Enthusiast II

Sonos is forcing people to buy new hardware as they've broken the Connect:Amp and they refuse to fix it

Forum|Forum|2 years ago
December 31, 2023
294 replies
16586 views

Hi,

I'm recreating this thread, as the discussion wasn't finished, but it was locked. I also wanted to make it obvious this is a Sonos issue, not a client environment issue.

https://en.community.sonos.com/components-and-architectural-228999/connect-amp-keeps-dropping-out-audio-6885634/index2.html

I've been following this for a while because I've been having the same issues, and when I spoke to support they said the connect amp can't cope with modern software and that I should upgrade to the amp, which is clearly unacceptable.

This has been confirmed by people in that original thread who have been told the same thing.

BillJanzen

“FWIW, these issues seem to have occured after the June 2023 software update to S2 version 15.5. Interestingly, there is an alert posted in the release notes of the 15.6 update released July 25, 2023 about adjusting how older Sonos products use their internal memory. See below (copied from https://support.sonos.com/en-ca/article/release-notes-for-sonos-s2): Alerts: With this update, we’ve adjusted how some of our older Sonos products are using their internal memory. Because of this change, updates for Play:1, Play:3, Boost, Connect, Connect:Amp, and Sub (Gen 1 and 2) will take longer to complete than before. The reset process for these products will also take more time to complete after this update.”

BillJanzen

“We continue to have intermittent drop-outs on all 4 of our Connect:Amp devices, so here’s my update after 1.5 hours on the phone with Sonos today. They said the diagnostics for one of the Connect:Amp devices the chose to investigate showed multiple major alerts, including: Cannot allocate memory to full status Write failed Player crashed: out of memory OOM Killer These items all sound like they are related to memory issues with the older Connect:Amp product, as Big Bull mentioned in his previous post.”

Big Bull:

“Ok latest is I powered down 3 of my 4 units and just had the one I use most running hard wired to the router through my switch and it still gave dropouts so I sent 2 diagnostics to Sonos and they said :

------------------

Thanks, so on this one in specific I can see the audio interruptions are caused because the product basically is old, and it is reaching its capabilities, there are some things that can be done to try to reduce the impact of this, but if it continues this product will need to be replaced with the upgrade program.

-------------------

I am being advised to replace any affected units with the Sonos Amp which can be costly.”

Birchan

“ Same problem, 4 AMP of which two lose sound... SONOS did a wrong analysis and accidentally said that there were memory failures in some of the units. But since they only give a 2-year warranty, mine was 2.5 years too old. How can SONOS sell products that obviously have manufacturing problems and then say that they can replace them with a 30% discount on new ones? Wonder if Tesla would sell cars that stop working after 2 years and say, sorry you have to buy a new car every two years because the warranty has expired. So bad from SONOS so I will be discontinuing my SONOS system and switching to BOSE... “

For context, in my situation I have a connect amp, connected via ethernet with WiFi off, and I started to get regular drop outs around June. It's incredibly annoying, the audio will drop out for a few seconds before continuing, if other speakers are grouped they will carry on fine.

It's absolutely 100% not a network issue. When I was debugging it, I briefly made the connect amp the only wired device and turned on WiFi, and other speakers in my house worked perfectly at all times. I've also reserved IP addresses, and I ran a ping monitor on it to check for any network dropouts. There were none. I've put the system back now, so the connect amp has its WiFi off.

So it seems to me that Sonos have released a firmware update that the connect amp cannot handle, and rather than take responsibility for it, they're just fobbing people off telling them to buy expensive new hardware to solve the problem, not even with any substantial discount. It's unacceptable. This connect amp worked perfectly before June.

Sonos needs to release a new update that solves the issue, or give people affected substantial discounts on replacement amps, and formally announce that the connect amp is end of life. Currently people with issues on this forum are being unintentionally gaslighted by well meaning people who don't know that this issue exists. Sonos cannot say the connect amp is supported when they've released a broken update.

People need to know about this issue, I've seen loads of topics about this issue and people get fobbed off with network issues, which is absolutely not the case, at all. Big Bull proved this by doing a replacement to amps which solved his issue.

