sonance install

2 replies
132 views
Translate All

I am struggling with how I’m going to bring wiring through stucco wall (no attic or basement) for the amp to be inside my living room. Any ideas would be greatly appreciated

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

Stanley_4Answer

Grand Maestro

Drilling through a stucco wall is simple enough. Simpler if you get the right drill bit for the job.

You will also want wire shields on both ends of the wire to avoid abrading it on rough edges.

Note the hole in the bit for pulling the wire back through the hole, far easier than trying to fish it through after you have removed the bit.

First hits to get you a picture, shop around.

https://www.amazon.com/Bosch-BH2003T-18-Installer-Bit/dp/B00L2592OM/ref=sr_1_6

https://www.amazon.com/Through-Bushing-Insert-Protector-Wire/dp/B00UD076EK/ref=sr_1_5

Stanley_4Answer

Grand Maestro

Drilling through a stucco wall is simple enough. Simpler if you get the right drill bit for the job.

You will also want wire shields on both ends of the wire to avoid abrading it on rough edges.

Note the hole in the bit for pulling the wire back through the hole, far easier than trying to fish it through after you have removed the bit.

First hits to get you a picture, shop around.

https://www.amazon.com/Bosch-BH2003T-18-Installer-Bit/dp/B00L2592OM/ref=sr_1_6

https://www.amazon.com/Through-Bushing-Insert-Protector-Wire/dp/B00UD076EK/ref=sr_1_5

Translate

R

RJA23Author

Contributor I

Thank you

Translate

Sign up

Login to the community