Translation:
Good afternoon.
I have Beam 2 + 2 One + Sub Mini.
I want to add Denon DCD600 Player CD and a Marshall speaker to the Sonos system. I have 2 questions:
1- Do I do it through Port? Can I connect the Denon and the Marshall speaker?
2- Do I also need an amplifier for the Denon Player? Denon PMA-600NE???
I don't want to buy them and then they don't work well.
Thank you
- Potentially, yes. Is the Marshall speaker self powered, and will accept a line level line out from the Port? If so, a Port might be the ideal device.
- No need for a ‘pre-amp’, the CD player would provide a line level output that the Sonos Port would accept.
- Potencialmente, sí. ¿El altavoz Marshall es autoalimentado y aceptará una línea de nivel de línea desde el puerto? Si es así, un puerto podría ser el dispositivo ideal.
- Sin necesidad de un "preamplificador", el reproductor de CD proporcionaría una salida de nivel de línea que el puerto de Sonos aceptaría.
Many thanks,
- Potentially, yes. Is the Marshall speaker self powered, and will accept a line level line out from the Port? If so, a Port might be the ideal device.
Its Marshall Stanmore II and would be connected to the Denon CD Player.
If I connect a Denon CD to the port, would the marshal be detected?
- No need for a ‘pre-amp’, the CD player would provide a line level output that the Sonos Port would accept.
Port does not work as an amplifier and CD Denon seems to need an amplifier, for example:
If I use Port, with CD Denon, I dont need amplifier?
Many thanks!!
https://www.amazon.es/DENON-PMA600NEBKE2-Denon-PMA-600NE-Amplificador/dp/B07YCVDKJT/ref=pd_aw_fbt_img_m_sccl_1/261-5635163-5370040?pd_rd_w=ci3pA&content-id=amzn1.sym.304c7ebb-081a-4878-a501-d1e6ca05cf3b&pf_rd_p=304c7ebb-081a-4878-a501-d1e6ca05cf3b&pf_rd_r=CZER7XEGD8QS056SWVFJ&pd_rd_wg=rEcSB&pd_rd_r=b9896015-752f-4ca7-9055-3fd271defa74&pd_rd_i=B07YCVDKJT&psc=1
Many thanks for help me.!!!
My idea and scheme is in this photo.I'm worried about spending €300 on Denon CDs and €400 on Port and then it won't work. (Marshall I already have it)thank you!!
That looks good. You could also put a dotted line between the Port and the Beam, if you wanted, they will communicate via WiFi or Ethernet cables to the router. You’ll be able to direct the line in (CD player) to either the line out on the Port, or the Beam, or both at the same time. And you’re welcome ;)
Eso tiene buena pinta. También podría poner una línea de puntos entre el puerto y el Beam, si lo desea, se comunicarán a través de WiFi o cables Ethernet con el enrutador. Podrá dirigir la línea (reproductor de CD) a la línea de salida en el puerto, o al haz, o ambos al mismo tiempo. Y de nada ;)
If I activate the line, I can do it by zones or the entire set, which is what I want, but in this situation will the Marshall suffer sound delay with respect to the beam?
Many thanks from Spain!!
No difference between sending the line in to one device (output), or many. That is what Sonos is designed for.
Again, you’re most welcome!
No hay diferencia entre enviar la línea a un dispositivo (salida) o a muchos. Para eso está diseñado Sonos.
De nuevo, ¡de nada!
Ah, the delay you’re worried about occurs when the line in goes into the Sonos. The delay is handled at the input, and you wouldn’t notice it with any connected devices, or other Sonos devices. The only time you’d notice it if you were to connect the CD player directly to the Marshall, and the Sonos at the same time.
Ah, el retraso que te preocupa ocurre cuando la línea entra en el Sonos. El retraso se maneja en la entrada, y no lo notaría con ningún dispositivo conectado u otros dispositivos Sonos. La única vez que lo notarías si conectaras el reproductor de CD directamente al Marshall y al Sonos al mismo tiempo.