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

Pinned Reply By Corry P

Hi @britcowboy

Thanks for bringing this back to my attention.

We now consider this issue to be largely resolved, and any remaining cases are being dealt with on an individual basis. If you still encounter the issue described here, I recommend you get in touch with our technical support team who have tools at their disposal that will allow them to give you advice specific to your Sonos system and what it reports.

I hope this helps.

Show previous replies

J

john kallas

Avid Contributor I

So here we are, two weeks in to the S1 rollback.

I’ve had one 8s dropout at the end of a track and that might simply have been a Qobuz issue or a buffering issue as it was the first track on play after being paused from the night before and the track played out the last 8 seconds in the app but without sound - and the next track cued up and played fine, including sound out of the amps.

But as ever, the apps remain responsive and quick to find the connect amps (S2 was terrible for this). Playback (apart from the 8s end of track dropout) has also been seamless and glitch free.

which version of S1 did you roll back to? What website did you use to get the apk file?

A

ANOpax

Enthusiast II

I used the in-built functionality in the Sonos software to manage the hardware roll-back (this feature has now been removed by Sonos). I’m running V 11.12 MacOS controller and 11.14 iOS controller (I accidentally upgraded the iOS version as I always update my iOS apps but have now started updating manually as there is an even later version of S1 controller and I don’t want to take the risk of something breaking!).

C

CareAllende

Lyricist III

I struggled with similar issues for weeks. The reason for sluggish response proved indeed to be simple and in line with previous posts: internal memory ! SONOS isn't telling the truth saying Connect:Amp Gen2 is working with S2. It even struggles working with S1 (frequent music drop outs etc.) The Connect:Amp Gen2 has got only a marginal increase in memory vs Gen1 ( from 32 MB to 64 MB or so...), and SONOS AMP (the new one) got about 20 times (!!) the memory of Connect:Amp Gen2... My advice: put Connect:Amps (Gen1 and Gen2) to the recycle bin, use SONOS AMPs, they will work flawlessly with S2 ... or change brand. The SONOS music quality is bright, the memory issues can be understood from a system point-of-view, but the SONOS communication policy with customers is less than zero, ... and a shame!

C

CareAllende

Lyricist III

Before scrapping my Gen2 Connect:Amp, I was curious about its ingredients. I discovered two 16 MB (16 bit wide) ISSI DRAM chips. This implies the unit operates with 32 MB flash memory, versus some 1024 MB in the SONOS AMP. So indeed the CA is inconsistent with any smooth S2 operation, or even S1 experience.

C

CareAllende

Lyricist III

Manufacturing date was July 2017 …

A

ANOpax

Enthusiast II

Pretty ridiculous that something manufactured seven years ago is now obsolete. And made obsolete by its manufacturer’s own firmware/software updates which add zero functionality.

What’s worse is that the only fix for this (a rollback to S1) has been deliberately removed by Sonos.

Despicable behaviour and symptomatic of disposable culture at its worst.

J

Jonathan.yogi

Lyricist I

Hi,

I'm recreating this thread, as the discussion wasn't finished, but it was locked. I also wanted to make it obvious this is a Sonos issue, not a client environment issue.

https://en.community.sonos.com/components-and-architectural-228999/connect-amp-keeps-dropping-out-audio-6885634/index2.html

I've been following this for a while because I've been having the same issues, and when I spoke to support they said the connect amp can't cope with modern software and that I should upgrade to the amp, which is clearly unacceptable.

This has been confirmed by people in that original thread who have been told the same thing.

BillJanzen

“FWIW, these issues seem to have occured after the June 2023 software update to S2 version 15.5. Interestingly, there is an alert posted in the release notes of the 15.6 update released July 25, 2023 about adjusting how older Sonos products use their internal memory. See below (copied from https://support.sonos.com/en-ca/article/release-notes-for-sonos-s2): Alerts: With this update, we’ve adjusted how some of our older Sonos products are using their internal memory. Because of this change, updates for Play:1, Play:3, Boost, Connect, Connect:Amp, and Sub (Gen 1 and 2) will take longer to complete than before. The reset process for these products will also take more time to complete after this update.”

