Skip to main content
Contributor I
Feb 11, 2024 8:35 PM UTC

Denon pma 600ne

Hi i have just purchased a denon pma 600ne and need a new set of speakers to match with it. I'm also thinking of getting a sonos era 300 and i was wondering whether i can use the eras to listen to the cd and turntable hooked to my denon amp. Can anyone enlighten me whether it's possible and how to do that if it is?

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

11 replies

Schlumpf
Virtuoso
Feb 11, 2024 9:32 PM UTC

@Jescam

Using Era speakers with the original sonos audio usb c adapter they are able to get an analogue audio line in signal to the complete Sonos system. Just connect any pre out or line out of the Denon with the Sonos adapter. 

Translate
Ralf
JescamAuthor
Contributor I
Feb 12, 2024 4:21 PM UTC

Thanks Schlumpf! You mean https://www.sonos.com/en/shop/sonos-line-in-adapter right?

Translate
106rallye
Feb 12, 2024 9:23 PM UTC

The Denon looks like being an amp to me. Amps are not meant to be connected to amplified speakers like the Era’s. If you’d want to play sound from the amp the way Denon and Sonos meant it you’d need passive speakers for the Denon and a Sonos Port to connect to it to get the sound a different Sonos set up.

Translate
Schlumpf
Virtuoso
Feb 14, 2024 11:41 PM UTC

@Jescam 

Not sure what exactly you like to do… I understood you as you want to buy some passive speakers for the Denon AND an Era speaker that should be able to play audio from the Denon. 
Maybe you can tell us about your intention. 

Translate
Ralf
buzz
Grand Maestro
Feb 15, 2024 12:00 AM UTC

You can connect the SONOS USB adapter to the DENON’s RECORDER AUDIO OUT and play whatever the DENON is playing through the 300 and/or any other SONOS players on your network. Note that there will be a 75ms delay for output from any SONOS units. This is not a major issue -- unless the SONOS speakers are in the same room as your DENON driven speakers.

Translate
Schlumpf
Virtuoso
Feb 15, 2024 7:41 AM UTC

Without @Jescam telling us what he wants to do in detail it‘s like some sort of quizz show. 😉

For most needs there also is a solution without a delay, if the Amp has got a pre out or rec selector. 

Translate
Ralf
JescamAuthor
Contributor I
Feb 15, 2024 1:45 PM UTC

Lol! Yes I guess schlumpf is right! Ok essentially I'm looking to replace my existing wired JBL speakers and I'm looking at alternatives. I was wondering whether wireless speakers like the sonos era 300s might be an option. Hope that clarifies. From the previous replies it seems that it is technically possible but not everyone seems to agree on the wisdom of that choice. Am i right in assuming that?

Translate
buzz
Grand Maestro
Feb 15, 2024 2:22 PM UTC

Only you will know what sounds “”best” (to you). If you go with wireless speakers, the DENON is not required. If you have a turntable connected to the DENON, you may need a phono preamp if the turntable does not incorporate an internal preamplifier.

Translate
Schlumpf
Virtuoso
Feb 15, 2024 5:18 PM UTC

As @Jescam said he wants to use his turntable AND CD player both. So he can use the Denon reduced to an analogue switch function. If the turntable has got a line out with build in pre amp, I would consider taking a small 2x1 analogue switch instead of the Denon. But replacing the Denon with a switch plus a pre amp imho isn’t a big advantage. 

Translate
Ralf
106rallye
Feb 15, 2024 6:27 PM UTC

Why would you buy a new amp, only to use it as a glorified switch, though?

Translate