Contributor I

Answered

Sonos Beam 2 paired with ERA 100s

12 replies
4743 views

I know this issue is addressed from various angles. I have the Beam 2 and it was a huge improvement over a Vizio soundbar. Clarity of dialog was the biggest issue watching TV, movies etc. I am talking exclusively TV, not music. I am considering adding 2 ERA 100 speakers to get to the next level. I assume this will create a Surround Sound environment and generally improve clarity and dialog/sound. I keep reading about a short lag between the sound bar, speakers and TV. Is this a big issue or are we splitting hairs? It’s $400 dollars or so and there is no reason for a false start if it’s not going to work right. It’s a big room, 15x15 and opens into a kitchen and front room. No doors.

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

AjTrek1Answer

I think @boeingflyer is confusing Bonding Era 100’s to Beam 2 to create surround; as opposed to Grouping them to the Beam 2.

Bonding Era 100’s to Beam 2 will create the surround effect; but there is no audio delay as they receive information directly from the Beam2
Grouping Era 100’s to Beam 2 does not create the surround effect and there will be an audio delay of 75ms to them with the Beam2 when watching movies. There will be no delay when listening to music.

Together Everyone Achieves More = T.E.A.M.

Ken_Griffiths

@boeingflyer

I have the same/similar setup in our Kitchen/Diner - a Beam gen2, Era 100s and more-recently have added a Sub Mini to it - All play in perfect lip-sync with the LG TV we use and no issues seen with centre channel dialogue - there’s always the option to enable Speech Enhancement I guess, but I found that TruePlay tuning the Home Theatre Setup to the room with an iOS device is what provided the best sound output from the setup.

Adding both the Era surrounds and later the Sub Mini each made a significant improvement to both TV and Music audio. So I recommend adding the extra speakers. Obviously it’s a matter for you, but certainly no regrets here.

AjTrek1Answer

I think @boeingflyer is confusing Bonding Era 100’s to Beam 2 to create surround; as opposed to Grouping them to the Beam 2.

Bonding Era 100’s to Beam 2 will create the surround effect; but there is no audio delay as they receive information directly from the Beam2
Grouping Era 100’s to Beam 2 does not create the surround effect and there will be an audio delay of 75ms to them with the Beam2 when watching movies. There will be no delay when listening to music.

Together Everyone Achieves More = T.E.A.M.

Ken_Griffiths

@boeingflyer,

Here’s a quick link aswell, explaining how to ‘bond’ (not group) speakers, like 2 x Era 100s to your Beam gen2…

https://support.sonos.com/en-us/article/add-surround-speakers-to-a-sonos-home-theater

B

boeingflyerAuthor

Contributor I

Perfect! Thank you both.

G

G398

Contributor I

This is interesting and I'll certainly try it. I had issues with a delay between my Beam and Eras. I spent 4 hrs on the chat with Sonos and they couldn't resolve it. I sent a complaint to the CEO then received a response two weeks later from the factory supervisor confirming that connection from the TV to these devices isn't possible. I was not given any advice that it was achievable via bonding. Thank you for this and I will be trying it asap. On to the next problem.......

106rallye

Well, technically the answer was OK. There is an unavoidable delay if you group speakers. If your goal however was to set up a surround sound environment (never a delay) someone should have picked up on that.

G

G398

Contributor I

It isn't surround sound exactly, as the speakers are in different rooms around the house, but hopefully bonding will still work 🤞

Airgetlam

Bonding them as surround speakers will only supply them the surround channels from the 5.1 mix. If you have them in separate rooms, you’d want to group them, so they receive all channels at once, but they will be subject to the 75Ms delay from the Beam.

Bruce

G

G398

Contributor I

Apologies, can you tell what is meant by the 5.1 mix please?

Airgetlam

Anything greater than stereo. Most movies, many TV shows, some music. Dolby Digital is 5.1. Other formats can be higher than 5.1.

Bruce

Show more replies

Sign up

Login to the community