Skip to main content
Avid Contributor I
Mar 26, 2023 9:05 AM UTC
Answered

Sonos Era300 installation

Hi Folks, could someone kindly assist please? First and foremost I’m not a ‘guru’ with Sonos although I know my way reasonably around the app

i have purchased a pair of Era300’s to replace my now aging pair of play 1s as rears. Regarding the swop over will there be a software upgrade on release date? What I really need please is a STEP BY STEP procedure and in LAYMANS TERMS how to remove the play 1s and add the Era300’s. What may seem second nature to yourselves may not appear that way to myself 😢 and I don’t want to screw it up. I am fully aware of what to do once they are installed 🙂

Thank you very much

Martin

 

 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Ken_Griffiths
Mar 26, 2023 9:32 AM UTC

Your online community profile shows you have an older Playbar as the main Home Theatre master device, if that is the case the ERA 300’s do not bond as surrounds to that older Sonos device - you can only use them with an Arc or Beam (gen2).

Assuming you have one of the latter products - here are the steps.

  1. Add each of the new Era 300’s to your Sonos Household using ‘Settings/System/Add Product’ in the S2 Sonos App (or if prompted to install a speaker by the App, then use that option instead) - give them unique room names during their setup,,, example: ‘Lounge L’ and ‘Lounge R’.
  2. Next goto your Arc/Beam room in the App ‘Settings/System/[Arc/Beam Room Name]’ and select to remove the existing surrounds.
  3. After the removal of Surrounds then choose the option to ‘Add Surrounds’ in the same area of the App and add both Era’s called ‘Lounge L’ and ‘Lounge R’ - simply read and follow all the onscreen instructions and then setup of the HT will be completed
  4. Finally, assuming you’re still going to use them, you need to place/redeploy the older play:1 speakers elsewhere. So if moving them say to a kitchen or bedroom you can go into their room settings ‘Settings/System/[Play:1 Room Name]’ and rename them to kitchen or bedroom etc. and/or there’s an option in there to set them up as a stereo pair in one of the rooms of your choosing.
  5. Thats the job done, but don’t forget to return to each new rooms setup in ‘Settings/System’ in the App, if you are using compatible iOS controller device to ‘Trueplay tune’ each one of your new Sonos rooms.

HTH 👍

11 replies

Ken_Griffiths
Mar 29, 2023 1:38 PM UTC

What a game that was……not easy when things go wrong….

Ah okay sorry to hear the steps we posted earlier were not easy to follow, if you can state where things went awry we may be able to change the wording/steps to perhaps assist others.

I assume you got there in the end though?

Translate