Producer I

Answered

Under TV Mount for Beam Ultra?

13 replies
290 views

I’m considering replacing my Beam Gen 2 with the Ultra, however I cannot find adequate information on how I would have to mount it to my TV. My Beam 2 is mounted to my LG TV with this mount: Mounting Dream Soundbar Mount Designed for SONOS Beam

Ideally there would be a mount that could attach to the existing brackets so I don’t have to remove my 77” TV from it’s swivel wall mount. I’ve not had any luck finding information about this. Ideas?.

RangerDogAnswer

Producer I

I went to Best Buy and looked at the Beam Ultra to measure the mounting points. It’s a very oddball 32.3 centimeters or about 12-7/8 inches from center-to-center. The Arc Ultra is a nice, evenly measured 24 inches. Since the two were both on display, along with a Beam 2, I took a listen.

Although there was no ceiling (probably 30 feel high) the difference between the Beam 2 and Beam Ultra didn’t seem all that impressive. However, the Arc Ultra was considerably more distinct. Better bass and much better speech clarity!

As a result, I went home to rethink and this morning decided the Arc Ultra seems worth it. It’s $200 more than the Beam Ultra and Costco is offering a bundle for $13 more than than the $899 it costs everywhere else. For that the bundle includes a $60 Apple Gift Card (which I can definitely use) and a $79 wall Sonos mount voucher plus 30% off Sonos accessories coupon. Then Costco is giving me another $10 off and free same day delivery!

I pulled the trigger on that and expect my Arc in about an hour or so. After checking out the Sonos wall mount it seems like it will be easy to attach it to my current under-TV mount. At most I’ll need to add a couple spacers when I bolt it on. Depending on how quickly I get the wall mount and attach it under the TV, I’ll report back on how that went.

kdowling

Below is from the product guide: Sonos Beam Ultra

Here’s the sonos wall mount: Sonos Beam Ultra Wall Mount

The Beam Ultra has the mounting holes on the back. The Beam Gen 2 has them on the bottom. It doesn’t look like it can work with your soundbar mount. Maybe they’re planning on making one for the Beam Ultra?

Wall mount

Use the Beam Ultra Wall Mount (sold separately) to mount Beam Ultra to the wall below (recommended) or above your TV.

Beam Ultra is not compatible with wall mounts for other Sonos soundbars, including Beam Gen 2, Arc, and Arc Ultra. Using an incompatible mount poses a safety risk.

RangerDogAuthor

Producer I

The TV is mounted in a corner so a wall mount is not a solution (unless it could be mounted to my existing brackets).

E

eracode

Enthusiast II

Sonos are selling a new wall mount for Ultra. Earler Beam mounts are completely incompatible with Ultra. To allow its new upward-firing speakers to work properly, Ultra needs to be mounted at least 15cm/6 inches below the bottom of the TV. It is likely to be inadvisable to mount it suspended from the TV.

RangerDogAuthor

Producer I

My current Beam 2 is positioned just forward of the bottom of the TV and any mount that positions it similarly would be quite ideal both acoustically and aesthetically.

kdowling

I keep looking at that mount. If you removed the platform w/brackets the Beam 2 sits on, you could bolt the Beam Ultra Wall Mount to it. You would need to drill a couple (4) holes. I guess it depends on your ability with that kind of thing. I don’t think I would do it. But I know lots of people that would.

Or ask Mounting Dream if they are planning a new mount for Beam Ultra.

RangerDogAuthor

Producer I

I am thinking about attaching a pair of L-brackets to the rear of an Ultra and then bolting them onto the mounting points of the previous Beam. I just need to figure out a way to cushion the bottom of the Ultra so the brackets don’t scratch things. The mount would allow me to lower the mount a bit more so that’s not an issue.

I’ve been in touch with Mounting Dream and while they don’t yet offer a mount for the Ultra, they have been amazingly responsive and offered to send me bolts and spacers to see if that would work. I am thoroughly impressed with their willingness to help.

Stanley_4

Grand Maestro

I have used Mole Skin, the blister treatment sheets, to make some very nice bracket pads. a touch of laundry marker and they anr a nice deep black.

https://www.amazon.com/Dr-Scholls-Moleskin-Padding-Strips/dp/B097YXFWL4/ref=sr_1_8

T

twrva

Trending Lyricist I

I am in the same situation with my Beam Gen 2 mounted to the TV with the Sanus Soundbar TV Mount designed for Sonos Beam Gen 1&2 (https://www.sanus.com/en_US/products/speaker-stands/wssbm1/).

To address leaving room for the upward firing speakers, I am waiting for Sanus (or someone) to come out with the equivalent of the Extendable Soundbar TV Mount Designed for Sonos Arc and Arc Ultra Soundbar (https://www.sanus.com/en_US/products/speaker-stands/wssatm1/). However to date I have seen no clues that this might be announced. Not to mention the Sanus Extendable Soundbar mount is relatively expensive.

RangerDogAuthorAnswer

Producer I

I went to Best Buy and looked at the Beam Ultra to measure the mounting points. It’s a very oddball 32.3 centimeters or about 12-7/8 inches from center-to-center. The Arc Ultra is a nice, evenly measured 24 inches. Since the two were both on display, along with a Beam 2, I took a listen.

Although there was no ceiling (probably 30 feel high) the difference between the Beam 2 and Beam Ultra didn’t seem all that impressive. However, the Arc Ultra was considerably more distinct. Better bass and much better speech clarity!

As a result, I went home to rethink and this morning decided the Arc Ultra seems worth it. It’s $200 more than the Beam Ultra and Costco is offering a bundle for $13 more than than the $899 it costs everywhere else. For that the bundle includes a $60 Apple Gift Card (which I can definitely use) and a $79 wall Sonos mount voucher plus 30% off Sonos accessories coupon. Then Costco is giving me another $10 off and free same day delivery!

I pulled the trigger on that and expect my Arc in about an hour or so. After checking out the Sonos wall mount it seems like it will be easy to attach it to my current under-TV mount. At most I’ll need to add a couple spacers when I bolt it on. Depending on how quickly I get the wall mount and attach it under the TV, I’ll report back on how that went.

kdowling

Sounds like a great deal for an excellent sound bar. Arc Ultra is surely a step up. Enjoy your new Arc Ultra!

Airgetlam

I’d thought those mount points on the Sonos were VESA specs…although depths may differ slightly.

Bruce

RangerDogAuthor

Producer I

Nope.

Wall mount

Sign up

Login to the community