Skip to main content
Contributor III
Oct 5, 2021 1:35 PM UTC
Answered

s1/s2?

Hi, just wanting to check as I’m considering a Beam which needs S2 . All my components are on the S1 app at present.

I have only got a bridge that’s not compatible with S2 - The rest (connect,play5 2nd gen and play 1) are.

The bridge is used solely to get the play 5 working in a remote room.

I think I’m right in saying I could have the bridge on S1, and the rest on S2?

My concern is that the Sonos mesh between the bridge and any other components won’t be affected by being on different apps? i.e. the play5 will still work by being close to the Bridge (which is hard wired via cat cabling to the router)

Or should I change to a boost??

Thanks

John      

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
ratty
rattyAnswer
Oct 5, 2021 2:38 PM UTC

My intention is to have the bridge on S1, but everything else on S2

Not possible. A system is either all S1 or all S2. A Bridge running S1 can’t be part of an S2 system. If it’s not part of the system it can’t function as a bridge. 

Either replace it with a Boost, or you may find your system works okay without any wired component at all, i.e. connecting to your router’s own WiFi in “wireless” mode.

11 replies

Contributor III
Oct 7, 2021 11:24 AM UTC

Sorry, I meant the secondary Ethernet port on the Bridge being used to daisy-chain, which could be replicated on the Boost.

I won’t be connecting anything to the Play5.

 

Thanks again

Translate