Change from SonosNet to WiFi

There are people with instability issues, but then there always have been so you can’t use that as pre-emption for whether things will work for you. 

There’s no reason your system should tank by moving to wifi as that is what Sonos is now built for, so provided the app is up to date and you have run the very latest system updates, connecting via wifi should prove seamless. I’m sure there will be a vociferous few that jump in cautioning against it, but ultimately it’s up to you. The volume of those having issues is significantly less then it has been for the last year….

​@MrWhite22, have you tried and changed the SonosNet channel?

https://support.sonos.com/en-us/article/change-your-sonos-system-s-wireless-channel

Thanks for the info.  All but one of my set up is Play:1, Play:3 speakers so these need to be hard reset before moving to WiFi.  A single Sonos One will move automatically, so this where the playlists etc. will hopefully stay whilst the other speakers are rest.

It’s nothing to do with the channel.  It’s different from the 2.4Ghz channels used by my Wifi and no external interference.  Spotify connect works just fine, so it’s either Sonos networking or SonosNet (or the App!)

​@MrWhite22 

Unless you know for certain that the speakers absolutely do need to be hard reset, I’d just see whether anyone else on here can offer some advice on the best way to change from SonosNet to wifi. I was under the impression that removing the ethernet cable from the speaker that is creating the SonosNet network would mean that each speaker then seeks wifi - but I could be way off. But hard resetting a Sonos speaker is often the source of further problems so maybe someone else can advise on here.

I’ve never heard of a requirement for speakers to be hard reset to move back and forth between SonosNet and WiFi. Where did you read that? I’ve never done that, and my PLAY:1s and PLAY:3s and all other speakers, but newer, moved fairly seamlessly between full WiFi and SonosNet. Was I missing something?

Maybe there's a bit of confusion. Older (non-BLE) speakers need to be reset to change wifi credentials. Maybe not to ad the credentials for the first time?

Not as long as they’re connected at the time the credentials are changed. Requires some forethought if doing while connected via WiFi, or easily done by connecting the speaker temporarily via Ethernet cable. Essentially, the Sonos needs to be able to communicate the change to the computer (WiFi system)  on the device. You should never, to my knowledge, need/have to factory reset the device. 

That does sound logical. A welcome addition to https://support.sonos.com/en-us/article/connect-sonos-to-a-new-router-or-wi-fi-network that does not mention this.

Thanks all for your replies. If you look at the link in my original post, this is where I got the information that you have to hard reset the older devices 

I do see, however I disagree with that persons assertion. As previously stated in this thread, I’ve never had to do such a thing, on any of my Sonos products, including several PLAY:1s and PLAY:3s. Despite switching back and forth between WiFi and SonosNet.