Skip to main content
Contributor I
Oct 8, 2019 10:19 AM UTC
Answered

Sonos Move not showing

I’m having an issue where my new Sonos Move will connect to the network and will not show in the app. The bit that says offline disappears but so does the speaker. Restarting only fixes this issue some of the time. Any ideas?
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Ken_Griffiths
Oct 8, 2019 10:47 AM UTC
Perhaps try resetting the Move and switching WiFi band... I would put it on the further-reaching 2.4ghz band, particularly if you connected it to the 5ghz band during the previous setup.

Here is the reset procedure...
  1. Take Move off the charging base.
  2. Press and hold the power button for at least 5 seconds to power it off.
  3. Wait for 30 seconds
  4. Press and hold the Join button and place Move back on the charging base.
  5. Continue holding the Join button until the light on top flashes orange and white. Let go the button.
  6. The light will flash green when the process is complete and your Sonos Move is ready to be set up.
  7. If you did have Alexa/GA installed, then don’t forget to reinstall the voice assistant again via Settings/Services/Voice in the Sonos App

76 replies

Ken_Griffiths
Oct 8, 2019 10:47 AM UTC
Perhaps try resetting the Move and switching WiFi band... I would put it on the further-reaching 2.4ghz band, particularly if you connected it to the 5ghz band during the previous setup.

Here is the reset procedure...
  1. Take Move off the charging base.
  2. Press and hold the power button for at least 5 seconds to power it off.
  3. Wait for 30 seconds
  4. Press and hold the Join button and place Move back on the charging base.
  5. Continue holding the Join button until the light on top flashes orange and white. Let go the button.
  6. The light will flash green when the process is complete and your Sonos Move is ready to be set up.
  7. If you did have Alexa/GA installed, then don’t forget to reinstall the voice assistant again via Settings/Services/Voice in the Sonos App
Translate
J05H912Author
Contributor I
Oct 8, 2019 1:54 PM UTC
I have already tried resetting the speaker but it only fixed it for a while. However I know that the speaker is still connected to the internet because if I have google or Alexa turned on I can play music using that
Translate
J05H912Author
Contributor I
Oct 8, 2019 2:08 PM UTC
This is before I turn the speaker on:



This is after I turn the speaker on and it connects to the internet:



As you can see in the screenshots, I have full signal on the wifi
Translate
Senior Virtuoso
Oct 8, 2019 2:11 PM UTC
Have you tried
Settings, System, Find Missing Product
to see if it shows up?
Translate
melvimbe
Oct 8, 2019 2:12 PM UTC
Do you have wireless extenders or access points on your network?
Translate
Danny
Ryan S
Retired Sonos Staff
Oct 8, 2019 4:47 PM UTC
Before we go too far down the rabbit hole here, the Move is designed to go into a standby mode when it's not in use for a while. In that mode, it'll drop off the app until you close and reopen the app, or quick press the power button on the unit. @Ken_Griffiths has quite the observations laid out here. Does this seem to match up with what you're seeing?

The "Offline" tag is saying that the unit has dropped for unexpected reasons, such as turning the power off.
Translate
Mark good posts by pressing the like button, and select the best answer on questions you've asked to help others find solutions.
J05H912Author
Contributor I
Oct 10, 2019 12:57 AM UTC
Have you tried
Settings, System, Find Missing Product
to see if it shows up?

Just tried this but it doesn't create the network that I need to join


Do you have wireless extenders or access points on your network?
Yes, I have a wireless repeater which uses a second SSID


Before we go too far down the rabbit hole here, the Move is designed to go into a standby mode when it's not in use for a while. In that mode, it'll drop off the app until you close and reopen the app, or quick press the power button on the unit. @Ken_Griffiths has quite the observations laid out here. Does this seem to match up with what you're seeing?

The "Offline" tag is saying that the unit has dropped for unexpected reasons, such as turning the power off.

I understand the offline part but after I tap the power button it does not reconnect with the app. I have the app on both Android and iOS but they both show the se thing. The offline device disappears completely and I can no longer see the Move. See previous screenshots
Translate
Senior Virtuoso
Oct 10, 2019 5:56 AM UTC
The wireless repeater may be the problem.

Are you sure the Move is connected to the same SSID as the other speakers?

Try setting it it up again with the repeater turned off to be sure it’s connecting on the network you want it.
Translate
Ken_Griffiths
Oct 10, 2019 8:49 AM UTC
J05H912,

In “Settings/System/Network/Networks” in the Sonos App the SSID of the Move's connected WiFi Network should be shown. If it’s on the repeater SSID and the controller is connected to the main router (or vice versa) then that is the issue and both need to be on the same network, preferably the main routers network.

Here are the instructions to switch Networks for the Move speaker assuming you may want to put it on the same network as your mobile...

https://support.sonos.com/s/article/3666
Translate
J05H912Author
Contributor I
Oct 13, 2019 7:18 PM UTC
So, since my last post I have reset the speaker but as I was doing so my iPod stopped while looking for it on the network. But when I opened the app on my phone (Android) it came up with the register speaker option. After doing this the speaker appeared in the rooms on my phone. I have restarted my iPod and the app but the speaker still does not appear. It does however appear in the app on my phone and the windows application. I tried looking at the same time on all three. I am starting to think that it may be an issue with the app and not just my WiFi. I have made sure they are on the same network as each other, as well as taking it to another location with only one network but it has the same problems. I have three Sonos speakers on my home network and 2 on the other network. All other speakers show correctly on both networks only the Move does not.
Translate