Skip to main content
Contributor I
Nov 24, 2023 12:30 AM UTC

How to setup a house with existing ceiling speakers

Hi, we have recently moved into a property that has veiling speakers throughout the house (they seem to be in nearly every room!) and external one also. All are hardwired in and areas where it’s designated for a TV seem to have amplifiers and there is 3 boxes wired up in the mechanical room that I believe are related to the speaker system.

I’ve not even tried to get anything working with the gear that is there currently. I’d like to get this working with sonos but have no idea what would be needed and how I’d go about it.

I’d like some advise on what Sonos products I’d need and then how I’d go about getting this working.

Thank you! 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

11 replies

buzz
Grand Maestro
Nov 24, 2023 1:15 PM UTC

We need more information about your system. Give the model numbers of those boxes in the mechanical room.

Translate
nevmacAuthor
Contributor I
Nov 24, 2023 2:50 PM UTC

Hi, I assumed the equipment that was left there would be removed and I’d start again with Sonos. Is that not the case? Complete beginner here so I do apologies if I’m not understanding the basics. Thanks 

Translate
controlav
Lead Maestro
Nov 24, 2023 3:00 PM UTC

If re-using the existing amplifiers: Sonos Port or Connect Gen 2.

If not, Sonos Amp or Connect:Amp Gen 2.

Translate
Author of the leading independent Sonos apps for Android, MacOS, iOS, Windows and Xbox.
nevmacAuthor
Contributor I
Nov 24, 2023 3:51 PM UTC

Hi. So if we just have the speakers and their wires, you’d recommend I have a Sonos Amp in the mechanical room? Will this connect to all the speakers and segregate them so I can choose where to play the music rather than all the house at once? Is that all I would need? thanks

Translate
buzz
Grand Maestro
Nov 25, 2023 3:49 AM UTC

A single AMP will play all the speakers and you will not be able to control individual rooms. Those boxes might allow individual control. What are the model numbers of those boxes?

Translate
nevmacAuthor
Contributor I
Nov 27, 2023 4:53 AM UTC

These are the 3 boxes in the mechanical room. Thanks 

Translate
Stanley_4
Grand Maestro
Nov 28, 2023 5:42 AM UTC

Any data plates or more information on the back or bottom of the speaker selectors?

Translate
buzz
Grand Maestro
Nov 28, 2023 8:26 AM UTC

The bottom unit is an amplifier and the top two units are speaker selectors with one ON/OFF button per pair of speakers. All speakers will play the same music and there is no individual Volume control for each room. You may have wall mounted Volume controls in each room. Elsewhere is some equipment that selects which music to play in all of the rooms and may be able to adjust overall Volume.

You mention other equipment associated with TV’s. We need information on this too.

There may be a remote control system.

For the equipment shown so far, a SONOS AMP is not appropriate. Do you currently have any SONOS equipment?

I recommend hiring a Pro to sort this for you.

Translate
nevmacAuthor
Contributor I
Nov 28, 2023 11:19 PM UTC

hi all, thank you for your help.

I cannot see any data plates but it is difficult to move them as they are at height.

I don’t own any SONOS, I was told by a friend that it’s what they use so thought to explore.

It would be good to simply test the speakers and system that is currently here. Any ideas how I’d do that?

Translate
Stanley_4
Grand Maestro
Nov 29, 2023 12:20 AM UTC

Anything with an audio output should work, even if it is just a headphone jack.

Get a cable to go from your device to the amplifier and see how things go.

Your Sonos solution may be as simple as adding a Port to the existing gear.

Translate