Skip to main content
Headliner I
Nov 19, 2026 1:50 PM UTC
Question

Arc Ultra HDMI .... Need a longer cable solution ... approximately 8.5 meters. Ideas?

Best laid plans!

Have a new Arc Ultra / ERA 300 Rears & 2 x Sub 4 system installed and talking to an LG W6 Wallpaper.

The current cable is a 10 meter fibre one. It works on streamed services (e.g Prime / NOW / Apple) but has small sound drop outs. It does not work with Youtube / BBA iPlayer / Channel 4 etc.

Swapped it out for a decent normal 5 meter one (as a test) and all problems gone. But I need 8.5 meters, nearer 9 for the installation.

Question is, is there a proven solution that can extend to 9 meters reliability? I don’t mind replacing the cable with a decent one. Or some form of amplified solution. Or indeed an HDMI Extender or a splitter. But I do need something that can go that bit extra reliably.

Anyone have a solution or overcome this one? 

Or indeed can recommend a high quality Earc/Arc cable that might overcome the issue?

Many thanks in advance

14 replies

melvimbe
Nov 19, 2026 2:27 PM UTC

https://www.amazon.com/dp/B01MUNWD80?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1

 

I am using the above cable without any issues.  Worth noting thought at I’m connecting to an amp, so it’s HDMI-ARC, not eARC, and I’m not trying to get an atmos signal, but it does look like it’s supportted

Translate
Danny
Headliner I
Nov 19, 2026 2:57 PM UTC

Many thanks for the response Danny. Much appreciated.

I have spent last night and 7 hours today on this and had very helpful support from Sonos Tech Support but with out result.

I have in fact the last 5 minutes solved it!

The problem was in my over engineering! I fed 2 fibre option HDMI cables between the LG W6 Zero Connect box and the rear of the TV. These were in fact never to be used, just contingency …. and thankfully I did! 

The W6 is a wireless TV, we installed it a few weeks back. Very nice. But forgor the HDMI outlet for the Arc Ultra. Fortunately this was loomed up behind the set. 

I also didn’t do my homework and didn’t realise there were HDMI length restrictions on the Arc Ultra. Apparently it is 5 or 7.5 meters depending on which sound bar.

Fortunately the Fibre HDMI’s I put in work a treat. Well after 7+ hours forgeting about the orientation and that I fitted 2 spare cables and spent near 7 hours working on the one …. the wrong one!!!! Argh…..

What I can now say is that Arc Ultra will 100% work flawlessly with the right fibre cable at 10 meters. The display end needs a USB power source but that works just fine and is supplied with the cable

This is the right cable and 100% works. Maybe helpful for others falling into this bear trap …. there is a way out …. and at not too pricey an option….

 

 

RUIPRO 8K Full Fibre Optic HDMI 2.1 Cable, Detachable, Armoured, 10 m

 

Moderator Note: Removed hyperlink. Modified in accordance with the Community Code of Conduct.

Translate
melvimbe
Nov 19, 2026 9:13 PM UTC

I do believe Sonos restriction of 5-7 meters is not a hard and fast rule (obviously) but just that they can’t really guarantee functionality and support cable lengths longer than that.  That doesn’t mean they wouldn’t support unrelated issues, just that if you have issues getting a signal to your Arc Ultra, you’d need to verify the issues exists with shorter cables.

 

but it sound like you have a good cable!

Translate
Danny
Palco
Prominent Collaborator II
Nov 19, 2026 8:33 PM UTC

Does Dolby Atmos audio work over this cable?

Translate
Headliner I
Nov 19, 2026 10:31 PM UTC

Yes it does, very well. After setting the fibre up correctly, the sound and impact of the AV, ERA 300’s and dual Sub4’s is very impressive.

 

 

Translate
Airgetlam
Nov 19, 2026 10:00 PM UTC

As far as I’m aware, Sonos has no idea what the cable length is. What it cares about, and reacts to, is level of input. If the cable isn’t able to provide enough signal to the Sonos, the Sonos won’t play. And that’s with either ARC via HDMI (different pin set on HDMI cables) or via analog on RCA inputs, or even optical. It’s all about the level of the signal being presented to the device. 

Translate
Bruce
Headliner I
Nov 19, 2026 10:25 PM UTC

I was told during a very lengthy (and helpful if not a solution) support call with Sonos tech this morning that it was 7.5 m for Arc and 5 meter for Arc Ultra. I spent several hours with them. Think I got that the right way round. They did also state clearly that they do not support fibre HDMI. They did not say it would not work just that they did not support it. I don’t know why that is.

