Skip to main content
Trending Lyricist I
December 12, 2020

ASUS RT-AX86U & SONOS CONNECTION ISSUE SOLVED!

  • December 12, 2020
  • 96 replies
  • 38777 views

I’m posting this in hopes of saving someone else from the hours of frustration I’ve endured to resolve this issue.

From the time I set-up my Arc + Sub + Surrounds system in July with an Asus RT-AC88U router (connected to Fios Gigabit internet) it has worked without issue. I’ve used Asus Smart Connect with all settings at default. No problems with the S2 app and no problems when I upgraded to an iPhone 12, other than the loss of Trueplay support, which continues to be a problem. (HELLO Sonos! Anyone home?)

Then I recently upgraded to the RT-AX86U using same Smart Connect default settings and, initially, all seemed fine. But soon the dropped connections started. I’d reboot and the Sonos system would connect for 10-30 minutes, then lose wifi connection again. Meanwhile, all other wifi devices in my home worked just fine--the Sonos was the only problem child. 

I did all the troubleshooting I could, then called into Sonos support and spent almost 2 hours with a tech rep trying every potential solution possible, but nothing worked. (However: KUDOS to such extraordinary tech support!) He then escalated the issue to an appointment with the Senior Support Team. 

Meanwhile, I went into the router settings once again, looking for anything that might be an issue--even though I had gone through them all with the tech rep, and these were all the same settings that had worked on the AC88U. On a whim, and not expecting it to help, I turned off the QoS feature, which I have set to prioritize bandwidth for media streaming over other tasks. BINGO. That was it. Sonos system has stayed connected ever since. I can’t explain why that would be a problem--I’ve always had the QoS set that way, and with gigabit service, an AX router, a modest load of wifi clients in my apartment and no gaming, there should be bandwidth aplenty. But that was the issue and it’s finally solved. 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

96 replies

Trending Lyricist I
February 22, 2021

Hey @Evielwine, the only way I managed to get things working again is back to the old firmware ( Version 3.0.0.4.384.9318 ). No issues every since. Unfortunately the changes I made above only lasted a few days before things disappear again.

 

Here is the link to the Bios.

https://www.asus.com/au/Networking-IoT-Servers/WiFi-6/All-series/RT-AX86U/HelpDesk_BIOS/

Lyricist II
February 22, 2021

Hey @Evielwine, the only way I managed to get things working again is back to the old firmware ( Version 3.0.0.4.384.9318 ). No issues every since. Unfortunately the changes I made above only lasted a few days before things disappear again.

 

Here is the link to the Bios.

https://www.asus.com/au/Networking-IoT-Servers/WiFi-6/All-series/RT-AX86U/HelpDesk_BIOS/

Thank you @altyz, I purchased this router mainly because of the AIMesh function, I really don’t feel like downgrading firmware where all other things are working well except Sonos… I guess as interim every time when I want to use Sonos, I just have to reboot first… :(

Contributor I
March 18, 2021

Try to factory reset the router after firmware update, it worked for my Asus RT-AX58U router. My Sonos Beam always disconnecting from wifi before and after firmware update until I did the factory reset thing.

Lyricist II
March 19, 2021

Still sitting on firmware that's from October because Asus can't play well with Sonos.

Sonos should probably encourage customers to go for other router options. I would have chosen something else had I known.

Trending Lyricist I
March 23, 2021

I have not used stock Asus firmware in years--I always use the Asuswrt-Merlin firmware from rmerlin, and many Asus users swear by it. It’s also free, which is great, though rmerlin does accept donations. If you’re not familiar with it, Merlin isn’t tweakware for tech geeks--the focus is on fixing bugs in the stock firmware, better overall stability and improving performance. The interface is almost a duplicate of Asus stock. And Merlin now supports the AX-86U. (I suggest using the latest version in the “Release” folder, not the Beta folder) Since I started this thread 3 months ago, my general experience has been that I lose connection to Sonos Arc system about once a week. The fix is generally easy: turn the Asus off, wait a few seconds, turn it back on. The connection to Arc is usually restored. (First the Arc shows up in the Sonos app, then Subs and Surrounds within a minute or a few at most.) Occasionally, maybe once a month, I’ll have to reboot the Arc, too, to reconnect, but never the Sub or Surrounds.This isn’t perfect, but the hassle is minimal, and a far cry from the constant drops that I was experiencing for a while. 

Lyricist III
March 23, 2021

I have the AX86U, using the latest firmware 3.0.0.4.386.42095. For me to get things to work with my Sonos speakers, I have to turn off the guest network and the 802.11ax / Wi-Fi 6 mode for both 2.4 and 5 ghz.  I’ve been working with Asus since the 3.0.0.4.386.41535 version broke Sonos to try and get this fixed.  They can’t seem to figure it out.

Lyricist II
March 23, 2021

I'm willing to try the merlin build, but I'm not holding my breath. I'll make sure I can still get the old firmware, or still have it saved, before I give it a go.

Other than the sonos issue, I can't complain about the asus firmware.  Since the sonos speakers are used all the time, that's a pretty big issue. Since we're mostly wfh, having a good reliable home network is super critical though. Maybe merlin can deliver.

Trending Lyricist I
March 23, 2021

A few things I’ll note about my AX-86U settings--not sure any of this is relevant to the performance I’m getting, but fyI--and if you want to know about any other settings, please let me know and I’ll post.

I use SmartConnect so 2.4 and 5GHz bands appear as one network name and the Asus directs traffic to the “best” band in real time. Or so they say, lol. 

Guest networking is off--not because of Sonos, I just don’t need one. 

2.4GHz control channel is set to 6. I’ve had problems with Sonos connections when control channel is set to Auto. Of course, hard to say definitively if the Auto setting IS what causes the dropped connection issues, but it “seems” to contribute to them. Since I’m having good results with 6, I’m sticking with it. 5GHz is set to auto, but not a factor since Sonos in 2.4GHz only. 

I am not in a wifi friendly environment--I live in a 250 until apartment bldg in NYC, so plenty of wifi usage around me… but this was never an issue with my AC-88U. 

Lyricist I
March 25, 2021

Just wanted to add to this as I’m having the same issue with my setup (RT-AX86U, Arc + Sub Gen 3).

Constant dropouts of the gear within the Sonos app > reboot fixes it for all of 5 minutes.

I’ve just updated to Merlin’s latest beta firmware > factory reset the router then reapplied my existing config settings.

Not using smart connect.

Disabled QoS, disabled STP, disabled Airtime fairness.

Set my 2.5GHz channel to Band 6, 20 Hz, disabled wifi 6.

Was working overnight and will check again this evening after spending 12 hours at work but suspect the issue will remain.

 

 

Trending Lyricist I
March 25, 2021

I’ve stuck with Merlin’s latest “Release” version of the firmware. I see he has posted a couple of beta builds of what will become the next release version when finished, But since I’m now only getting a dropped connection once a week—maybe twice on occasion—I can easily live with that and don’t want to chance messing it up. I remember what it was like when connections dropped again within 5 mins after a total reboot—that was really painful.