Skip to main content
Contributor I
Aug 4, 2021 6:01 PM UTC
Answered

Connecting Sonos Arc Soundbar to Projector

Hi all -

I’ve done a lot of research and read many articles, but still trying to figure out the best way to set up my home theatre surround sound.  I purchased a LG HU810PW Cinebeam projector and will be displaying that on a 110 inch Aeon Elite Screen.

I’m thinking of purchasing the following hardware for the surround sound:

  • Sonos Arc Soundbar
  • Sonos Subwoofer
  • 2 Sonos SL speakers

Additionally - I don’t have cable or Direct TV.  We have amazon firestick that I think I would just plug into the projector itself once I set all this up?

Went to an electronic store and they said all those speakers should jsut be able to connect to projector via Bluetooth.  Is this accurate?  Want to make sure based on conflicting articles I’m reading before I purchase all of this stuff.

-Dhrumil

 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Airgetlam
AirgetlamAnswer
Aug 5, 2021 12:04 AM UTC

Yes, and no.

:)

Yes, you can connect the Arc to the projector with an eARC connection, using a HDMI 2.1 cable. I don’t recall ever seeing a projector with an eARC output, that’s spectacular.

The SUB connects (we use the term “bonds”) to the Arc using a “hidden” wifi channel at 5Ghz, and not bluetooth, but it is wireless. Just be sure not to turn off the “wireless radio” on either the Arc or the SUB.

And the same for the two surround speakers (the Sonos One SLs), they also connect to the Arc using that “hidden” 5Ghz channel, not bluetooth. 

Do away with the whole “bluetooth” thought in your mind, and you’ll be fine. :)

Bruce

20 replies

Airgetlam
Aug 4, 2021 6:21 PM UTC

No, the Arc does not have a bluetooth connection, nor, to my knowledge, can a bluetooth connection carry a Dolby Digital 5.1 signal. So I’d be very cautious about believing anything that sales person said. 

You’d need one of two things to get audio from that firestick to the Sonos Arc. If you’re just interested in Dolby Digital, and not Atmos, then a normal HDMI switch that has an optical output would work. It could take the audio and split it out to the optical output, and then you’d connect that to the optical to HDMI-ARC connector that came with the Arc, and you’d be fine with Dolby Digital (not DTS, not Dolby Digital plus, etc)

On the other hand, if you’re trying to pass some sort of Atmos signal to the Arc, you’d need something like an HD Fury Arcana (there may be other manufacturers of this type of device, but I don’t know them) that can split the Atmos signal from an HDMI input, and send it out via HDMI-ARC to the Sonos Arc.

Translate
Bruce
Airgetlam
Aug 4, 2021 6:23 PM UTC

Oh, one more thing to note. In general, projectors are not placed very close to where the speakers are, so you’re going to need some (inconvenient) long cables to connect the speakers to your projector. In either use case above. 

Translate
Bruce
melvimbe
Aug 4, 2021 6:23 PM UTC

No, with the exception of Roam, Sonos products don’t have bluetooth.  (As well, I don’t think your your firetv or project would send surround sound audio over bluetooth)  You need to use an HDMI-ARC connection with the Sonos Arc, and I doubt your projector is capable.  Perhaps the best solution is an HD Fury Arcana

 

edit:  Dangit Bruce!

Translate
Danny
Airgetlam
Aug 4, 2021 6:25 PM UTC

Roam and Move, but neither are terribly appropriate for home theater use. And neither will connect with a Sonos Arc in any way other than “grouping” while on Wifi. Certainly not when on Bluetooth. 

Translate
Bruce
dhrumils3Author
Contributor I
Aug 5, 2021 12:00 AM UTC

Thanks Bruce and Danny for the info.  Very helpful.  So the projector I have does have a eArc HDMI slot.  And since the Sonos Arc does have an eArc input, can I connect the projector via a HDMI 2.1 cable from projector to sound bar?

then - if that works, can the sound bar can connect to Sonos subwoofer via Bluetooth I believe?  
 

last - If I have 2 other Sonos SL speakers, they would just connect via Bluetooth as well?

 

I guess my main question is can you wire audio with just the sound bar and have the rest of the Sonos equipment connect via Bluetooth?

 

Thanks!! 

Translate
dhrumils3Author
Contributor I
Aug 5, 2021 12:02 AM UTC

Here is the back of the projector just as a FYI

Translate
Airgetlam
AirgetlamAnswer
Aug 5, 2021 12:04 AM UTC

Yes, and no.

:)

Yes, you can connect the Arc to the projector with an eARC connection, using a HDMI 2.1 cable. I don’t recall ever seeing a projector with an eARC output, that’s spectacular.

The SUB connects (we use the term “bonds”) to the Arc using a “hidden” wifi channel at 5Ghz, and not bluetooth, but it is wireless. Just be sure not to turn off the “wireless radio” on either the Arc or the SUB.

And the same for the two surround speakers (the Sonos One SLs), they also connect to the Arc using that “hidden” 5Ghz channel, not bluetooth. 

Do away with the whole “bluetooth” thought in your mind, and you’ll be fine. :)

Translate
Bruce
Airgetlam
Aug 5, 2021 12:07 AM UTC

I was typing while you posted that picture. That’s awesome that it really does have eARC output. 

 

I should have looked up the manual from your first post, just to look at it .

Translate
Bruce
dhrumils3Author
Contributor I
Aug 5, 2021 12:18 AM UTC

Got it thanks - my bad I’m a rookie at this and we’re getting our basement finished as we speak.  So wanted to make sure I get the correct hardware and wires, etc.  trying to do this on my own vs paying a ton to have an installation company to do it.  
 

So “WiFi” will help connect to the Sub and SL speakers, NOT Bluetooth!  
 

actually one last question… my modem / router is NOT in this theatre room.  So I read if the WiFi signal isn’t strong you may want to get the Sonos bridge to boost the WiFi signal between the soundbar/ sub / speakers… does that sound right?

Translate
Airgetlam
Aug 5, 2021 12:25 AM UTC

Meh. Kind of...

What the BOOST does is, when wired to the router, create its own network signal that the other Sonos devices would connect to, rather than your normal wifi signal.

I’d try it initially without one, it’s unlikely that the Arc won’t be able to connect to your normal wifi (although it will need a 2.4Ghz b/g/n channel)  If it doesn’t connect to your normal wifi, we can go down that road later. 

Translate
Bruce