Skip to main content
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Airgetlam
AirgetlamAnswer
Jan 5, 2024 10:58 PM UTC

If the Beam is connected to the TV via ARC or eARC, then the TV’s remote will work, by sending a signal to the TV, which then passes it to the Beam.

Bruce

6 replies

Airgetlam
AirgetlamAnswer
Jan 5, 2024 10:58 PM UTC

If the Beam is connected to the TV via ARC or eARC, then the TV’s remote will work, by sending a signal to the TV, which then passes it to the Beam.

Translate
Bruce
AjTrek1
Jan 5, 2024 11:48 PM UTC

Hi

Great advice from @Airgetlam. In addition to your TV remote you can also use an AppleTV Remote if you own an AppleTV.

However, I'm a bit concerned because during setup of the Beam 2 with your TV part of the process is to grab your TV remote to complete the setup process. That said...your TV remote should already be capable of controlling the Beam 2 (so to speak) 🤔.  Therefore, why do you ask the question and just exactly how are you trying to control the Beam 2?

If you are trying to control it for volume during music playback when the TV is off….then no remote will work. You will have to use one of the following:

  • The App on your phone or tablet
  • Volume controls on the Beam 2
  • Voice Assistant (if enabled).
Translate
Together Everyone Achieves More = T.E.A.M.
ratty
Jan 6, 2024 10:47 AM UTC

If you are trying to control it for volume during music playback when the TV is off….then no remote will work. 

Incorrect. The Beam will respond to IR commands from any remote that it’s been configured for.

Translate
AjTrek1
Jan 6, 2024 3:07 PM UTC

If you are trying to control it for volume during music playback when the TV is off….then no remote will work. 

Incorrect. The Beam will respond to IR commands from any remote that it’s been configured for.

@ratty 

Good to know. I’ll have try it on my Beam 2 when just streaming music. Just exactly where is the IR receiver located on the Beam 2? 

Translate
Together Everyone Achieves More = T.E.A.M.
ratty
Jan 6, 2024 3:18 PM UTC

If you are trying to control it for volume during music playback when the TV is off….then no remote will work. 

Incorrect. The Beam will respond to IR commands from any remote that it’s been configured for.

@ratty

Good to know. I’ll have try it on my Beam 2 when just streaming music. Just exactly where is the IR receiver located on the Beam 2? 

https://support.sonos.com/en-gb/article/ir-sensor-location-on-sonos-home-theater-products

Translate
106rallye
Jan 6, 2024 9:03 PM UTC

The IKEA Dirigera also works well on Sonos - you need the remote and the Dirigera hub.

Translate