Skip to main content
Contributor I
Dec 17, 2022 6:45 AM UTC
Answered

using External amp with Port

Can I plug turntable and Cd player into external amp and then external amp into Sonos Port audio-in ?
Thanks

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Jai67Answer
Trending Lyricist I
Dec 19, 2022 2:13 AM UTC

The output from the Amplifier/Receiver would have to be plugged in to the Line In of the Port.

My receiver/amplifier has  Zone 2 output rca jacks that can be used to send the signal via wire e.g to another room where it would feed another amplifier. I use the Zone 2 output to feed the Port Input instead. This way, I can stream anything from my amplifier/receiver by selecting the switches on the amp, e.g. phono, CD, tuner. The Port will stream anything selected. For me I’m streaming to a Sonos Move. There is no need to plug or unplug anything, just use the switches on the Receiver. 

Jai

 

9 replies

Airgetlam
Dec 17, 2022 8:09 AM UTC

You don’t want to send an amplified output to a port, you’d be better off feeding it a line level output from the amplifier, such as a tape out. 
 

You’re intending to use this amplifier as a switch for what you’re feeding to Sonos? Note that any speakers connected to this amplifier will be slightly ahead of any Sonos speakers. 

Translate
Bruce
Chrisc368Author
Contributor I
Dec 18, 2022 5:56 AM UTC

Hi there, thanks for the response. Still a little confused, do i connect Turntable and CD player to external amp and then a line from the amp to audio out on the Port to be able to play as a switch through Sonos ?

Translate
Lead Maestro
Dec 18, 2022 6:06 AM UTC

Leave the external amp out of the setup and just use an RCA switch like this:

https://a.co/d/9WXuKqO

Translate
"Receive with simplicity everything that happens to you." - Rashi
Airgetlam
Dec 18, 2022 8:20 AM UTC

Certainly easier to do as @GuitarSuperstar suggests, but if you feel you must use the Amp, consider the Sonos Port to be essentially the same as a tape player. Connect it in the same manner, using tape in and tape out. The FAQ for the Port is here. 

Translate
Bruce
Jai67Answer
Trending Lyricist I
Dec 19, 2022 2:13 AM UTC

The output from the Amplifier/Receiver would have to be plugged in to the Line In of the Port.

My receiver/amplifier has  Zone 2 output rca jacks that can be used to send the signal via wire e.g to another room where it would feed another amplifier. I use the Zone 2 output to feed the Port Input instead. This way, I can stream anything from my amplifier/receiver by selecting the switches on the amp, e.g. phono, CD, tuner. The Port will stream anything selected. For me I’m streaming to a Sonos Move. There is no need to plug or unplug anything, just use the switches on the Receiver. 

Jai

 

Translate
Chrisc368Author
Contributor I
Dec 19, 2022 5:11 AM UTC

Cheers Jai, this is what I am currently doing, I just have to get the balance right as it is a bit distorted

Translate
Contributor I
Jan 2, 2024 8:18 AM UTC

The output from the Amplifier/Receiver would have to be plugged in to the Line In of the Port.

My receiver/amplifier has  Zone 2 output rca jacks that can be used to send the signal via wire e.g to another room where it would feed another amplifier. I use the Zone 2 output to feed the Port Input instead. This way, I can stream anything from my amplifier/receiver by selecting the switches on the amp, e.g. phono, CD, tuner. The Port will stream anything selected. For me I’m streaming to a Sonos Move. There is no need to plug or unplug anything, just use the switches on the Receiver. 

Jai

 

@Jai67: are you experiencing any lag between the speakers connected directly to the Receiver and the sonos speakers, when you run both zones at the same time? I have a whole bunch (like 10) of Sonos speakers all over the house and would like to run my home theatre speakers (zone 1) with all Sonos speakers (on Zone 2 through the Port, which I am considering buying) - and create a whole home audio arrangement. However, if there is a lag on the sonos speakers, it won’t work.

Translate
106rallye
Jan 2, 2024 12:15 PM UTC

There's always a 75ms delay when using the analogue input on Sonos. The only way to prevent this would be putting the Port between CD-player and receiver. Since the “out” of the Port is synced with the rest of the Sonos devices you probably would not have a delay.

Translate
Contributor I
Jan 2, 2024 3:40 PM UTC

Thanks @106rallye.

Translate