I am curious if there is an easy way to use a Sonos Play 3 speaker as an external wired speaker to an older audio device, with no app or networking required….just a simple external speaker? Thanks.
Answered
Using a Sonos Play 3
Best answer by Stanley_4
Sure, I use my old Play 5 Gen 1 speakers just that way since Sonos bricked the electronics during the early upgrade program.
Open the Play 3 up, remove all the electronics. Add a crossover and speaker connectors to the case. Seal it back up.
First hit, something far smaller would work better for your Play 3:
https://www.amazon.com/gp/product/B016FBNNCY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/Terminal-Binding-Amplifier-Insulated-Connector/dp/B0D4TBVPCB/ref=sr_1_1_sspa
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Sure, I use my old Play 5 Gen 1 speakers just that way since Sonos bricked the electronics during the early upgrade program.
Open the Play 3 up, remove all the electronics. Add a crossover and speaker connectors to the case. Seal it back up.
First hit, something far smaller would work better for your Play 3:
https://www.amazon.com/gp/product/B016FBNNCY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/Terminal-Binding-Amplifier-Insulated-Connector/dp/B0D4TBVPCB/ref=sr_1_1_sspa
Stanley_4, thank you so much. I thought about opening up the Play 3, but would not have known what to do next. Is the installation of the crossover and connectors intuitive? In other words, will it be obvious where/how to install? My AV tech experience is extremely limited. Thanks again for the advice.
The Play 5 was pretty easy to figure out, the crossover is marked for woofer and tweeter so the only thing to watch is getting the plus and minus terminals matched.
Not great but it should give you an idea on the innards.
Got it, Stanley_4. Thanks again. Your info very helpful. I was able to remove all the innards and connect speaker wires to the speakers, running them out through the power hole in the back. I now have a useable speaker for my old turntable, and the sound is quite nice.
Glad it worked for you, I’m really happy with my gutted and repurposed Play 5s too.
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.