Skip to main content
Contributor I
October 15, 2018
Answered

Add additional front stereo speakers to 5.1

Hey guys,

I've had a 5.1system with sound bar now for a few years and not pressed with the sound bar for music. Any reason I can't create another room and add two more play1’s to the front in stereo mode? Assuming it won't work for HT but at least I'll get fuller sound from the front with music.

Thx
    This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
    Stanley_4
    Stanley_4Answer
    Grand Maestro
    October 15, 2018
    That will work and get you a better stereo image. When playing music you can also switch the surround system to "full" mode to get stereo from your rear speakers as well.

    11 replies

    Stanley_4
    Stanley_4Answer
    Grand Maestro
    October 15, 2018
    That will work and get you a better stereo image. When playing music you can also switch the surround system to "full" mode to get stereo from your rear speakers as well.
    vanjamminAuthor
    Contributor I
    October 15, 2018
    Awesome, thx!
    Chris
    Lead Maestro
    October 15, 2018
    assuming you mean you have a playbar.

    The Play:1s may have a slight delay though being grouped vs. the direct optical input and no delay in playbar.
    Respect the Queue (2)Move (3)Beam (1) Era100 (2)ARC (1)SonosOne (1)Playbar (4)Play5 (4)Play1 (3)Play3 (1)Port (2)Connect (1) Roam (2) Ace (1)Connect:Amp (4)Sonos Amp (1)Sub + (9) Echo + Smartthings; (2)Play)
    vanjamminAuthor
    Contributor I
    October 15, 2018
    Sorry, yes, playbar but I would be grouping for music so hopefully no delay. Thx
    Airgetlam
    October 15, 2018
    There would still be around a 70ms delay, due to the way Sonos deals with syncing across multiple speakers.
    Bruce
    Chris
    Lead Maestro
    October 15, 2018
    Paired speakers in sync - but grouping it is going to cause the others to be 70ms delay creating stadium effect.
    Respect the Queue (2)Move (3)Beam (1) Era100 (2)ARC (1)SonosOne (1)Playbar (4)Play5 (4)Play1 (3)Play3 (1)Port (2)Connect (1) Roam (2) Ace (1)Connect:Amp (4)Sonos Amp (1)Sub + (9) Echo + Smartthings; (2)Play)
    Airgetlam
    October 15, 2018
    Note that we're only talking about the "grouped" rooms. The 5.1 room would be in sync. It's any additional rooms that would have to pay the penalty.
    Bruce
    Stanley_4
    Grand Maestro
    October 15, 2018
    Let me make sure I understand this, if the Playbar and paired surrounds are grouped with another paired set of speakers in the same location there will be a delay in the sound from one set when playing music from the library or streaming?

    I understand the delay in TV mode but when streaming music?
    melvimbe
    October 15, 2018
    I'm with you Stanley. I'm not aware of any delay between grouped rooms when playing from a music source. Though technically not the same physical room, I've never heard any echo effect for music between my bedroom and the bathroom right off the bedroom.
    Danny
    Chris
    Lead Maestro
    October 15, 2018
    If your streaming music via Sonos no there won't be a delay they will be in perfect sync. But if watching playbar via optical port TV then it will have no delay where as the added speakers will have the 70ms delay (grouped to the playbar).

    Sorry if I implied that Sonos music would not be in sync between the 2 grouped speakers. So yes in the case of the original poster if he just used it for music then yes. But as said before - is he in full mode where the rears are putting out full sound??
    Respect the Queue (2)Move (3)Beam (1) Era100 (2)ARC (1)SonosOne (1)Playbar (4)Play5 (4)Play1 (3)Play3 (1)Port (2)Connect (1) Roam (2) Ace (1)Connect:Amp (4)Sonos Amp (1)Sub + (9) Echo + Smartthings; (2)Play)