Combined kitchen/living room plan
Hi all - we’re doing a renovation and have an open combined kitchen/living room (roughly 600 square feet). We’re planning on putting in ceiling speakers but are unsure about the configuration (4 in living room, 2 in kitchen?) and how they would be wired to a Sonos receiver in a closet. Would all 6 go the same receiver? Are there options to only have 4 living room on at once? And if we add a TV to the set up is there a way to connect the TV to the ceiling speakers wirelessly through the Sonos receiver? Other options if the TV and receiver are in different parts of the room? Thanks!
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Page 2 / 2
Thanks you very much for the clarity!
Hi all - this set up has been working well for music though one issue we’re having is that there is choppy audio coming from the ceiling speakers that are connected to the Connect:amp, which is connected wirelessly to the network and grouped with the Beam. This only happens when watching TV and the audio from the Beam itself seems to be fine. Also, there are no issues with the system when streaming music. Anyone know of any remedies for this problem?
Userlevel 7
Hi maki
You have several options...
Since you say that when playing music everything is fine when using the ceiling speakers; then I'd say there is no need to check the wiring, however you might do so just to be sure.
Try these steps one at a time
1. Wire the Beam to your router if possible
2. Wire the Connect: Amp to the router if possible
3. Wire both the Beam and Connect:Amp to the router if possible
If none of the above resolve your issue then I suggest you submit a diagnostic to Sonos and post the Reference ID in this forum.
Cheers!
You have several options...
Since you say that when playing music everything is fine when using the ceiling speakers; then I'd say there is no need to check the wiring, however you might do so just to be sure.
Try these steps one at a time
1. Wire the Beam to your router if possible
2. Wire the Connect: Amp to the router if possible
3. Wire both the Beam and Connect:Amp to the router if possible
If none of the above resolve your issue then I suggest you submit a diagnostic to Sonos and post the Reference ID in this forum.
Cheers!
Page 2 / 2
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.