Skip to main content
Contributor I
Jan 21, 2023 6:15 PM UTC
Answered

Sound Drop Outs

Hi Everyone. I’m hoping someone can help with an annoying issues with my music playback. 

I use Windows 11 pc and iTunes to play music to all my Sonos Speakers. 

Previously. No issues streaming to a Play 5, Sub, 4 x ones and 2 x Roams. Perfect playback. 

Lately I’ve been having drop outs. Only for a second but increasing in frequency lately. 

I’ve reset all speakers. 

All updates applied. 

Put them all on the 2.4ghz band. 

Disabled the 5ghz band in case it was interfering - made no difference. 

I’ve tried them with just one speaker at a time in the hope one speaker was interfering with the network. 

Tried several different channels on the router. 

Tried the different Sonos Net Channels 1, 6, 11

Connected a One to the router to create a Sonos net. That didn’t resolve the issue. 

Bought a Boost - that didn’t resolve the issue. 

Bought a new modem / router - that didn’t resolve the issue. 

Nothing solves the issue. 

Playing music stored on my phone/iPad plays back perfectly. 

Tried other windows 11 pc but same issue. 

Music file types makes no difference. m4a mp3 wav aiff. 

Speakers in the same room as the router/modem are affected as well as speakers in the rooms upstairs too so not a signal strength issue I don’t think. 

Still the issue prevails. 

The most peculiar part is it always starts at track 8 or 9 onwards of any album I’m playing via iTunes from a pc. 

Has anyone else encountered this and fixed it? 

Any help appreciated and sorry for the long post x

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
GKerrAnswer
Contributor I
Jan 26, 2023 1:31 PM UTC

First of all I’d like to say a HUGE thank you for all your help with this issue that has been plaguing me for months.

 

I’m not the most tech savvy person but by far not the worst I like to think and your messages and attempts at resolution were very easy to understand and have been a great help.

 

Having given it some thought I’ve opted to set fire to everything and start again 🤣🤣🤣

 

Just kidding lol 

 

Ethernet from Router to Living Room 4 speaker seems to have created a more stable Sonosnet.

 

But what I have also done is create a Stereo Pair in the Bedroom and a Stereo Pair in the Office.

 

What prompted the idea was what you said about the out of sync being imperceptible up till the point where the speaker ‘’dropped out’’ to catch up. My thought was well if speakers are trying to catch up at different times and not all at once then perhaps this would help – it did 😊

 

Now, having paired them, all I hear is a very slight dip in volume whilst the music plays continuously.

 

Office speakers are quite literally as far from the router as anything in the house could be – opposite ends but the music is playing perfectly now. Router at the east wall and Speakers at the West wall.

 

Likewise in the bedroom setup – playing perfectly.

 

The issue starting at around track 8 or 9 is more about the length of time as Buzz (I think it was Buzz) suggested about a resource becoming exhausted? I’m sure one day it will come to light as to what demon it is that’s playing hell with my patience and sanity within my PC 🤣

 

I really can’t thank you all enough for your help. 

 

Greatly appreciated and hopefully this post will go some way to resolve the same issue if anyone else experiences it.

 

I’ve got one final diagnostic report for you  

752795791  Hopefully everything looks much better?

 

Thank you all once again. Gary.

 

13 replies

GKerrAuthorAnswer
Contributor I
Jan 26, 2023 1:31 PM UTC

First of all I’d like to say a HUGE thank you for all your help with this issue that has been plaguing me for months.

 

I’m not the most tech savvy person but by far not the worst I like to think and your messages and attempts at resolution were very easy to understand and have been a great help.

 

Having given it some thought I’ve opted to set fire to everything and start again 🤣🤣🤣

 

Just kidding lol 

 

Ethernet from Router to Living Room 4 speaker seems to have created a more stable Sonosnet.

 

But what I have also done is create a Stereo Pair in the Bedroom and a Stereo Pair in the Office.

 

What prompted the idea was what you said about the out of sync being imperceptible up till the point where the speaker ‘’dropped out’’ to catch up. My thought was well if speakers are trying to catch up at different times and not all at once then perhaps this would help – it did 😊

 

Now, having paired them, all I hear is a very slight dip in volume whilst the music plays continuously.

 

Office speakers are quite literally as far from the router as anything in the house could be – opposite ends but the music is playing perfectly now. Router at the east wall and Speakers at the West wall.

 

Likewise in the bedroom setup – playing perfectly.

 

The issue starting at around track 8 or 9 is more about the length of time as Buzz (I think it was Buzz) suggested about a resource becoming exhausted? I’m sure one day it will come to light as to what demon it is that’s playing hell with my patience and sanity within my PC 🤣

 

I really can’t thank you all enough for your help. 

 

Greatly appreciated and hopefully this post will go some way to resolve the same issue if anyone else experiences it.

 

I’ve got one final diagnostic report for you  

752795791  Hopefully everything looks much better?

 

Thank you all once again. Gary.

 

Translate
Corry P
Sonos Staff
Jan 26, 2023 2:49 PM UTC

Hi @GKerr 

Don’t get me wrong - I am really glad to hear that you’ve found a way to minimise the impact/annoyance of each event by stereo-pairing - but the events are definitely still happening. Transmissions between the speakers look a lot better now, so if you don’t mind, I’d like you to try a little experiment comparing AirPlay to Music Library. Please follow these steps:

Add your music library to Sonos

Sonos allows you to stream your music library from any computer, or network attached storage drive, to your Sonos system. This article will show you how to add your music library using the Sonos app for macOS or Windows.

If you have already added your music library but have downloaded or removed music, created new playlists, or adjusted metadata, see our article on updating your Sonos music library.

  1. Open the Sonos app for macOS or Windows.
  2. From the Manage menu, select Music Library Settings.
  3. Click + (plus) on macOS, or Add if you are using Windows.
  4. If you use iTunes or are not sure where your music is stored, select My Music folder. If your music is not located in the My Music folder, select the appropriate option.
  5. Type in your computer’s password if prompted and follow the on-screen instructions to complete adding your music library. Depending on the size of your music library, it may take several minutes to index.

Once done, “Music Library” will appear in all of your Sonos apps as a new source of music. Test playing from there to your usual group of speakers and compare it to AirPlay-ing from iTunes. My honest expectation is that you’ll hear none of the issues you hear now.

I understand if you are feeling a bit of troubleshooting fatigue, so if you want to wait a few days or weeks before bothering, I won’t blame you. 😀

I hope this helps.

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein
Lyricist I
Feb 6, 2023 8:48 PM UTC

I’ve had issues like this as well with no results talking with customer service.  Had sonos products for over 8 years, now the streaming apps are 50/50 after I was pushed to flip to the S2 app.  Need to contact customer service regularly, who every time says ‘interference’ is the issue, interference is starting to sound like a word used for their poor design choices.  To go from  zero issues in 7 years vs monthly issues now sure seems like quite the downfall of a once great product, hopefully they fix something here.  

Translate