Skip to main content
Contributor I
September 14, 2022
Answered

Connecting Amazon Echo Show 8 to Sonos 5

  • September 14, 2022
  • 5 replies
  • 1395 views

Recently purchase the Echo Show 8 and a new Sonos 5; what is the best way to connect the two and if it is by micro USB and 3.5mmmm jack, where did you get a long cable from?  I’m based in Australia

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Best answer by Not An Opossum

You should be able to connect the show 8 by 3.5mm jack, as long as your show 8 has the 3.5mm jack. I don’t believe there’s a way to connect via micro usb. 
 

From the internet:

  1. Connect a 3.5-mm audio cable to the line-out port on the Echo.
  2. Connect the other end of the audio cable to the line-in port on your Sonos. For a Play:5/Five, the cord should have single 3.5-mm connectors on both ends.
  3. Open your Sonos app to enable Line In Autoplay under Room Settings.

5 replies

September 14, 2022

The latest Echo Show 8 does not have the necessary audio out jack needed for it to connect to any Sonos input jacks.

Look for the older Show 8 or 5 that has this jack.

Not An Opossum
Enthusiast I
September 14, 2022

You don’t need to connect them by wire. You would use the echo show to wirelessly play music from, or issue commands to your five, once you set it up in the Alexa app. The echo should discover your five, and there’s also a Sonos skill. Not sure if the Sonos skill is even necessary now.  

- Not an opossum
cshermerAuthor
Contributor I
September 14, 2022

but i should be able to connect the echo 8 and Sonos 5 via micro USB and 3.5mm jack, correct?

 

September 14, 2022

Only via 3.5mm, if you can find a socket at the rear of the Echo.

Not An Opossum
Enthusiast I
September 14, 2022

You should be able to connect the show 8 by 3.5mm jack, as long as your show 8 has the 3.5mm jack. I don’t believe there’s a way to connect via micro usb. 
 

From the internet:

  1. Connect a 3.5-mm audio cable to the line-out port on the Echo.
  2. Connect the other end of the audio cable to the line-in port on your Sonos. For a Play:5/Five, the cord should have single 3.5-mm connectors on both ends.
  3. Open your Sonos app to enable Line In Autoplay under Room Settings.
- Not an opossum