Skip to main content
Contributor I
Jun 26, 2024 11:56 PM UTC
Question

Faint audio from Era 100 and Pro-Ject turntable

I bought a bundle from Sonos: Era 100 and Pro-Ject turntable with all the cables and adapters. 
 

It's all set up but the audio from the Sonos speaker is VERY faint and also sounds like static. I have double and triple checked the cables to make sure they are all plugged in tightly and correctly. I am using the “Line In” source via the Sonos app. I have played with all the audio settings and nothing makes a difference. Tried multiple records as well. 

Called Sonos and the wait time to speak with someone is an hour. Hoping someone can help? 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

4 replies

Pools-3015
Prodigy I
Jun 27, 2024 1:43 AM UTC

If the turntable has a built in preamp, go to the settings of the 100 and in the line in menu look for source level and select the level that sounds right to you.

If it does not have a built in preamp, you will need to get one for the TT to sound right.

Translate
Stanley_4
Grand Maestro
Jun 27, 2024 3:06 AM UTC

Double check the internal pre-amp settings to make sure it is on. It amplifies the signal but also applies the RIAA equalization curve that is essential to getting decent sound.

You can try toggling it on and off to make sure it is working.

Translate
Contributor I
Jun 27, 2024 6:33 AM UTC

Hi Stanley, how do I double check the internal pre-amp settings? 

Translate
Contributor I
Jun 27, 2024 6:54 AM UTC

Never mind! I found the switch on the side of the pre amp. Thanks! 

Translate