What is the difference between the Sonos Amp v1 and v2?
I have a set of in ceiling speakers but the previous owner of my flat took the Amp so they don’t work and I don’t think I can afford a brand new V2 Amp. Would a Gen 1 Amp do the same job?
Page 1 / 1
The Amp doesn’t have a Gen 1 or Gen 2. The Connect:Amp, which preceded the Amp has a Gen 1 and Gen 2. The difference between those 2 models is Gen 1 is S1 only, Gen 2 is S1 or S2.
Thanks. Would something like this work on my ceiling speakers (or one similar)?
https://www.ebay.co.uk/itm/196900383161
Yes, but that is S1 only. If you are running S2, or intend to purchase other Sonos devices in the future, you should look for a Gen 2 which will run S2.
No I am not looking to purchase more Sonos any time soon. I have an original old Play 1 and a Beam (connected to the TV).
How does the TV sound connect to the ceiling speakers?
Does the Beam act as a bridge?
How does the TV sound connect to the ceiling speakers?
Does the Beam act as a bridge?
If you are looking to use them as surround speakers, you need to connect the Connect:Amp to the Beam via Ethernet cable vias the router or directly. See this link:
https://support.sonos.com/en-us/article/set-up-connect-amp-as-surround-speakers
And if i didn’t have a Beam? Is it still possible then?
No, without a Beam, Arc or other home theater setup you can’t have Surrounds.
If you just want to play music on them then having any other Sonos in addition to the Amp is completely optional.
Thank you. Would the ceiling speakers work as surround sound for the TV if the Amp was connected to the router through a wire?
It’s impossible to connect the Beam and the Amp due to location of each.
If you are going for a new Beam, it will be a Gen 2, so that would be S2 only. So if you still thinking about buying a Connect Amp it would need to be a Gen 2. The Connect amp would have to be wired to your router to be used as surrounds, the Amp would use a dedicated wireless link to the Beam.
You can use in-ceiling speakers as surrounds, but their placement (high up) would be less preferable. be sure only speakers that are behind your seating position are used as surrounds.
Thank you. Would the ceiling speakers work as surround sound for the TV if the Amp was connected to the router through a wire?
It’s impossible to connect the Beam and the Amp due to location of each.
The Connect:Amp and Beam need to be connected to each other, or both need to be connected to the router.
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.