Skip to main content
Contributor I
Oct 8, 2019 10:19 AM UTC
Answered

Sonos Move not showing

I’m having an issue where my new Sonos Move will connect to the network and will not show in the app. The bit that says offline disappears but so does the speaker. Restarting only fixes this issue some of the time. Any ideas?
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Ken_Griffiths
Oct 8, 2019 10:47 AM UTC
Perhaps try resetting the Move and switching WiFi band... I would put it on the further-reaching 2.4ghz band, particularly if you connected it to the 5ghz band during the previous setup.

Here is the reset procedure...
  1. Take Move off the charging base.
  2. Press and hold the power button for at least 5 seconds to power it off.
  3. Wait for 30 seconds
  4. Press and hold the Join button and place Move back on the charging base.
  5. Continue holding the Join button until the light on top flashes orange and white. Let go the button.
  6. The light will flash green when the process is complete and your Sonos Move is ready to be set up.
  7. If you did have Alexa/GA installed, then don’t forget to reinstall the voice assistant again via Settings/Services/Voice in the Sonos App

76 replies

Lyricist II
Dec 23, 2021 11:11 PM UTC

…or do absolutely nothing and watch as your Sonos Moves may mysteriously re-appear in your app and accept music, for no apparent reason, after an hour or so.

i swear, my Sonos devices make me curse like a sailor, at least twice a week!

Translate
Ken_Griffiths
Dec 23, 2021 11:19 PM UTC

…or do absolutely nothing and watch as your Sonos Moves may mysteriously re-appear in your app and accept music, for no apparent reason, after an hour or so.

i swear, my Sonos devices make me curse like a sailor, at least twice a week!

If it happens again, try this…

  • Switch off the WiFi network connection on the mobile controller device. 
  • Fully close the Sonos App (slide off screen)
  • Reconnect the mobile to the WiFi network 
  • Open Sonos App and see if the ‘Move’ returns.

If using an iOS controller device, turn off ‘Private Address’ (MAC spoofing) and/or ‘Limit IP address Tracking’ in the WiFi connection properties to see if that might ‘possibly’ improve the Sonos App discovery of the ‘Move’.

Translate
Lyricist I
Feb 22, 2022 7:14 PM UTC

I am experiencing the same Move issues as many of you, and on iOS alone.  The setup consists of the following:

  • 2 Playbars
  • 2 Beams
  • 1 Sub
  • 1 Play:3
  • 2 Play:1s
  • 2 Moves
  • 3 Connect:Amps
  • 1 Connect

These are distributed across nine rooms.  The macOS controller works flawlessly and detects every room and speaker with complete reliability.  The iOS app, however (in all versions for as long as the Move has been out), regularly but intermittently loses the ability to detect the Move.  Despite this, the iOS app does seem to have awareness that the Move devices exist since the app will immediately post the devices as “Offline” if powered down, and will recognize them as online when they are moved from the charging base.

This seems to me to be among the most clear-cut cases of an app-specific bug related to sufficient polling of the device state.  Unfortunately, Sonos tech supports wants to discuss the network topology even when the iOS controller, macOS controller, and the Moves are sitting side-by-side on the same wireless access point, and only the iOS controller exhibits the issue.  I am considering disabling MAC spoofing as one user suggested and assigning static IP address to both Moves to see if the situation improves, but this should not be necessary.

In the end, I want it to “just work” and enjoy the system.  When guests ask me what my experience has been with Sonos, my opinion is tainted despite the investment that has been made.  It is unfortunate to have to hold on to hope that someone that can make a difference will read this and do something to address our concerns.

Translate
Lyricist I
Jun 10, 2022 8:15 AM UTC

Just made an account to contribute to this discussion. Because I have been working with the Move for a while now (1+ year) and it starts to annoy me:

Two set-ups, both connected through Wi-Fi:

Beam + 2 One SL’s in one room. Zero problems. Always available.

But then, the Sonos Move. Both on the docking, and off the docking (with the docking closer to the router than the setup in the other room), it regularly disappears from the app. When it's off the docking I could understand, but usually it's ON the docking. Occasionally I can reconnect it by going to the Spotify App on the phone and then selecting ‘connect a device’, because somehow the Spotify app manages to find it when the Sonos app doesn't. But this trick doesn't always work (sometimes the Spotify app can't find it either).

So then I take it off the docking, turn it off, wait, turn it back on. Often this works (although sometimes I still have to go through the Spotify app afterwards). More than a couple times even this didn't help. When it doesn't, I give up and just use Bluetooth to connect it (but then I have to keep my phone near enough for it to stay connected, and keep my phones Wi-Fi turned on).

This issue exists with both my Android phone, my gf's I-Phone (and her old I-Phone), and the Desktop app on my laptop. Often voice activation also doesn't work when this happens, sometimes it does. When it doesn't Google assistant claims there's a network issue, but that ‘issue’ never affects any of the other devices in the house (Sonos or other).

Thanks to the Bluetooth function I’ll always be able to listen to music in the end, but it is somewhat annoying that I have to spend 5 minutes trying to make it work, while the whole Sonos thing is advertised as a super duper easy experience. None of the suggested ‘fixes’ above works as a long term solution. It keeps on disappearing.

Translate
Ken_Griffiths
Jun 10, 2022 12:22 PM UTC

@MT8599 & @Simonster - did you try switching off ‘Private Address’ MAC Spoofing feature in the iOS WiFi connection properties - that’s just for the iPhone/iPad controller only of course.

Also note that the Sonos App uses SSDP to initially discover the players, multicasting via UDP to 239.255.255.250:1900 and, for good measure, broadcasting to 255.255.255.255:1900. So it appears something is going wrong with that discovery - it might be you have some wireless interference in and around the router, or players.

Perhaps try this - ensure the router firmware is fully up-to-date. 

Set the router to use the least-used fixed ‘non-overlapping’ WiFi channel 1, 6 or 11 and if the router allows, set a channel-width of 20Mhz only.

If using a mesh router WiFi system, set one Sonos device wired to the primary router/hub and have a read through this thread too:

Sonos on WiFi Mesh

If using SonosNet, then the wired device should be located away from the router to reduce interference - at least one metre away and then also set the SonosNet channel in the Sonos App so it is at least 5 channels away from your chosen router channel.

It’s also helpful to reserve (set static) all the Sonos products IP addresses in the routers DHCP Reservation Table.

See if doing those few things helps with your Move’s device discovery.

Translate
Enthusiast II
Jun 20, 2022 5:10 PM UTC

.

Translate