Contributor I

Answered

Sonos Ace Sleeps/Disconnects after a while in mac (also during calls in MS Teams)

14 replies
509 views

Hey,

I’ve been noticing recently that my Sonos Ace plays a beep sound and suddenly stops playing/recording any sounds.

The weird thing is the headphone is still connected and is selected as the audio source in Mac and Teams, but it just doesn’t work. I either have to turn it on/off, or recently found that switching the audio device in both Mac/Teams gets it back to a working state.

I’m suspecting it’s a sleep/idle-detection issue, where it “thinks” it’s idling and goes into a hibernate mode to save power.

Anyone else has had this issue? It’s very frustrating, specially during some important meetings where it happens.

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

Ken_GriffithsAnswer

I guess you can always toggle ‘off’ the wear detection ‘play/pause’ feature in the Sonos App. I can only guess that some users ‘perhaps’ might have issues with the feature. Possibly some users with longer hair over their ears ‘might’ encounter an issue with it - however that’s just a bit of a guess on my part.

Stanley_4

Grand Maestro

Did you check the alignment of the IR windows inside the ear cups?

S

SpiXyAuthor

Contributor I

@Stanley_4 No not really as I had no idea that’s a place I need to start, or how to do that for that matter, do you mind providing some color ?

Thanks!

S

SpiXyAuthor

Contributor I

By the way, I’ve had the headphone for like 9 days now, so still testing it out, is the “IR window” a thing that’s supposed to become misaligned in such a short time? never had any such issue with my prior headphones (XM-4 and NC700)

Ken_Griffiths

@Stanley_4 No not really as I had no idea that’s a place I need to start, or how to do that for that matter, do you mind providing some color ?

Thanks!

Simply pull off the magnetically attached ear-cups and check the sensor alignment and just ensure they are clean.

S

SpiXyAuthor

Contributor I

I believe you mean the black piece visible in this image? Is the current state aligned? I had to move it like 1-2mm to have them perfectly aligned, but seems after I put them on and off, the hole moves a bit anyway, and I didn’t notice a full misalignment to begin with.

But thanks for the input, I’ll see if it happens next time (the beep into idle) and check if any of the caps have moved further.

I’d appreciate if you could share, whether if there’s any other causes, or if you know of any documentation for that sudden “beep” that gets played before this happens somewhere (on when it gets played and what causes it)

Stanley_4

Grand Maestro

The guide could use a lot more detail: https://www.sonos.com/en-us/guides/sonosace

I’d love to see a lot more necessary (in my opinion) Ace information displayed, and some that is displayed shown in a much more usable location.

Pet peeves are the noise cancellation mode and battery levels. Both should be on the main page, not buried in settings.

Oh and seeing now playing RINCON….. is far less than useful.

Can’t hope for new features when they are in disaster recovery mode.

Ken_GriffithsAnswer

I guess you can always toggle ‘off’ the wear detection ‘play/pause’ feature in the Sonos App. I can only guess that some users ‘perhaps’ might have issues with the feature. Possibly some users with longer hair over their ears ‘might’ encounter an issue with it - however that’s just a bit of a guess on my part.

S

SpiXyAuthor

Contributor I

Oh, that also rings some bells, I have long hairs, and sometimes I just put the headphone on my hairs over the ears, so that might have had something to do with this as well.

Thanks for your insights! I’ll see if this happens again and report back. Still though, I’m very curious about the source of that beep I hear before this happens, is that something you might know? Or know of any documentation on under what circumstances the headphone will generate alerts?

Ken_Griffiths

The guide could use a lot more detail: https://www.sonos.com/en-us/guides/sonosace

I’d love to see a lot more necessary (in my opinion) Ace information displayed, and some that is displayed shown in a much more usable location.

Pet peeves are the noise cancellation mode and battery levels. Both should be on the main page, not buried in settings.

I see the noise cancellation and battery levels shown on the main home page when the Ace room is in focus using BLE ? …and the Ace ANC image (in the App) can be tapped/toggled to switch ANC mode off etc. See attached.

Ken_Griffiths

Oh, that also rings some bells, I have long hairs, and sometimes I just put the headphone on my hairs over the ears, so that might have had something to do with this as well.

Thanks for your insights! I’ll see if this happens again and report back. Still though, I’m very curious about the source of that beep I hear before this happens, is that something you might know? Or know of any documentation on under what circumstances the headphone will generate alerts?

Yes the ‘beep’ occurs as the wear mode ‘play/pause’ feature starts or stops the playback - that’s clearly something the Ace does ’by design’.

Edit - in fact I think the beep is just shortly before the playback starts to show that the audio was started by the Ace wear mode detection feature.

Show more replies

Sign up

Login to the community