Were your headphones using a wireless link when connecting through PORT?

Good thought but I don’t have a problem with my wireless headphones with Sonos  other than were not sound quality looking for so switched to wired headphones which much better. The wired headphones are so transparent and revealing that I can hear detail in songs I’ve know since a child that never heard before. They need a matching amp and source and that for me and these headphones  isn’t  Sonos so I agree with Sonos. 

There is nothing intrinsically wrong with wireless links, however, many of them are not appropriate for the audio quality you are seeking.

Personally never found a wireless headphone/earbuds that sound as good or as comfortably as the reasonably priced wired earbuds I used until they were discontinued after the removal of phone headphone inputs.   Sure losing the wires is good but for menot worth loss is sound quality and inconvenience of having to charge another device. Ok when on the move with background noise. It was how the quest started. 

Glad I found this thread.

Currently I have a modest system compromosing of NAD C 316BEE amp and Q Acoustic 3030i speakers with a Topping D30 DAC. Love the relationship between all three components.

Today I bought a Audiolab 6000A Play due to glowing reviews, in an attempt to get a ‘one box solution’. Dear lord! It is so bad! Not sure if the Audiolab didn’t like the Q Acoustic speakers but they sounded terrible - not to mention the god awful Play-Fi app. It is boxed back up and is going back to the supplier tomorrow.

So here I am again. I just want a good streamer that can connect to all my subscription services like Amazon Music, Local Plex, Soundcloud etc. I know the Sonos is perfect for that as I have a Sonos One in the kitchen and the app is just amaingly good!! If only I could implement this with the NAD in my front room.

Am I correct by saying even if I was to buy the Sonos Port and connect it to my Topping D30 DAC its not going to sound too good?

I’m just wondering if I already have the best solution out there. USB connection from my server to my DAC. Foobar on the server with the Android remote control app. Its just a PIA to VNC into my server to change from Foobar to Amazon Music and Soundcloud. Who would of thought in 2021 this would even be a problem.

If the Port is to be used in Fixed Volume mode then all the criticisms of the digital out’s DSP are moot. There’s no DSP in Fixed. (Equally the analog out is perfectly fine in Variable Volume mode, but one can understand why you’d want to use the Topping: sunk cost.)

Buy a Port from Sonos. Try it.  You have 100 days to return it if you don’t like it. Simple. 

There is more than the sunk cost fallacy for the Topping - there is the electricity it consumes. And the footprint and additional cable clutter. 

Went to Sevenoaks today. Walked out with the Bluesound Node. Very happy indeed. Apart from no SoundCloud support I am very happy. For a little more money the Node offers much more than the Port.

One third more money, but if you’ve no desire to integrate with the Sonos world then Bluesound may suit. Hopefully the software is better these days. Just steer clear of the MQA stuff.

I would of loved to integrate with the Sonos Eco-system more but......I was sold on the Bluesound. HDMI, Bluetooth, Optical to name a few features which is well worth a third more IMO, YMMV of course.

I can't fault the BlueOS yet. So happy I can add my own radio stations via custom links. I couldn't find a definitive answer online but I'm happy to say you can.

I'll always love you Sonos but this time you were outdone by the competition.

That's okay. You're still contributing to Sonos revenues indirectly, in the form of royalties. 

I wonder how the Bluesound will hold up over time, both in hardware lifetime and in software support. 2006 era Sonos gear (minus the CRs) is still usable.

All this is useful if the wireless in sync grouped play mode is stable and does not suffer stuttering and drops as Bluesound is sometimes said to suffer from. Of course if this is not your use case, it does not matter.

I think you’re slightly misunderstanding. When we’re asking for a good digital output it is so that we can use it with a DAC, Jitter is about the static that the DAC is becoming connected to which then gets amplified and passed on through the amplification process. (It can be treated within the DAC But its better to prevent a problem than to remedy it after the fact). It’s also about being able to pass a good digital signal to the DAC regardless of the electrical noise that might come with it. Lastly it’s about having multiple options. I don’t have a Sonos streamer but my DAC has optical and usb inputs, so even if they made a streamer i wanted, it wouldn’t be compatible without those outputs. 

I want this so much. I use a one so in my bedroom and have a separates hifi in my living room built from Chord, Cyrus, PMC and MK components. I love both, my separates system is vastly superior though (but not for convenience). I want to buy a streamer, currently it would probably be a blue sound node I most want but Ideally it would be a sonos product. I want it to work on the same app as. My sonos speaker and would probably already have a sonos port if it’s outputs weren’t point defeatingly poor and an outright £400 sonic downgrade. People already buy the port though, they do so to use with hi fi systems they clearly love enough to buy a £400 accessory for, so Sonos already has enthusiast and audiophile customers, however I personally (and I know other people who feel the same) feel like I’m only willing to pay the high price for the convenience of a Sonos port if it sounds as least as good as not having one. It shouldn’t be a big ask. I also wanna say I don’t mean to bash on SONOS right now. I like them and their products, but there is a product they don’t make that I want badly, it’s an attainable and exciting possibility I’m discussing here, not a complaint. 

