Components & Architectural

Looking for guidence on how to connect my Audio Technica Bluetooth® turntable (AT-LP60XBT) to my BEAM soundbar. Would appreciate any advice you’d like to share. 

Hi, my system (two original play 3s, two original play 5s, a connect amp, & a sub) are at present connected via a Sonos bridge. There is also a NAS drive that contains my music library connected via an Ethernet cable direct to my router.  I’ve just switched ISP & their new router is now in a downstairs location where I am unwilling to plug in the NAS drive due to it being so noisey when it powers up! I basically need to re-set my system connected to the new WiFi network & was wondering if I could connect the NAS into the bridge rather than the router? I realise it’s old no longer supported technology but seems to be working ok so intend to keep using it. Any suggestions please?  

Hi, I have a Sonos 5.1 speakers set and I am pretty happy about the experience. I am looking to buy a music streamer now, because I understand this will improve the experience with digital music. Since the Bluesound node is deemed superior to the Sonos connect, I wonder what happens if I connect the Node to my speakers. Will I get the 24 bit audio quality of the Node, through its DAC, or Sonos will downgrade it? In my experience so far, I get that downgrading if I use the Sonos app directly hooked to the speakers via wireless, but I don’t if I go through an external DAC.

Towards the end of last year I was being offered the trade-up deal on my “Connect”. I didn’t have time to deal with it around Christmas so I left it. Having heard recently about software upgrades being terminated for legacy products, I went back to take another look.  I was surprised to find that my “Connect” is now described as a “modern product” and the trade-up offer appears to have been withdrawn. What’s going on here? How can my device be more up to date now than it was last year?  

Hi , is the connect model s15 a modern or legacy product

I have the Sonos Port with a turntable and I would like to stream the turntable to my One SL’s and Apple TV and other AirPlay2 Speakers (Libratone Zipp), but I do not see that this is possible - am I missing something? All I can do is stream to Sonos speakers from the Sonos Port. Is there even such a device in existence that can take an analogue input and then output that signal to AirPLay 2 speakers? I do get that an iPad/iPhone can AirPlay out to certain Sonos devices - and I CAN stream audio from my Apple TV to the Sonos One SL’s. therefore making those Sonos devices considered “AIrPlay 2 compatible”, but I think I’m looking for something that doesn’t exist. 

This image on this post comes from the Sonos in-ceiling speakers manual.   How is this set up accomplished?  

Hi allI am a complete technical dinosaur and need help!I want to purchase a turntable for my husband and have worked out that I need one with a built in preamp. That’s as far as I get because I now need to know whether we can use with our current Sonos set up.Can I plug the audio technica LP120XUSB into a Sonos Zone Player ZP100 in order to play through my Sonos speakers? We have 2 of these but only using one at the moment which works the built in ceiling speaker I think!. In the same space we then have 2 extra Play 1 speakers which pad out the sound a bit, as it’s a large room. if anyone has advice (in simple language) I’d be ever so gratefulmany thanks!

I have a Sonos Port that connected to my Onkyo 585 Receiver.  My Port is connected to both my Onkyo and my turntable.  When playing a record on the turntable, I get music through my Onkyo surround sound speakers that are hardwired to my Onkyo receiver.  I also get sound to my all my Sonos speakers scattered around the house.  It’s nice - play a vinyl record in the living room and hear it throughout the house. The problem is that I have to set the volume on the Onkyo for the living room speakers (all other Sonos speakers are controlled easily by the Sonos App).  I set the line out to Fixed in the Sonos App, which should allow me to control the Port volume with the Onkyo remote or knob, but when I try to adjust it I get “volume set by Sonos” on the Onkyo receiver display. How do i control the volume of the Port with my receiver controls?

Recently purchased Play 5 and Rega Plana 1 Plus turntable with built-in pre-amp.  When turntable is powered on, Play 5 has significant hum.  Music from vinyl comes through, although the hum persists.  No hum when Play 5 is set to streaming music via Wi-Fi. I’ve adjusted the line-in volume to multiple settings.  I have (I believe) a high quality 3.5mm to RCA cable.  Any troubleshooting suggestions?

I'm considering an aftermarket purchase from ebay, but would really like to know if the product(s) have been previously recycled.      I'd also like to know how to tell if a product that is being sold for parts, actually doesnt work, or if it is user error and they are just fed up with the tech part of sonos.  

I have just removed my bridge from my setup and all working fine on a wireless basis. This was originally due to the bridge failing (it was actually the power line (which can be replaced)). Is there any alternative use for the bridge eg to extend wifi? Any polite thoughts appreciated.  

