Skip to main content
Answered

Surrounds and Sub Mini stopped working after 14.18


  • Contributor I
  • 5 replies

My One SL surrounds and Sub Mini no longer work after 14.18. I've had Arc and surrounds for almost a year without issue, and got the Sub Mini last week. Trueplay gives me a "lost speaker" error as well. The One SLs work individually and also in a stereo pair. Things I've tried…

- Hard wiring Ethernet 

- Router reboots (Nest Wifi)

- Assigned IPs for all Sonos products

- Speaker reboots 

- Factory resets of everything, router included

- Unpairing, repairing

- Called Sonos support on 2 occasions 

One strange thing is that when playing music while surrounds are paired, the surrounds don't work but then suddenly work for half a second, then goes quiet again. Happens about once every 10 minutes. There's also a solo Beam in another room but I doubt that's causing any issues. 

I have no idea what to try any more. Open to any ideas or suggestions. Thank you!

Most recent diagnostic: 1240428764 (Only SLs connected for now to troubleshoot)

 

Moderator Note: Removed (but took note of) case number as it’s information used for identification.

 

Best answer by Airgetlam

I’m not honestly sure what ‘tried everything possible’ really means. Obviously, you haven’t, otherwise you wouldn’t be posting asking for assistance. 

The surround speakers connect to your PLAYBAR on a 5 GHz channel created by the PLAYBAR. The speaker still gets an IP address from your router, however.

If one of the PLAY:1s is not playing, and the other is, that might suggest an issue with the PLAY;1, so most likely it has some sort of wifi interference , or I would recommend that you submit a system diagnostic within 10 minutes of experiencing this problem, and call Sonos Support to discuss it.

There may be information included in the diagnostic that will help Sonos pinpoint the issue and help you find a solution.

When you speak directly to the phone folks, they have tools at their disposal that will allow them to give you advice specific to your Sonos system and network.

View original
Did you find what you were looking for?
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

10 replies

Corry P
Forum|alt.badge.img+18
  • Sonos Staff
  • 8516 replies
  • October 24, 2022

Hi @pslw 

Welcome to the Sonos Community!

There is a high count of failed transmissions between the Arc and it’s satellites. Due to the strength of the signal coming from your WiFi, I think it likely that you have your router far too close to the Arc - please separate them by at least 1m.

I hope this helps.


  • Author
  • Contributor I
  • 5 replies
  • October 25, 2022

Unfortunately I don't think that's the issue for 2 reasons.

- Router and Arc has been in same place since I bought the Arc without issue 

- When replaced with Sonos Beam in same exact location, the surrounds and sub play without issue 

Any other ideas? Thank you! 

 

 

 


Corry P
Forum|alt.badge.img+18
  • Sonos Staff
  • 8516 replies
  • October 25, 2022

Hi @pslw 

I’m just going by empirical evidence. In all likelihood, your Arc was experiencing these issues before, but it wasn’t bad enough to manifest as a problem. Now, for whatever reason (probably the additional load of communicating with the Mini Sub too) has increased the error count to the point where problems arise. The Beam is a smaller, differently shaped device with different hardware - this might have been enough to mitigate the issue.

I notice that you didn’t deny that the router was close to the Arc - if it is, that is definitely the problem.

pslw wrote:

Any other ideas? Thank you! 

Nope, and you are very welcome!

 


  • Lyricist II
  • 4 replies
  • October 26, 2022

I have the same problem after the update. One of the play1 does not connect , the other one and sub connects to the playbar. Tried everything possible. Looks like only a further software update can fix this. I switched off everything then put on the router first then the playbar, then the problematic play1 then the 2nd play1 and finally the sub after which it connected all but no sound came through the problematic play 1 . The play 1 works individually or as a stereo pair. Spent a lot of time trying to fox this but no chance 


Airgetlam
  • 42511 replies
  • Answer
  • October 26, 2022

I’m not honestly sure what ‘tried everything possible’ really means. Obviously, you haven’t, otherwise you wouldn’t be posting asking for assistance. 

The surround speakers connect to your PLAYBAR on a 5 GHz channel created by the PLAYBAR. The speaker still gets an IP address from your router, however.

If one of the PLAY:1s is not playing, and the other is, that might suggest an issue with the PLAY;1, so most likely it has some sort of wifi interference , or I would recommend that you submit a system diagnostic within 10 minutes of experiencing this problem, and call Sonos Support to discuss it.

There may be information included in the diagnostic that will help Sonos pinpoint the issue and help you find a solution.

When you speak directly to the phone folks, they have tools at their disposal that will allow them to give you advice specific to your Sonos system and network.


Ken_Griffiths

@Sunil mathew,

Sometimes a power off of all speakers and TV for a few minutes can sometimes help. Also put the routers 2.4Ghz band to use a non-overlapping WiFi channel (channel 1, 6 or 11) and if the router allows set the channel-width to 20Mhz only. That helps to reduce interference.

If the master HT product is wired to the LAN then ensure you have not disabled its wireless adapter, that’s required to communicate with the surrounds/Sub (5Ghz band). Check any other devices near the TV are not interfering with the signals too (Bluetooth/Zigbee devices nearby) and do not wire the surrounds/Sub to the LAN, particularly if the master HT device is not wired to the LAN.


  • Author
  • Contributor I
  • 5 replies
  • November 16, 2022

Following up on this issue as issue persists with 14.19.


Chris
Forum|alt.badge.img+22
  • Lead Maestro
  • 17598 replies
  • November 16, 2022

You seemed to ignore the issue the sonos rep said they were seeing 


  • Author
  • Contributor I
  • 5 replies
  • November 16, 2022

Because he is empirically wrong. By that logic I should be able to unplug the new Sub Mini and everything would work again as it did for 6 months, but it didn't.

 

Since then, I've obtained a new router, hardwired the Arc, and other Sonos devices to no avail. 


Chris
Forum|alt.badge.img+22
  • Lead Maestro
  • 17598 replies
  • November 16, 2022

So you don’t want to try suggestions probably yea you’re not going to get strong support.  You have to follow a process 


Cookie policy

We use cookies to enhance and personalize your experience. If you accept you agree to our full cookie policy. Learn more about our cookies.

 
Cookie settings