Answer
Connect new Roku remote to playbar
Need help. I have a Sharp Aqus and am using the optical connections. I think I just need the basic setup to work and can’t find it anywhere.
Best answer by Ryan S
Hi Pamalot, the Playbar reads IR for the volume controls, so you'll need to see if your Roku remote is capable of sending volume signals over IR. If you have a model number or other details about the remote, we can check it out here.
There's a thread here with a similar question, it may be for the same version of Roku.
There's a thread here with a similar question, it may be for the same version of Roku.
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
+26Hi Pamalot, the Playbar reads IR for the volume controls, so you'll need to see if your Roku remote is capable of sending volume signals over IR. If you have a model number or other details about the remote, we can check it out here.
There's a thread here with a similar question, it may be for the same version of Roku.
There's a thread here with a similar question, it may be for the same version of Roku.
Hi,
I searched many blogs to fix Roku issues. using this guidance I fixed my Roku issues. And I also referred this blog
https://bit.ly/2VfDvI7
> Remove the batteries from the remote.
> Look carefully into the battery compartment of the remote and locate the purple button shown circled in red, below:
> Unplug the power from the Roku.
> Wait for 5 seconds.
> Connect the power back to the Roku.
> Wait for the Roku banner to bounce around on the screen.
> Put the batteries back in the remote.
> Press and hold the purple button in the battery compartment of the remote for 5 seconds.
> Wait for the Roku to finish booting up.
Now you should be good to go.
I searched many blogs to fix Roku issues. using this guidance I fixed my Roku issues. And I also referred this blog
https://bit.ly/2VfDvI7
> Remove the batteries from the remote.
> Look carefully into the battery compartment of the remote and locate the purple button shown circled in red, below:
> Unplug the power from the Roku.
> Wait for 5 seconds.
> Connect the power back to the Roku.
> Wait for the Roku banner to bounce around on the screen.
> Put the batteries back in the remote.
> Press and hold the purple button in the battery compartment of the remote for 5 seconds.
> Wait for the Roku to finish booting up.
Now you should be good to go.
Fascinating. Would be nice to know exactly what pressing the purple button actually does.
If you’re still having issues, this link from Sonos Support should help to clarify: https://support.sonos.com/s/article/3402?language=en_US
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.