have any wireless range extenders or powerline in use? Unplug those first; once the system is running in SonosNet mode, you can plug them back in.

    Translate
    »And the world is like an apple whirling silently in space, Like the circles that you find in the windmills of your mind.« (›Windmills Of Your Mind‹ [1967]. Music by Michel Legrand ; English lyrics written by Alan & Marilyn Bergman)
    bbc8Author
    Contributor I
    Feb 15, 2020 2:52 PM UTC

    If you can’t/won’t take the advice of users here bbc8, then there is not much anyone else can do. Here is what I would personally suggest…

    • Just get the cable and try running your system on SonosNet, with just one Sonos device (Play:1) wired to the main router. 
    • Set your SonosNet channel so that it is at least 5 channels away from your routers 2.4ghz channel to prevent overlap. Always fix the channels, rather than allowing the router to auto-select them on startup and avoid channels in use by your neighbours..
    • Ensure your WiFi credentials are NOT stored in the Sonos App “Settings/System/Network/Wireless Setup” (They are not required when running a system on SonosNet).
    • Add all your Sonos IP addresses to your routers DHCP Reservation Table. This is optional, but highly recommended.
    • Make sure that your Sonos devices are at least 3 feet away from any other wireless devices, including the main router.
    • Where practicable, connect any other non-Sonos devices to the 5ghz Wifi band. 
    • Switch off any guest WiFi radios when they are not in use/required.
    • If using WiFi access points, or repeaters, with the same SSID as the main router, then ensure they operate on the same 'fixed' WiFi channels as the main router.

    This Sonos Support document is also worth keeping in mind... 

    Hope those few ‘easy to follow suggestions' assist and prove to be useful. If it works for you, then perhaps buy a Boost and put it in the place of the wired Play:1 if you find you are not able to leave the one device wired.

    The alternative to these suggestions, is to leave all devices on your routers WiFi and simply try different 'fixed’ non-overlapping 2.4ghz WiFi channels, whilst also heeding the advice in the linked support document above, but personally speaking, I think you will be far better off switching to SonosNet and use its mesh connectivity method.


    Thank you for your thorough and thoughtful (trying to) help. Pretty daunting process though - Not sure its quite worth it - will it be a onetime fix? Or all the time. The latter I assume. Time for a new system from another maker.

     

    Translate
    Feb 15, 2020 2:59 PM UTC

    By all means buy another system. But your network problems will cause the same issues with the replacement.  And to anticipate your next comment, ‘there is nothing wrong with my network’, I have heard that 100 times and on 99 it turned out to be the network. 

    The easiest thing for you to do is to run a system diagnostic when you experience problems, and post the confirmation number back here, or go onto the Sonos social media support armed with that number.  It should give clues as to what is happening.  

    Translate
    ratty
    Feb 15, 2020 3:01 PM UTC

    Time for a new system from another maker.

    I’m not convinced that Sonos Support have been given a chance to help resolve the local network gremlins. A replacement wireless multi-room audio system (such as?) could well suffer from similar issues. 

    Translate
    bbc8Author
    Contributor I
    Feb 15, 2020 3:19 PM UTC

    Thanks to all for your heartfelt responses - The suggested fixes are so clumsy(multitude of steps) to get one Play 1 working on a regular household network that my feelings about the SONOS product have been perfectly re-inforced. Bad product, unreliable. Time to move on. Pity

    Translate
    Feb 15, 2020 3:21 PM UTC

    Bye and good luck. I shall continue to enjoy my perfectly functioning 7 zone Sonos system. 

    Translate
    bbc8Author
    Contributor I
    Feb 15, 2020 3:24 PM UTC

    By all means buy another system. But your network problems will cause the same issues with the replacement.  And to anticipate your next comment, ‘there is nothing wrong with my network’, I have heard that 100 times and on 99 it turned out to be the network. 

    The easiest thing for you to do is to run a system diagnostic when you experience problems, and post the confirmation number back here, or go onto the Sonos social media support armed with that number.  It should give clues as to what is happening.  


    Im not sure what you mean by Network issues. Small house with best cable wifi - No other devices constantly using/connected to wifi. Simple. Plug in the Play1, connect to wifi, WORK as supposed. That's all. Ive tried the system diagnostic route. Pathetic.

    Translate
    ratty
    Feb 15, 2020 3:24 PM UTC

    Bad product, unreliable. 

    No it isn’t. Your network is. 

    Get the device online. Then submit a system diagnostic and post the confirmation number for Sonos Support to look into the issues. 

    Translate
    bbc8Author
    Contributor I
    Feb 15, 2020 3:25 PM UTC

    Bye and good luck. I shall continue to enjoy my perfectly functioning 7 zone Sonos system. 


    Same to you

     

    Translate