BillJanzen

“We continue to have intermittent drop-outs on all 4 of our Connect:Amp devices, so here’s my update after 1.5 hours on the phone with Sonos today. They said the diagnostics for one of the Connect:Amp devices the chose to investigate showed multiple major alerts, including: Cannot allocate memory to full status Write failed Player crashed: out of memory OOM Killer These items all sound like they are related to memory issues with the older Connect:Amp product, as Big Bull mentioned in his previous post.”

Big Bull:

“Ok latest is I powered down 3 of my 4 units and just had the one I use most running hard wired to the router through my switch and it still gave dropouts so I sent 2 diagnostics to Sonos and they said :

------------------

Thanks, so on this one in specific I can see the audio interruptions are caused because the product basically is old, and it is reaching its capabilities, there are some things that can be done to try to reduce the impact of this, but if it continues this product will need to be replaced with the upgrade program.

-------------------

I am being advised to replace any affected units with the Sonos Amp which can be costly.”

Birchan

“ Same problem, 4 AMP of which two lose sound... SONOS did a wrong analysis and accidentally said that there were memory failures in some of the units. But since they only give a 2-year warranty, mine was 2.5 years too old. How can SONOS sell products that obviously have manufacturing problems and then say that they can replace them with a 30% discount on new ones? Wonder if Tesla would sell cars that stop working after 2 years and say, sorry you have to buy a new car every two years because the warranty has expired. So bad from SONOS so I will be discontinuing my SONOS system and switching to BOSE... “

For context, in my situation I have a connect amp, connected via ethernet with WiFi off, and I started to get regular drop outs around June. It's incredibly annoying, the audio will drop out for a few seconds before continuing, if other speakers are grouped they will carry on fine.

It's absolutely 100% not a network issue. When I was debugging it, I briefly made the connect amp the only wired device and turned on WiFi, and other speakers in my house worked perfectly at all times. I've also reserved IP addresses, and I ran a ping monitor on it to check for any network dropouts. There were none. I've put the system back now, so the connect amp has its WiFi off.

So it seems to me that Sonos have released a firmware update that the connect amp cannot handle, and rather than take responsibility for it, they're just fobbing people off telling them to buy expensive new hardware to solve the problem, not even with any substantial discount. It's unacceptable. This connect amp worked perfectly before June.

Sonos needs to release a new update that solves the issue, or give people affected substantial discounts on replacement amps, and formally announce that the connect amp is end of life. Currently people with issues on this forum are being unintentionally gaslighted by well meaning people who don't know that this issue exists. Sonos cannot say the connect amp is supported when they've released a broken update.

People need to know about this issue, I've seen loads of topics about this issue and people get fobbed off with network issues, which is absolutely not the case, at all. Big Bull proved this by doing a replacement to amps which solved his issue.

It is a complete disgrace - 6 years of use is not enough time to be offered just a 15% upgrade program for changing to new. I will now never buy Sonos products again and will be advising everyone I know not too - there are plenty of better speaker products on the market

106rallye

Apart from this (hopefully temporary) episode, define “better”.

J

Jonathan.yogi

Lyricist I

Apart from this (hopefully temporary) episode, define “better”.

Seriously a definition in terms of “better” speakers here are just a few - Bang and Olufsen Level, Emerge & Beosound, Sony Altavoz, Ra3000 and ULT speakers, Bowers & Wilkins Formation Flex, Kef LS50

This isn’t temporary - it is a Sonos plan to force people to upgrade unnecessarily

C

CareAllende

Lyricist III

Hi,

I'm recreating this thread, as the discussion wasn't finished, but it was locked. I also wanted to make it obvious this is a Sonos issue, not a client environment issue.

https://en.community.sonos.com/components-and-architectural-228999/connect-amp-keeps-dropping-out-audio-6885634/index2.html

I've been following this for a while because I've been having the same issues, and when I spoke to support they said the connect amp can't cope with modern software and that I should upgrade to the amp, which is clearly unacceptable.