Completely disagree with the idea that any one who’s purchased a Port is in the  ‘enthusiast and audiophile’ bucket.  As you pointed out, if you already have an existing system that you like, then a Port is a good option, but you didn’t mention the cost difference between keeping your system and replacing it with Sonos home theatre setup.   As an example, I used to have a basic 5.1 setup with in wall speakers that I had a Connect (Port’s predecssor) connected to.  I did not want to spend over a thousand to replace that just to get the system part of Sonos, so the Port made a lot more sense.  It does not mean I’m an audiophile.

Likewise, if you want use a 3rd party multiroom amp instead of several Sonos amp, then you’ll want to use a Port.    If you have a turntable or some other component you want play in your Sonos system, but don’t need a Five or Amp, the Port is the way to go.

You’re correct that the convenience of the Port is a big plus, but it’s really about the convenience of the whole multiroom system and the Port is often a useful component of that system….even if doesn’t read the audiophile standards of a segment of the market.

Wyred 4 Sound.  ROFL.  They recently formed a company to license the legendary Bob Carver name, then produced this overpriced piece of garbage:

https://www.audiosciencereview.com/forum/index.php?threads/carver-crimson-275-review-tube-amp.29971/

Most “audiophiles” are utterly clueless.  Thankfully, Amir is changing that by measuring this crap.

You think?! You cannot change what does not want to be changed.

Manufacturers are being forced to take Amir seriously.  His site now has 2.8X the traffic of Stereophile (with its nonsensical “reviews” pushing over-priced garbage), with more engagement.  

Hiya, you make a lot of good points here, but I’m not saying that anybody who has bought a port is an audiophile, but lots of people who have, are. I’m saying that to invest £400 into an existing system suggests a level of love for old school hifi, for people who love their amplifiers enough to not buy a Sonos amp but rather keep their old one and buy the port dispite the price difference not being too drastic. But we live in a world now with high res music streaming from Apple Music, tidal, Amazon and soon to be Spotify for no extra money. Sonos are a great company who make great things but are being fast outdated (in this respect) and I think that for £400 a far better streamer could be sold to us, or for a bit more too. By this I mean that if it costs £400 for a streaming module then it should be a better streaming module than they put into speakers that you could buy between 2-3 of for the same price. A decent power supply that doesn’t produce so much electrical noise and a couple more digital outputs aren’t a lot to ask. High res shouldn’t be either but I understand that’s relatively recent and slightly more complicated to fit into an entire ecosystem. 

Could you give us a analysis result which shows the power supply on the Port puts out “so much electrical noise” along with an ABX test which shows that “so much electrical noise” is audible to the listener?

Thanks!

Again, you are wrong here.  Your assumption that people are choosing between an existing 2.0 stereo receiver/amo  + Port  or the Sonos amp is not correct.  There are some, sure, and that cost difference is minimal.  However, I would argue that the majority are looking at replacing a 5.1, 7.1, etc home theatre setup or multiroom audio system  rather than a ‘simple’ 2.0 stereo.   To replace a 5.1 setup, I would need an amp  + 2 Ones at a minimum, (keeping exiting front speakers and sub) well over the cost of a single port.  And obviously, you would need at least two amps to replace a multiroom audio system.  That’s not considering those who only want an aux input into the Sonos system for a turntable, CD player, etc.

It seems like you are looking at the Port more as a stand alone streaming device rather than part of a multiroom audio system.  I would agree that if all you want is a streaming box, whether you’re an audiophile or not, there are probably more logical choices out there.  But the Port isn’t just a streaming box, and those other options are not going to play in sync with other Sonos speakers or wirelessly send aux audio to Sonos speakers.

The current from the power supply is what’s moving the magnets in the woofers and tweeters that creates the sound you hear. The first commercial DACs built into CD players had tons of issues, such as voltage changes based on how many bits were 0s and how many were 1s. They’d output a significant difference between 01111111 and 10000000, when that should be the smallest difference possible. It doesn’t take “golden ears” to hear the difference between a mass market 1980’s CD player and a high quality one from 2022. It also doesn’t “golden ears” to hear the difference between components with cheap switching power supplies and ones with good power supplies.

Sonos power supplies aren’t crap, but to simply dismiss the impact of the electrical engineering that goes into making different audio components as inaudible because they’re “digital” is as foolhardy as the claims of any audiophool.

Sorry to pick on you. You’re post is just at the end of a frustrating thread in which I’m trying to find some answers as to why my 2-ch system w/ a Sonos Connect into a Pro-ject Pre Box S2 into a Bryson 4B sounded so much better before I replaced all that with an Amp so I could use the 2-channels as rear speakers with an Arc and Sub. Even when I set the surrounds to max for music playback, the music just isn’t as enjoyable as it was before. Probably has more to do with impedance matching with the speakers (B+Ws) than anything else.  

If you want any constructive help here you will have to clarify exactly the signal chain via which the sound in the past, being compared against, was delivered as compared to the signal chain via which it is being delivered now.