Components & Architectural

Hello I want to connect a turntable to a ZP90 with a Move speaker. Do I need a turntable with a pre amp?

Can someone confirm that the Sonos Port (which requires a 3rd party amplifier) is NOT compatible with a Sonos Sub?  I believe the reason for this is that the Sub must pair directly to a Sonos component that has built in amplification (Amp, Sonos speakers).  A Sonos port cannot plug directly into a third party amplifier.I realize there are hacks around this (pair the Sub with a Sonos speaker then group the speaker/Sub with the Port, eg.) but I do not want to do this.   If any of this is factually wrong, please educate me.

Bonjour,je souhaite utiliser mes enceintes dynaudio xeo3, connectées par un boitier avec Line in, pour écouter Deezer via mon téléphone iphone et mon mac.j’ai l’intention d’acheter un connect G2, d’occasion. Pas un “amp” ni un “port”. Pourriez-vous m’indiquer si ce système fonctionnera avec la nouvelle application sonos ? Si oui, quel branchement dois-je faire pour que ça marche ?Je vous remercie. daniel

Hi there! I am about to own a turnable and was wondering if i can have a fully analog path from turnable to sonos play 5 speaker?I found some forum posts about this issue but i think was other users telling their opinion and couldn’t manage to figure out how signal path works. I would like some sonos official answer about this! Some users in this forum claim that once the analog signal from line-in reaches play-5 speaker whether or not this speaker sends data to other speakers the a/d conversion is the only path through.So does every signal from line in is converted in digital and then optionally sent to other sonos devices and each device makes the d/a final conversion? If so, is there any way to bypass the the a/d part of the a/d/a process?If not what do i need to do to have a fully analog path? Thanks a lot!!

Hi, I have a Sony WH-1000xm4 headphone.   Can I connect this to my Sonos Arc soundbar ?

I’m looking to add an in wall subwoofer to my sonos home theater system. Currently I have an arc center channel and then 2 sets of architectural in wall speakers running to 2 separate amps for front/back, left/right. I would like to run two subs, one to each amp. Any recommendations on in wall subs to use? As well, what connections work best to get the most sound?

Hi, I was wondering what the best way would be to achieve this goal, I want to play my vinyl through the house, including my Tannoy speakers, I also want to stream from my nas to all speakers including my Tannoy speakers. The turntable has a pre amp and rca connections, the amp has no digital connections but does have a line in and line outThanksPhil 

Hey guys i have a sonos zp80 and a wd 100 can anyone tell me how to pair it to sonos s1 or my sonos zp80

My Port is up and running and sounds fantastic. But I have a question. When I’m playing a vinyl, cassette or cd through Port I always have to group the rooms (TV Room) when I have to flip the vinyl or change to the cassette or CD player. In other words I have to go to my app and group my Port (TV Room2) to my TV Room/Garage/Bedroom/Move in order to here the music playing. It’s a little annoying I have to go to the app and group the Port every time. Is this normal?

Hi If I make use of the Upgarde Programme to trade in my 2 * ZonePlayer 100’s and get my 30% discount on 2 repalcement units (via Sonos website), do I get to keep my ZP100’s and will they still work? Cheers

I plugged my Teac TN-300 into the Sonos Five and all I get is a faint highly distorted sound. Here’s what I’ve tried so far:Toggle the pre-am switch on the TT on and off multiple times to make sure it’s not a sticky switch. Changed the cable connecting the TT to the Sonos Five Tried multiple settings on the Line level (from 1 to 10) Kept autoplay off Made sure I am only playing on the Sonos Five and not on any other speakers in the home Disconnected and reconnected the cartridge head Reset my cartridge weight and anti-skatingAny other ideas? Is it possible the Sonos Five is fine except for a bad Line In?

hi, i have the in wall and the amp ready to go.  when i go to the app to add the architectural setup it cant find my system.  the amp is linked but do the speakers need to be linked.  i have an arc hdmi’ed arc’ed to my projector and appletv to my projector.   what do i need to do to add the arch in wall to my arc please? 

Hi I am the owner of 3 Play 5 gen 1 and a Playbar - i connect them to my bridge which are connected to my network switch.But my bridge is now dead - not power in it - and I can't get my Play 5 to connect or work - so I guess it is because i need to bridge to connect?I looks like i can't buy the Bridge anymore.Is there anyone who can help with a good advise - should it work without the Bridge og what to do ?

I want to get 2 different components (turntable and CD player) to access the Line In input on my Connect:Amp. Is there a way to do this without having to plug and unplug each time I want to switch between components?

Hi!I just bought a Sonos Port, to diffuse my old vinyls all around my house, on my sonos speakers. Usualy I use my turntable (thorens td60) on my amp (marantz 2270) with wired speakers.  My question : Do I absolutely need a preamp for connecting my turntable to the port , or I can pass thru my actual amp ? If so, how do I get out from my amp to the port ? I’m leaving a picture of behind my amp so you guys can help me . thanks !!     

App: Sonos 2 on Andriod Line in: Play 5 (gen 2) I have play 5 gen 2 as part of cinema setting paired with another play 5, playbar, and a sub. I can’t see a Line In option in the Source menu on the app either when having the line-lin cable plugged in. The other end is plugged into my desktop PC.   Anyone else is experiencing this issue?  

I like opera.  How can I watch it online through my pc and listen through Sonos?  When I have tried it using the line connction the timelag is painfully long.  Thank you for any advice.....

I’d like to be able to play the line in source of the port through the speakers that are connected to it. I’ve only been able to do it by going through the network, which introduces a lot of latency. Am I missing something?

In my account I have clicked upgrade and my two Play 1 have now gone out of my system how do i get the upgrade switched off and the two Play 1 back into my system 

So I have my Play5 sat high on a shefl to fill the room. I have my new Pro-ject Turntable on my bar. They’re several meters apart with no obvious cable run so how can I connect without having to use the Line-in cable option? Any Line-out convertors that work with the Sonos App?

what is the high and low temp for use of the sonos connect - I have it set up in the garage and wanted to keep it safe

My line-in connection on my Play 5 is not working. I’ve tried everything from making sure cables are secure, different sources, different levels, etc and still no sound at all from the line-in connection.

Bonjour, Mon salon possede 4 arrivées d’enceintes dans les coins de mur (en hauteur ≈ environ 2m50 de haut).Est il possible d’alimenter les 4 enceintes passives avec le système sonos amp (Mes enceintes font 50w/8ohms)  sans risquer bien sur, d’abimer l’ampli ?  

Hi - I have a setup with turntable and cd player feeding into a preamp, then separate amp to bookshelf speakers.  How do I integrate this with my existing Sonos stuff so that:I can play the turntable or the cd player through both the passive bookshelf speakers and the wireless sonos speakers, and  I can use the app for streaming to the passive bookshelf speakersIs it as simple as inserting a Port between the preamp and amp (that seems to easy)?thanks for any feedback!*** this is a basically a duplicate of a post I made in ‘components’ (I’m new to this, sorry) ***

Hi there, can anyone help me?I want to know if  I connect a  new Sonos turntable to my system, will it work through all my existing speakers, these include 2 x Sonos Ones, a few Play 1s, a Play 5 and a PlayBar .  Basically can I just simply add it to what I have got?Thanks!Mike