Skip to main content
Trending Lyricist I
December 12, 2020

ASUS RT-AX86U & SONOS CONNECTION ISSUE SOLVED!

  • December 12, 2020
  • 96 replies
  • 38780 views

I’m posting this in hopes of saving someone else from the hours of frustration I’ve endured to resolve this issue.

From the time I set-up my Arc + Sub + Surrounds system in July with an Asus RT-AC88U router (connected to Fios Gigabit internet) it has worked without issue. I’ve used Asus Smart Connect with all settings at default. No problems with the S2 app and no problems when I upgraded to an iPhone 12, other than the loss of Trueplay support, which continues to be a problem. (HELLO Sonos! Anyone home?)

Then I recently upgraded to the RT-AX86U using same Smart Connect default settings and, initially, all seemed fine. But soon the dropped connections started. I’d reboot and the Sonos system would connect for 10-30 minutes, then lose wifi connection again. Meanwhile, all other wifi devices in my home worked just fine--the Sonos was the only problem child. 

I did all the troubleshooting I could, then called into Sonos support and spent almost 2 hours with a tech rep trying every potential solution possible, but nothing worked. (However: KUDOS to such extraordinary tech support!) He then escalated the issue to an appointment with the Senior Support Team. 

Meanwhile, I went into the router settings once again, looking for anything that might be an issue--even though I had gone through them all with the tech rep, and these were all the same settings that had worked on the AC88U. On a whim, and not expecting it to help, I turned off the QoS feature, which I have set to prioritize bandwidth for media streaming over other tasks. BINGO. That was it. Sonos system has stayed connected ever since. I can’t explain why that would be a problem--I’ve always had the QoS set that way, and with gigabit service, an AX router, a modest load of wifi clients in my apartment and no gaming, there should be bandwidth aplenty. But that was the issue and it’s finally solved. 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

96 replies

Lyricist I
March 25, 2021

Just got home and connected to wifi and it's still working on the app so fingers crossed one of the above settings has somewhat remedied it. At this point once a week dropouts would be great. Early days but I'll update this post if anything further develops.

Lyricist II
March 25, 2021

I might try to use the Merlin asuswrt firmware this weekend, but it also sounds like people are having to disable numerous options that are important for my situation.  We live in a terrible wifi environment with a big mix of devices (Sonos, google TV, two people usually WFH on laptops, phones, etc).  Smartconnect and auto channel selection are a big help in keeping everything connected and humming along.  As it is I just had to run a cat5 cable down the hall to keep my partner online during her work meetings.

A thread I found on the small net builder forum said the wifi driver part of the asus firmware is closed source.  So even in the asuswrt builds I think that’s a black box.  I am interested to hear how things are working for people.  I just don't have tons of time available where I can bring everything offline to screw around with this stuff.

Trending Lyricist I
March 25, 2021

Brufleth, I’m having good success staying connected and run my AX-86U with SmartConnect on, so I would rule out SmartConnect as the cause of the issue. I do think that setting the control channel on 2.4GHz band, as opposed to auto, might be important, but hard to know for certain. What we do know is that the 2.4GHz band can be especially problematic in terms of interference, and that the three channels which don’t overlap other channels are 1, 6 and 11. I picked 6, but all three would be worth trying. 

Fyi, I used to have QoS turned on, with media streaming as a priority, but I now keep it off. Whether that’s important is hard to know, I’m just keeping the settings that have given me the best results for keeping Sonos connected. 

Lyricist II
March 26, 2021

I'll give this a try hopefully this weekend. I wonder if setting that 2.4GHz channel is really what's important. Sounds like it might be the key to at least getting merlin working dependably. Thanks! I'll let you know how it goes.

Lyricist III
March 26, 2021

Besides, disabing the Guest Networks and turning off 802.11ax/ Wi-Fi 6 modes for both 2.4Ghz and 5Ghz, I also have the following:

SmartConnect disabled

QOS disabled

Airtime Fairness disabled

Universal Beamforming enabled - some people have said to disable this, but I’m not sure.  Disabling didn’t seem to do anything.

Control Channel set to Auto

With these settings, my Sonos devices stay connected.  Do any of you have the Guest networks enabled?  I will try this weekend to enable the Guest Networks and Wi-Fi 6 and set the channel to 6 and see if it works.

Trending Lyricist I
March 26, 2021

I can confirm that I have had almost constant connection to Sonos for over 2 months now with the following enabled:

SmartConnect

WiFi 6

So I would cross these off the list of settings that might be causing problems. 

Lyricist III
March 28, 2021

I changed my settings yesterday to enable Wi-Fi 6 for 2.4 and 5ghz bands and set the control channel to 6 for 2.4 Ghz while leaving 5ghz set to auto.  That seems to make things stable as long as I keep the Guest Network off.  If I turn on the Guest Network, my Sonos speakers continue to lose connection.

Trending Lyricist I
March 28, 2021

Interesting! So it seems that Guest Networks enabled is at least one of the settings that causes the dropped connection issue. I think I’m up to almost 2 weeks without losing my connection even once. By the way, if your connection does get dropped, try cycling the power switch on the ASUS router to restore it. I’ve been finding that I mostly don’t have to reboot my Sonos system any longer to restore the connection—just the router. The Arc comes back online pretty quickly, but the Sub and Surrounds take a while longer. 

Lyricist III
March 28, 2021

I changed my settings yesterday to enable Wi-Fi 6 for 2.4 and 5ghz bands and set the control channel to 6 for 2.4 Ghz while leaving 5ghz set to auto.  That seems to make things stable as long as I keep the Guest Network off.  If I turn on the Guest Network, my Sonos speakers continue to lose connection.

Just an update.  My Sonos Beam disconnects off and on with these settings …. it definitely seemed more stable with Wi-Fi 6 disabled.

Trending Lyricist I
April 6, 2021

A couple of updates:

After two weeks of no dropped connections, I had three over the past week. Who knows why. But the fact that 3 drops in a week is now highly unusual is a sign of how stable things have been. Also important: restoring the connection never involved a reboot of any Sonos components--I just cycled my Asus off and back on to restore it, 

Merlin has posted a new finished release of Asus firmware: 386.2.0. Against my better judgement I installed it--there was a voice in my head yelling, “Leave well enough alone!” But so far, so good. When the router rebooted after the firmware updated, Sonos system reconnected without issue or me having to do anything. Which is how it SHOULD work, of course, but I wasn’t sure what to expect. However, since Merlin’s releases are focused on bug fixes to the stock Asus firmware and performance improvements--as opposed to adding new features and thus additional bugs--the Merlin releases are pretty solid.