Anyone care to share his/her experience? Sound quality, possible delays, anything worth while mentioning? Replacing my Arcam amplifier with the Connect should preferably not result in material, notable loss of sound quality. Because that will trigger disappointment and frustration.     Got Dynaudio Audience 72 S speakers, following specs: System type2-wayEnclosure typeBass reflexFrequency response ± 3dB28 - 26000 HzNominal impedance4 OhmAmplifier Requirements10 - 250 WSensitivity (2.83V/1m)86 dBTweeter28mm (1") soft domeWoofer2x17cm (2x6.5") MSP coneDimensions (H x W x D)959x204x256 mm / 37.7x8x10"Weight16.5 kg / 21 lbs

I have a Bose Acoustimass 7 system with 5 double cubes and a powered sub. I want to add to Sonos system with new Sonos Amp. Possible? Issues? thanks

If I buy the Sonance ceiling speakers to use in my kitchen and connect them to the Sonos AMP do they have to play in a left/right stereo pair configuration or can they be configured to provide a mono type output similar to a single stereo speaker?  I cannot place the speakers such that the listening positions will be right for a stereo pair output.  I could use a couple of single stereo speakers but I have a slopped ceiling and I don’t see that any of those have pivoting tweeters.     

I have just received a new Sonos 5 which I ordered after I was led to believe that my existing “legacy” Sonos 5 woud no longer operate as from May this year. Will the legacy product continue to work following the Sonos change in policy or I have I been suckered into buying a new product unnecessarily? My system is telling me that my device will “deactivate in 8 days”. What does that mean for ongoing use of the device?? Like many others, I have spent a lot of money on Sonos products over the years and I am extremely frustrated and disappointed by what has gone on here.

Currently have a Sonos Amp, and a Klipsch KSW 12, barely getting any bass from device.  I realize that the Sonos is rated 8ohm, and the sub is 4 ohms.  Have tried to turn power all the way up, phase is both set to zero.  Have tried just LFE single connection, and also tried a 2-in-one connection.   Wondering what issue might be?

I have a Sonos Port going into high end amplifier/speakers.  Has anyone had success adding additional components to improve the sound of the Port (or Connect)? I was thinking of maybe an external DAC or Preamp - but something that would maintain volume control within the app.  Has anyone had success with this? It seems most external components (DAC/Preamp) would move the volume control to the upstream device itself, and not from the Sonos App.. Dave

Hi All, I am a DJ wanting to connect my turntable and mixer to the Sonos speakers. I know through Sonos Connect there is a delay between the music played through the headphones and the actual music played out on the speakers.  I have just noticed Connect has been replaced with Port so I am wondering if maybe this delay issue has been fixed with Port.  Thank you 

Hello, I am looking for a replacement power supply for the sonos port. Does anyone have recommendations ? The user manual specifies : ”Use only the included power supply (using a third-party power supply will void your warranty).” but there is no replacement sold on Sonos’ website…   I am pretty suprised a how fragile the power suplly cord is for a unit of this price.

I opted to replace my ZP80 that I feel like I’ve had forever and take advantage of the 30% off deal. Pretty simple configuration: The ZP80 was connected to my Denon AVR 4306 via the digital optical connector. I only used it to stream audio from SONOS to my Golden Ear speakers. So out with the ZP80, in with the Port, digital coax out to the Denon, retraining myself on assigning inputs on the Denon. It sounds awesome, me thinking there’s a definite difference in quality from the ZP80 set up. But I wonder….is that my $ rationalizing? Would analog out from the Port be a better option? Having gone full-on streaming long ago, the only other input into the Denon is a Blue-ray player so, unless I wanted multi-room FM audio, I can’t think of another use for the Port at this point. Thoughts? Suggestions? Thanks!

Hello Sonos, For the past few years I've used the line input on a Connect:Amp to power a left and right wired speaker with no issues. Recently, I started to notice a clear and obvious major delay from the line input source to the wired speakers. I do not have any other Sonos speakers connected wirelessly. I originally thought this was from my computer or a USB preamp I have for conference calls, but if I test the actual wired input (1/8" male jack from my computer headphone out to RCA left/right male in to the Connect:Amp) simply by touching the input to hear a buzz...there is now a 5 second delay to the wired speakers. This was not the case for 5+ years and just started happening about 3 weeks ago. I should note that streaming music from Apple Music or Spotify has no delay...I can press start and stop and the music stops immediately and pairs with other Sonos Play:1 and 3's I have. Only when I use the line input directly to the wired speakers is there an issue. Is there a new fi

I just moved a speaker to another room. How do I change its name so I don't have multiple speakers with the same name?

Hi   i have invested heavily in Sonos and have 2 x Connect Amps, 4 connects and 2 x Sonos 1’s as a stereo pair.    I want to add AirPlay to my setup so am thinking that if I add an Apple Airport Express, which now supports AirPlay 2, I should be able to stream content from my iPhone to my Sonos from apps such as BBC Sounds?    Will this work or have I got this wrong?   Thanks   James

Sonos has just advised me that my ZonePlayer 100 will become a “Legacy Product” after May and will no longer be supported with software upgrades. Must I, in fact, replace it with a qualifying component if I want to continue driving my treasured Vienna Acoustics speakers as part of my Sonos system? What will happen if I leave the ZonePlayer in place? Will the rest of my system (two One SL’s & a Play 1) be affected negatively? The ZonePlayer still works perfectly, and I can't afford a new AMP amplifier, which will simply do the same thing and offer a bunch of other options I don't need. Will appreciate some advice.