Skip to main content
Alonzo Mosley
Headliner I
Jan 15, 2023 3:29 AM UTC
Answered

Speakers Drop

Four Sonos Ones, two Sonos Threes. One Connect and One Boost. The Three are a pair. One of the Threes is hardwired into the router, as is the Boost. The other Three and the Connect are eight feet from the router, unobstructed line of sight.

1300 square foot, single-level apartment. Drywall walls.

New (Sept 2022) router.

I cannot accept “network interference” as a reason why speakers drop and come back in sporadically.

Yes I have rebooted the router, and at least weekly I unplug and replyg every speaker (which involves moving bookcases, which is nice).

Diagnostic 233812001 and 964518148.

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Alonzo Mosley
Headliner I
Feb 8, 2023 5:23 PM UTC

Nice to see that the Green Check - ‘This Has Been Answered’ Sticker Is on the Post Long Before This Has Been Answered

 

So… The one combination I never tried on my own:

  • Plug speaker in via ethernet
  • Change the Network channel
  • Reboot the system
  • Change the Network channel back
  • Unplug speaker
  • Reboot
  • Change the Network channel

Finally got through to Support, that’s what he had me do… And it’s working for now.  I feel like I had tried changing the channel whilst it was plugged in a few weeks ago, but apparently I didn’t do it twice.

So fingers crossed this issue is closed. But you know what they say, every time God closes a case, he opens a ticket…

 

Thanks everyone for your suggestions.

Dan: You're gonna need to get someone to fix my computer. Kim: What's wrong with it? Dan: It's in several pieces on my floor.

21 replies

Lead Maestro
Jan 15, 2023 4:18 AM UTC

Have you tried changing the SonosNet channel in the Sonos app?

Translate
"Receive with simplicity everything that happens to you." - Rashi
Alonzo Mosley
Headliner I
Jan 15, 2023 6:32 AM UTC

I have before; any suggestions on choosing/determining a “better” channel?

Translate
Dan: You're gonna need to get someone to fix my computer. Kim: What's wrong with it? Dan: It's in several pieces on my floor.
Stanley_4
Grand Maestro
Jan 16, 2023 1:53 AM UTC

Swap to each of the three clear channels, 1 - 6 - 11 and examine the network matrix on each.

If you have a WiFi monitor app it will help identify WiFi congestion on the channels but usually won’t show you non-WiFi signals like Sonos, microwaves or baby monitors.

If Sonos doesn’t see your post (this is a user forum with some staff visits) a call to Sonos Support would be good.

Translate
Corry P
Sonos Staff
Jan 19, 2023 11:04 AM UTC

Hi @Alonzo Mosley 

Thanks for your post!

How far apart are your router, your Boost, and the wired Play:3? If, as I suspect, they are all in the same area, I recommend you unplug and remove the Boost, and keep the router and Play:3 at least 1m apart - the wired speaker will perform the same task as the Boost, so there’s no need for both.

I hope this helps.

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein
Alonzo Mosley
Headliner I
Jan 19, 2023 5:43 PM UTC

The Boost is next to the router, on top of a cabinet, and the Play is on the floor next to the cabinet. So… maybe six feet. (That’s what, about 417 meters?)

When I first got the system and it acted up (same apartment) five years ago, everyone - here online, at the distributor - insisted the Boost was the answer to my problems. Now, for every person who says “You need the Boost,” there’s someone who says, “No need for both...”

Translate
Dan: You're gonna need to get someone to fix my computer. Kim: What's wrong with it? Dan: It's in several pieces on my floor.
buzz
Grand Maestro
Jan 19, 2023 7:23 PM UTC

Each situation is unique. In general, BOOST is used when you want to use SonosNet and you don’t need a player at the most practical location for connecting SonosNet. Any number of players can be wired. I always recommend wiring as many players as is practical.

Piling BOOST next to another WiFi device reduces BOOST’s effectiveness.

If you can wire a player, BOOST is most likely redundant. BOOST can also be used to service a poorly covered wireless area. This BOOST can be wired or wireless and should be placed approximately midway between good and poor coverage areas. BOOST is simply a player with the audio removed in order to reduce cost.

