Components & Architectural

I am helping my father-in-law, her has an old Connect:Amp. It seems to be working to play music via the app, and I get output via the subwoofer port, but there is no Left or Right channel from the amp. Normal run is into the house speakers, but I have tried connecting a speaker directly and still no joy. So it looks like the amp is dead on both channels. I am not familiar with Sonos products, but is there anything else to reset or settings that would prevent this? As a side note I have not been able to configure anything because he does not know his password for Sonos (he is 81 with Alzheimer's). So at some point I will need to claim these devices (Connect:amp, Play:3, Beam Gen 2, Sub Gen 3) under another email without them being released from him. If that’s not possible then these gen1 devices are probably just junk at this point.

I have sonos systems in two different internet locations/houses. Prior to the update, my app would identify my system automatically. Now I have to re-join a system when I change locations. Is this something that others are experiencing or is being or has been addressed? I also have serious lag when using volume controls but looks like others have posted about that already.  

Hallo, mein Englisch ist nicht gut genug für diese Korespotenz.Ich habe eine neue ARC und konnte Sie einmal in die App einbinden aber nicht das andere Sonos Equipment und ich hätte App-Darstellungsprobleme. Daraufhin habe ich die App gelöscht und neu installiert und da wurden die zwei ERA 300 und der Sub dargestellt, die ich dann über die App eingebunden und gruppiert habe. Seitdem ist die ARC weder sichtbar noch mit dem eingebundenen Equipment verbunden.Also ist die ARC nicht mehr erreichbar Die Lautstärke des dreier Equipment kann ich zwar erhöhen aber die App regelt es wieder automatisch auf 15% Der Fernseher gibt den eigenen Ton kurz wieder, drehe ich die Lautstärke auf bis ca. 55 (eingebundene Lautstärke von ARC) ist ARC hörbar aber das eingebundene Equipment nicht. Auch nervt es, an den Fernseher immer wieder die Lautstärke hochzudrehen, geht hier irgendwie eine feste Einstellung?Die ARC ist an LAN dauerhaft mit einer eingebundenen festvergebenen IP-Adresse angeschlossen und ist

I know people have posted about this but there doesn’t seem to be a real clear answer.  I have a sonos amp in my basement.  I have an outdoor project that is not ARC or E-ARC.  From what I have found there is still a way to get my outdoor projector to play out of my B&W outdoor speakers.  Something along the lines Amazon firestick in HDMI audio extractor extractor into HDMI to optical sonos adapter and then on the other end HDMI into my amp? Also, I plan to use an outdoor weatherproof box because the distance from my outside to my amp would need about a 75 ft HDMI cable.  I want to have a splitter so I can run two shorter cords.  

My current setup: den with TV → Ethernet to Port input → RCA output to 5.1 receiver DVD input2 other Sonos Amps running various other speakers, and 1 Arc soundbar (on a different room’s TV) on my household Sonos ecosystem.  I have the den TV connected to the Port to enable TV sound over all Speakers throughout the house. My question is can I add a Phono / turntable to the existing Port using RCA, thereby connecting into the 5.1 receiver and integrating into the Sonos system? I would essentially have 2 inputs into the Port that way.Or would the better solution be to remove the den TV ethernet connection to Port, connect the Phono into the input side of the Port using RCA, and then when I want whole-house TV sound, utilize the soundbar from the other room’s TV?  My den TV’s picture is not always sync’d with other rooms TV’s so I’d prefer to keep it as the main source of Sonos TV whole-house sound if possible, because it is most likely the TV that we will be watching.

I currently have my turntable connected to my sonos speakers via the sonos port. But it’s very quiet. Can anyone please tell me how I add my Yamaha amplifier?? 

I have 2 feature requests: allow Sonos Amp (Moderator note: corrected from Sonos Sub) to connect to wireless front speakers. Not all setups can use a soundbar (eg TV over fireplace) allow hdmi remote to control volume of grouped Sonos speakers based on community feedback and web discussion, these features would be useful to many thanks.

The audio coming from my Sonos port is delayed compared to the rest of my Sonos speakers. Is there a way to sync it?