This has been confirmed by people in that original thread who have been told the same thing.

BillJanzen

“FWIW, these issues seem to have occured after the June 2023 software update to S2 version 15.5. Interestingly, there is an alert posted in the release notes of the 15.6 update released July 25, 2023 about adjusting how older Sonos products use their internal memory. See below (copied from https://support.sonos.com/en-ca/article/release-notes-for-sonos-s2): Alerts: With this update, we’ve adjusted how some of our older Sonos products are using their internal memory. Because of this change, updates for Play:1, Play:3, Boost, Connect, Connect:Amp, and Sub (Gen 1 and 2) will take longer to complete than before. The reset process for these products will also take more time to complete after this update.”

BillJanzen

“We continue to have intermittent drop-outs on all 4 of our Connect:Amp devices, so here’s my update after 1.5 hours on the phone with Sonos today. They said the diagnostics for one of the Connect:Amp devices the chose to investigate showed multiple major alerts, including: Cannot allocate memory to full status Write failed Player crashed: out of memory OOM Killer These items all sound like they are related to memory issues with the older Connect:Amp product, as Big Bull mentioned in his previous post.”

Big Bull:

“Ok latest is I powered down 3 of my 4 units and just had the one I use most running hard wired to the router through my switch and it still gave dropouts so I sent 2 diagnostics to Sonos and they said :

------------------

Thanks, so on this one in specific I can see the audio interruptions are caused because the product basically is old, and it is reaching its capabilities, there are some things that can be done to try to reduce the impact of this, but if it continues this product will need to be replaced with the upgrade program.

-------------------

I am being advised to replace any affected units with the Sonos Amp which can be costly.”

Birchan

“ Same problem, 4 AMP of which two lose sound... SONOS did a wrong analysis and accidentally said that there were memory failures in some of the units. But since they only give a 2-year warranty, mine was 2.5 years too old. How can SONOS sell products that obviously have manufacturing problems and then say that they can replace them with a 30% discount on new ones? Wonder if Tesla would sell cars that stop working after 2 years and say, sorry you have to buy a new car every two years because the warranty has expired. So bad from SONOS so I will be discontinuing my SONOS system and switching to BOSE... “

For context, in my situation I have a connect amp, connected via ethernet with WiFi off, and I started to get regular drop outs around June. It's incredibly annoying, the audio will drop out for a few seconds before continuing, if other speakers are grouped they will carry on fine.

It's absolutely 100% not a network issue. When I was debugging it, I briefly made the connect amp the only wired device and turned on WiFi, and other speakers in my house worked perfectly at all times. I've also reserved IP addresses, and I ran a ping monitor on it to check for any network dropouts. There were none. I've put the system back now, so the connect amp has its WiFi off.

So it seems to me that Sonos have released a firmware update that the connect amp cannot handle, and rather than take responsibility for it, they're just fobbing people off telling them to buy expensive new hardware to solve the problem, not even with any substantial discount. It's unacceptable. This connect amp worked perfectly before June.

Sonos needs to release a new update that solves the issue, or give people affected substantial discounts on replacement amps, and formally announce that the connect amp is end of life. Currently people with issues on this forum are being unintentionally gaslighted by well meaning people who don't know that this issue exists. Sonos cannot say the connect amp is supported when they've released a broken update.

People need to know about this issue, I've seen loads of topics about this issue and people get fobbed off with network issues, which is absolutely not the case, at all. Big Bull proved this by doing a replacement to amps which solved his issue.

It is a complete disgrace - 6 years of use is not enough time to be offered just a 15% upgrade program for changing to new. I will now never buy Sonos products again and will be advising everyone I know not too - there are plenty of better speaker products on the market

SONOS used to be a great company, driven by bright innovators always keeping the customer in mind. Now SONOS seems to be driven by investors, pushing the development team to "optimize" short term profit. So again, sales people sell dreams, support engineers fix (or try to fix) nightmares.

Show more replies

Sign up

Login to the community