---

With respect to some users and dealers pushing BOOST’s on to everyone: At one point the competition was dumping on SONOS as being a liar about “wireless” because one unit needed to be wired. Never mind that SONOS worked much better than anything else. Other “wireless” products could support 3-4-5 units, but SonosNet could reliably support 32 units. At one point SONOS started including a free BRIDGE (BOOST’s predecessor). This did not stop the competition’s claim. Anyway it was a cheap trick for SONOS to enable WiFi connections and this instantly shut down the competition’s claim. 

It’s interesting to note that SONOS has been using wireless mesh since inception in 2005. It’s only recently that general consumer WiFi has started using mesh. Some dealers and users have not moved on from the “always include a BRIDGE/BOOST” mentality.

Back in 2005 WiFi was not as robust as it is now. Back then is was not practical to use home WiFi on the scale that SONOS needs. This is beginning to change and WiFi can support more units now, but SonosNet is more reliable for large systems.

 

Translate
Alonzo Mosley
Headliner I
Jan 19, 2023 7:28 PM UTC

Well since the whole point of dropping several large on Sonos was to get rid of wires, “wiring as many as possible” is not a viable option. If I wanted wires, I’d have my 12” Advents and Klipsch towers, still…!

I will try disconnecting the Boost and see if I find any improvement...

Translate
Dan: You're gonna need to get someone to fix my computer. Kim: What's wrong with it? Dan: It's in several pieces on my floor.
Ken_Griffiths
Jan 19, 2023 8:24 PM UTC

Well since the whole point of dropping several large on Sonos was to get rid of wires, “wiring as many as possible” is not a viable option. If I wanted wires, I’d have my 12” Advents and Klipsch towers, still…!

I will try disconnecting the Boost and see if I find any improvement...

It would be helpful to know what channels and channel-widths are you using on your router for its WiFi bands and also what channel you are using for SonosNet too?

Ensure that each of your wired/wireless network devices are away from each other by at least one metre (minimum) …and as you are not using any Sonos portable devices, it may help to remove any WiFi credentials (if present) showing in the Sonos App network settings (Settings/System/Network/Manage Networks). Those credentials are not required when running all on a SonosNet signal and will stop the opportunity for the devices hopping between SonosNet and your routers WiFi signal.

Its a good idea too to reserve all the Sonos devices IP addresses in the routers DHCP reservation table so that their address remains ‘fixed’ on the local network. 

Translate
Corry P
Sonos Staff
Jan 24, 2023 1:41 PM UTC

Hi @Alonzo Mosley 

The Boost is next to the router, on top of a cabinet

“Well, there’s your problem!” as some like to say.

and the Play is on the floor next to the cabinet. So… maybe six feet. (That’s what, about 417 meters?)

Uh, closer to 2 metres, actually (I can’t tell if you were serious). It’s far enough. On the floor isn’t ideal though - the closer a speaker is to the floor, the more furniture it probably has in the way of receiving/transmitting a signal. I recommend raising it to see if it helps. Ceramic floor tiles wouldn’t help much either, and water pipes could also cause problems.

When I first got the system and it acted up (same apartment) five years ago, everyone - here online, at the distributor - insisted the Boost was the answer to my problems. Now, for every person who says “You need the Boost,” there’s someone who says, “No need for both...”

A wired speaker will perform the same task as a Boost, so if you have one, there is likely no need for a Boost - especially in the same location. All I can say is some people know enough to give good advice, others know enough to give the best advice.

I hope this helps.

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein
Alonzo Mosley
Headliner I
Jan 26, 2023 10:26 PM UTC

Hi @Alonzo Mosley 

Thanks for your post!

How far apart are your router, your Boost, and the wired Play:3? If, as I suspect, they are all in the same area, I recommend you unplug and remove the Boost, and keep the router and Play:3 at least 1m apart - the wired speaker will perform the same task as the Boost, so there’s no need for both.

I hope this helps.

This is decidedly not the “best” answer...

Translate
Dan: You're gonna need to get someone to fix my computer. Kim: What's wrong with it? Dan: It's in several pieces on my floor.