My Sonos Beam Gen 1 can’t connect with my Samsung TV from time to time. I had re-setup the Tv again then the next day, the connection is lost when I turn on the TV. I have Mi-Box (Android TV) to connect the same Samsung TV.
Answered
Sonos Beam Gen 1 - Doesn't Work with Samsung TV from time to time
Best answer by Corry P
Hi
Welcome to the Sonos Community!
If you still have this issue after following all the steps provided by
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
I had disabled the HDMI CEC in my MiBox since day 1. The problem is occurred since the Sonos move to S2 spec. Also, it is audio delay(silence) while the TV turn on for about 10+ seconds.
william
In the TV settings, set HDMI-eARC Mode to OFF and Digital Output Audio Format to Pass-Through.
Also try this:
Disconnect everything from the TV including the Beam. Unplug the TV and Beam from power for a couple of minutes. Plug everything back in but keep everything disconnected. Make sure Anynet+ is enabled in the TV settings. Run TV Setup in the Sonos app. When the app instructs you, connect the Beam to the TV using the Sonos-supplied HDMI cable. After the Beam has been successfully connected, connect the Mi Box to the TV.
+19Hi
Welcome to the Sonos Community!
If you still have this issue after following all the steps provided by
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.