No complaints but that was their answer. Some degree of checking was gone thrugh as I wasn’t thrilled at the prospect of ripping out the two 10 meter fibers and using extenders, ethernet cables and other options raised. And indeed it was proved out to some extent. A budget uni directional HDMI was tried …. I think it was a 10 meter one. It worked but short drop outs and some apps no sound at all. Then we swapped to a 3 meter decent quality copper one …. problem solved. But we have near 10 meters between the input of the TV and the Arc Ultra.

So after the call (and the possibility of returning all the new kit) tried the cable outlined above and after some silly mismatching errors (2 cables connected wrong) … it hooked up and worked perfectly …. 10 meters on removable head fibre HDMI. Dolby Atmos, HDR, and all apps … zero issues.

Translate
Airgetlam
Nov 19, 2026 11:25 PM UTC

‘Support’ and ‘works’ are two very different things. There are a lot of ‘fiber’ solutions that don’t do ARC at all, which is probably why they don’t want to ‘support’ them. I certainly wouldn’t want to deal with the headache of training all the random staff on what and why there is a difference. Makes a deal to those who understand, but merely confuses those who don’t, IMHO. 

Translate
Bruce
Headliner I
Nov 20, 2026 9:56 AM UTC

Wouldn’t disagree with that. And I’ve had a lot of success pushing cable limits past their rating over time. 

But your average Sonos investor probably would not make such a distinction or even want to. And it’s fine when just putting your Sonos gear in a box under the TV for example … but an installation? That’s more complex.

Adding Sonos to a room? Always been a breeze … one of the reasons folks like it. But recreating a room from scratch and installing conduit, eliminating wires etc? That’s a tad more complex.

What many companies do is test and rate and approve associated cables, hubs, switches etc. It’s an overhead for sure but having a list of tested or even approved, cables ‘could’ be a sensible move. In the computer world this is common. Then again, how many folks are pushing those technical boundaries … I’m not sure.

Either way, I agree there’s a difference in the wording. I have no issue with the support I got. It wasn’t a complaint against Sonos Tech at all. But upon reflection and considering your point, there could have been more options. In fairness the option I was given was to ‘add an HDMI switch’ .. a budget Amazon one. It was qualified by the comment ….’it’s worked for some people, not for others’. It didn’t feel like the best way forward although may well have worked.

I don’t know if Sonos have different levels of tech support … I guess they must. And maybe that might have come out at level 2 or 3. 

But with a limited amount of testing, so far, fibre seems be working very well. More detailed testing may disprove. I’ll report back on that. Fortunately sevral draw wires installed over 10 meters over head conduit so experiementation is not as painful as it could have been 😊

 

Translate
Palco
Prominent Collaborator II
Nov 19, 2026 11:53 PM UTC

Personally, I don't think it supports Dolby Atmos audio. It's easy to check—just look at the audio format in the app while something is playing...

Translate
Stanley_4
Grand Maestro
Nov 20, 2026 12:18 AM UTC

The ARC - eARC difference in supported formats has to be kept in mind.

ARC Audio Formats Supported: PCM Stereo, Dolby Digital 5.1, DTS 5.1 (device dependent)

eARC Audio Formats Supported: Dolby Atmos, Dolby TrueHD, DTS:X, DTS-HD Master Audio, Multichannel PCM

 

Translate
106rallye
Nov 20, 2026 8:57 AM UTC

ARC can support Dolby Atmos too.

Since Dolby Atmos can also be played via a compressed stream, ARC should also be capabel of supporting Atmos. As I understand it the diffrence between ARC and eARC is that eARC supports uncompressed Atmos streams.

The difference between ARC and eARC is compressed streams vs uncompressed streams .

Translate
Headliner I
Nov 20, 2026 10:05 AM UTC

It’s fair to say the testing was brief and limited to video streams …. high quality copies of things like Dune, Tenent, Blade Runner 2049 and they did perform with DA …. exceptionally well in fact.

These were on-line streamed versions. And the original sound clipping issues were fully resolved.

In fairness whilst I played some music feeds (and they sounded exceptional) I did not check the DA status.

The TV and system are ‘off wall’ now for some cosmetic open heart surgery …… chiseling downwards through 150mm of engineering brick and behind a mega expensive silk wall covering to a back box with RJ45 in to add the HDMI!!!! Wish me luck!

But late day I will setup and test and confirm the DA status. Either that or I’ll be plastering and fitting a drop of 140cm wide silk wall covering and drinking several Negroni’s! 😁

Translate