Skip to main content
Avid Contributor III
Nov 28, 2022 2:35 PM UTC
Answered

Roam - On-line, then off-line. Lather, rinse, repeat.

I honestly do not understand what is wrong with my Roam. I have a pair of Play 1 speakers and a Connect:Amp, and none of them have the problems that the Roam has. 

The Roam is constantly falling off of the network. It disappears for weeks at a time, then returns and says it is off-line. How does the system know it’s there if it’s offline? A power cycle on the Roam and a reboot of the router help briefly, but then the problem returns -- the Roam has roamed away somewhere. 

I get that 2.4 GHz signal interruption and constrained bandwidth may cause connectivity glitches, but neither the Play speakers nor the Connect Amp have a problem adjusting to this. I have moved the Roam to the same room as the router, and it doesn't help. Also, I have not changed any router settings. 

It is seriously frustrating and infuriating to be forced to diagnose this problem every time I want to use the Roam. Other Sonos products just work, and work well, which is one reason I opted for the Roam as my third Sonos purchase. 

The Roam has not delivered on its promise of service and I am tempted to send it back to Sonos for a refund. It’s too late for that of course but this experience has me seriously reconsidering the Sonos experience. 

Is there anything I can do to prevent this poor behavior? 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
edge306Answer
Trending Lyricist II
Nov 29, 2022 8:49 PM UTC

Hmmm…. set the Roam to a fixed IP address in the network mesh (and a new Beam also added last week), as I’d done already with the rest of the Sonos kit in the house.  Roam was rebooted and is showing as now linked with the new, fixed IP.  Since then (several hours ago), it’s remained online and connected, despite not being used to play anything.  MIght be worth trying, if you’re having the same problem…???… (Battery Saver & WiFi Power Save also both still turned off in the app, and the Roam is sitting on the charger base which is plugged in and switched on)

16 replies

Lead Maestro
Nov 28, 2022 2:44 PM UTC

The Roam is a portable speaker so it won’t behave quite the same as your other non-portable speakers in the Sonos app.

When the Roam is powered on, the Sonos app will detect and show it on your system like your other speakers. If the Roam is in idle mode or completely powered off, the Sonos app will show it is offline. It the Roam is powered off for a long period of time, it will disappear from the list of devices on the Sonos app until it is powered on again.

Do you keep the Roam powered on all of the time? Do you use the charging base? Do you ever completely power off the Roam by holding down the button on the back for about 5 seconds until you hear a descending chime? Do you have Battery Saver mode enabled in the Sonos app?

Translate
"Receive with simplicity everything that happens to you." - Rashi
Rex BlockAuthor
Avid Contributor III
Nov 28, 2022 2:51 PM UTC

The Roam is a portable speaker so it won’t behave quite the same as your other non-portable speakers in the Sonos app.

When the Roam is powered on, the Sonos app will detect and show it on your system like your other speakers. If the Roam is completely powered off, the Sonos app will show it is offline. It the Roam is powered off for a long period of time, it will disappear from the list of devices on the Sonos app until it is powered on again.

Do you keep the Roam powered on all of the time? Do you use the charging base? Do you ever completely power off the Roam by holding down the button on the back for about 5 seconds until you hear a descending chime? Do you have Battery Saver mode enabled in the Sonos app?

 

Thank you for your reply. Yes, those are germane questions to this issue. And yes, I do keep it plugged in (but not on a charger base). The charger is a standard USB power block; Sonos says it won’t charge as fast, but it still shows 100%. 

The power recycle does involve a five-second button hold-down waiting for the tones. 

As for battery saver mode, I will have to check that, but I suspect not. 

The Roam is shown as being off-line (or absent) but the the power light on the unit is on (and not orange or blue). I don’t use it as a Bluetooth box so I don’t think that’s affecting it either. 

I really like the sound and design of the Roam, and it’s a shame it’s so troublesome to use. 

Translate
Trending Lyricist II
Nov 29, 2022 1:36 PM UTC

I’m having exactly the same issues with my 10 day old Roam. Sat on the charging base, Battery Saver and WiFi Power Save both turned off (no difference off or on), and the damn thing keeps falling off the network if not playing anything for a while. Only way is to force a reboot.  Not good enough Sonos!!  Getting very frustrated already…

Translate
Airgetlam
Nov 29, 2022 4:37 PM UTC

I’m curious as to what Sonos Support said, when you submitted a diagnostic and called in with the diagnostic’s number?

Translate
Bruce
edge306Answer
Trending Lyricist II
Nov 29, 2022 8:49 PM UTC

Hmmm…. set the Roam to a fixed IP address in the network mesh (and a new Beam also added last week), as I’d done already with the rest of the Sonos kit in the house.  Roam was rebooted and is showing as now linked with the new, fixed IP.  Since then (several hours ago), it’s remained online and connected, despite not being used to play anything.  MIght be worth trying, if you’re having the same problem…???… (Battery Saver & WiFi Power Save also both still turned off in the app, and the Roam is sitting on the charger base which is plugged in and switched on)

Translate
Rex BlockAuthor
Avid Contributor III
Nov 29, 2022 11:00 PM UTC

set the Roam to a fixed IP address 

Interesting. Can this be done on a non-mesh network?

 

Translate
Trending Lyricist II
Nov 29, 2022 11:21 PM UTC

set the Roam to a fixed IP address 

Interesting. Can this be done on a non-mesh network?

 

Yep.  You can assign fixed IP’s to attached devices on any network.  You will likely have to reboot the network and device after doing so but then any time after that, your router should assign the same IP address to that device.  I’ve assigned fixed IP’s to all of my Sonos kit (and much else too!), makes for a more organised system...

Translate
Trending Lyricist II
Nov 29, 2022 11:23 PM UTC

By the way, my Roam is still online and available several more hours later without being used.  So far, so good…

 

Translate
Airgetlam
Nov 30, 2022 12:44 AM UTC

For what it’s worth, a “bad IP” address issue is due to a failure in the router. I have had that issue before with my NetGear, which normally is an OK router, but assigning reserved IP addresses has been a godsend for me for years now.

Translate
Bruce
Trending Lyricist II
Nov 30, 2022 11:31 AM UTC

Almost 24 hours in now, my Roam is still online and available in the app.  Looks like the reserved IP has resolved it for me anyway...

Translate