Simple setupPC hard wired to routerrouter hard-wired to ZoneBridge 100ZoneBridge 100 transmits to ZonePlayer90ZonePlayer90 - DAC - integrated amp - spkrsWhen it's working properly PC Network showsPC - XPS8700Sonos ConnectLinkSys WRT54GL routerSonos BridgeWhen it cuts out, Sonos Connect is missing, apparently because it's not connected, but does it refer to a specific device?I do not have a smart phone, but I occasionally use the Sonos Controller 200.This setup has been working for many years, but the disconnects are becoming tiresome. Incidentally, the disconnects began after I updated the sonos Controller S1 to Version 11.14  Build 572150280 

The playback indicator (the little animated graph) that moves when a speaker is playing a source is no longer being displayed in iOS app.  

So we just moved into a new house with a Sonos system installed. I have hard wired the ports into the eeros router and they showing up on there. I go through the set up and get to the stage that says push the button to continue. I press and press and nothing happens? What am I doing wrong lol I cannot get past this step 

I have several Sonos speakers and all are powered, like a remote, play 1, play 5, etc. and i have been using an Amp but it failed recently. So i was wondering if the Port could be used instead. I have an Audio-technica AT-LP120-USB Direct-Drive turntable with a line-in pre amp. it the Sonos Amp overkill? Would the port work? I also have a bridge to connect everything using WiFi. thanks from Panama 

Hi, since the new S2 App I can not find Autoplay for line in, I have a Amp and Port that was set for Audio Input autoplay to certain zones, can not find that feature

After using Sonos S1 for over 10 years, the Bridge finally stopped working properly. It was gradual. Lately my stereo pair (S2 compatible) stopped playing music. Luckily, I had purchased a spare Bridge a few years ago. All components are working properly now, but the new bridge has green and white flashing lights. I haven’t been able to figure out how to stop this. Thanks all!

Cómo le hago para resolver el código 803 en un sonos player ZP80? Moderator edit:Google Translate-How to resolve the code 803 into a sonos player ZP80? 

The Sonos app doesn’t show “audio in”; it’s just blank on the “Sonos System Info” screen even though there is audio playing.My source is an Apple TV 4K, connected to an LG OLED TV with audio passthrough enabled, and my Sonos Arc is connected to the TV’s eARC port.When I had a Sonos Arc in the past (I recently moved and got a new one), and was using the “old” app, the input type would show on the “Sonos System Info” screen. Is this just another “bug” in the new app, or something else?Thank you in advance for your insight.

I’m having an issue with speaker groups changing randomly. I have my turntable connected to an Amp (current version) and a new grouped speakers. Everything works surprisingly well usually, however everytime I flip a record the grouping goes haywire. Instead of Amp being the primary it switches to another speaker, even though sound is only coming from the Amp and the other speakers are silent.

How can I connect Sonos Play:5 Gen2 and Play:1 speakers to Pioneer PLX1000 or Stanton STR8 150 MK2 turntables as an addition to my speakers setup? Do I need a particular cable that connects from RANE TTM 57SL or ECLER NUO 2.0 mixer straight to the Sonos or from DENON AV to the Sonos?

A few users have asked after an SSD-only NAS and I’ve commented that such a thing does not exist in the consumer space. I was mistaken. Voilà, the Asustor Flashstor 5 model FS6706T!https://www.asustor.com/en/product?p_id=79 Barebones unit is $450 and accepts up to six SSDs. Add 4TB M.2 PCIe 3 SSDs for about $225 a pop.

Hi. Looking at 6 inch sonance ceiling speakers, and was also looking at 2nd hand ones too due to budget.  There seem to be so many different model numbers.  Most websites do not even state what model numbers they sell and it's typically only 1 6 inch option. Are the different model numbers just different models over the years or are there actually a choice.  The bundles with the amp prices seem to vary so much but not sure if this is due to a cheaper sonance speaker or just a genuinely good price, I can't tell because they don't state what model the sonance speaker is.

I absolutely love my Five speaker….the quality while playing vinyl (and anything else) is amazing! Randomly I get a low rumble when playing vinyl (never had it happen when streaming music). I have read others having this issue….wondering if anyone has found a solution? It's so frustrating and seems hard to replicate to troubleshoot. When it happens though it's unlistenable. Any thoughts?

What new product will replace the connect amp?

Will the ECB work on my Sonos connect?

I am unable to connect the amp. I tried the alternate way as well but no luck. It’s plugged in but not don’t see any light. I need the amp for my turntable connection. What can I do to connect?

I have my Port connected to a Synchro-Mesh via the digital out, and the Synchro-Mesh via toslink to my AMBEO soundbar. The question is this - it seems that virtually any other soundbar does not have an optical input any longer; if I wanted to go to a different soundbar in the future, would it be possible to use an HDMI to toslink converter, but using it instead to convert the optical output to HDMI?