Skip to main content
Contributor I
January 15, 2023
Answered

Audio in one room cuts out and in while group playing music everywhere in the house

Hello, I need help with audio cutting out and in while group playing music everywhere in the house. 
 

My “Family Room” group is the room that cuts out and in intermittently while listening to music but the other rooms continue playing normally. Very irritating. The Family Room includes the Sonos Playbar, Sub, and two Sonos Ones with surround sound set up for our main TV. No connection to router issues as the router is in the same room right next to the playbar. Completely factory reset all devices in the room but unfortunately the issue returned. The TV is not on during streaming of music. Please help!

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Airgetlam
AirgetlamAnswer
January 15, 2023

I would expect that this is most likely some sort of wifi interference , with the family room not getting the data when streaming. In particular, I’d be looking at devices that may be too close, especially given your statement about the router being ‘right next to the PLAYBAR’.

Another possibility, although perhaps more remote, is simple duplicate IP addresses, which could easily be tested by a relatively simple network refresh. Unplug all Sonos devices from power, and then reboot your router. Once the router has had a couple of minutes to reboot, plug back in the Sonos devices. If this fixes the issue, it could only be a temporary fix, any router that has handed out bad IP addresses to the Sonos during the Sonos software update process might do so again in the future, so reading the router’s manual and learning how to assign reserved IP addresses for all of your network devices would be a good step. 

Please don’t further factory reset any devices, ultimately, that deletes any data that might help Sonos help you, and as you’ve found, rarely ‘fixes’ an issue, at best sometimes postpones the reoccurrence.

This is just two potential causes for drop outs. Without hard data to look at, I’ve picked out the most likely to help answers, but should this behavior continue,  I would recommend that you submit a system diagnostic within 10 minutes of experiencing this problem, and call Sonos Support to discuss it.

There may be information included in the diagnostic that will help Sonos pinpoint the issue and help you find a solution.

When you speak directly to the phone folks, they have tools at their disposal that will allow them to give you advice specific to your Sonos system and network.

 

Bruce

15 replies

Stanley_4
Grand Maestro
December 4, 2023

Since you are sure it isn’t your network you are probably best off collecting a diagnostic when you have your next issue. Call Sonos support with the number it provides and see what they can see.

A lot of issues are network related, even if that doesn’t seem possible so trying the suggested steps to check that can often solve an issue.

https://support.sonos.com/en-us/article/improve-your-sonos-products-wifi-connection

Airgetlam
December 4, 2023

It seems unlikely that the issues are due to Sonos’ software. Sonos does exercise your network substantially more than most other network devices, due to their need to intercommunicate constantly. My guess would be that there is just enough wifi interference to cause random issues with your Sonos, or even duplicate IP address issues on your router. 

For what it’s worth, I’ve found no real relationship between the graph bouncing in the controller, and anything actually playing on my system, at least not directly. 

I’ve never seen Sonos release a product, since they’ve been in business, without first releasing an updated controller that contains that speaker’s definitions in the new software. Which speakers did you have that Sonos hadn’t released software for? Or are you getting access to Sonos devices before they’re released for sales?

Bruce
Lyricist I
December 9, 2023

This is happening to me now…found this thread, same issue. Sonos in 5 rooms has been working fine for many years and just starting having this cut outs. Nothing has changed in my home. Internet and WiFi working great and I live in the country, no interference near me… Guess I’ll be calling support! 

Lyricist I
January 23, 2024

Recently started having this issue where particular rooms with the Playbar and Sonos ones will drop audio will the other rooms will keep playing. I submitted the system diagnostics and contacted support. 

The response:

there is an issue with the Family Room, specifically the Playbar, that is not connecting properly to your WiFi. The issue is when it request for the WiFi channels on your WiFi and it is unable to pick the required information on the system, so it ends up affecting the system and causing this audio issues. We are aware of this issue and are investigating. At this time, rebooting this device is the best way to alleviate this issue. We do not currently have an ETA. 

 

Thanks a lot for reporting this, since this help us investigate what can be causing the issue with the diagnostics and all the information provided.

 

‐----------‐--------------###-------------‐----------------

I did reboot my Playbar and Sonon One's as requested. I have been up and running for about 30 mins without dropping audio, so hopefully resolved for sometime.

 

So if this is happening, please submit the diagnostics so they can hopefully resolve this permanently.

Enthusiast II
January 26, 2024

S2 is broken for older S2 compatible devices and the only solution (until Sonos fixes it) is to revert back to S1. 
 

Over on the architectural forum there has been a gathering momentum around the fact that Sonos broke S2 for older devices back in the summer of 2023. 

This has taken a long time to come to light because each reporting of ‘my system is dropping out and my devices can’t be found or won’t connect’ is met with derision by forum members and the insistence that it’s an environment issue  

Sonos has finally admitted that there is a problem affecting Gen2 Connect and Connect amps  

It looks like the problem is affecting older speakers too.

So if you have this problem, revert back to S1 until Sonos fixes S2 for older devices.