beam

2 replies
529 views

Hi

im building a media wall and wanted to build a recess/ niche to put Sonos beam into , leaving approx 50mm gap all around it

will this work ok?

Sonos Beam

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

G

GuitarSuperstarAnswer

Lead Maestro

It should be ok. Sonos recommends 50 mm minimum clearance on both sides and 25 mm minimum clearance on the top (if you want to access the touch controls). But it wouldn’t hurt to add a little more space on the sides to give the two side-firing drivers a little more space to work. You also want to make sure the Beam isn’t too deep into the recessed wall. Try to keep the front of the Beam flush with the outer wall.

"Receive with simplicity everything that happens to you." - Rashi

G

GuitarSuperstarAnswer

Lead Maestro

It should be ok. Sonos recommends 50 mm minimum clearance on both sides and 25 mm minimum clearance on the top (if you want to access the touch controls). But it wouldn’t hurt to add a little more space on the sides to give the two side-firing drivers a little more space to work. You also want to make sure the Beam isn’t too deep into the recessed wall. Try to keep the front of the Beam flush with the outer wall.

"Receive with simplicity everything that happens to you." - Rashi

S

Steve lewis72Author

Contributor I

Thanks very much for that,

I’ll do as you advise,

Sign up

Login to the community