Skip to main content
Contributor II
Aug 26, 2008 10:55 AM UTC

ZP80, ZP90 connected directly to Power Amplifier

I am thinking of connecting my ZP80 directly to a Power Amplifier (using RCA cables from the analogue out).

Does anyone have any experience of doing this?

I am not an expert in music engineering, so I have a few questions that I do not seem to be able to Google my way out of:

1. What is a suitable Input Impedance and Input Sensitivity for the Power Amplifier?

2. Will I find that the results are extremely loud (i.e. I will only be able to use the very bottom of the volume control and risk blow-out if I accidentally switch to fixed volume).

3. Is the volume control on the ZP80 an attenuator or is the volume controlled by altering the digital signal? (This question relates to the analogue out.)

Thanks for any help!

John
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

22 replies

Avee
Avid Contributor I
Jan 20, 2009 1:37 PM UTC
Does the ZP90 affect sound quality by sound control, when connected to an external DAC? I can't here that, but it would interest me from the technical point of view.


On this thread, malcolm kind of officially confirms that the bit reduction involved in volume control doesn't reduce the resolution of the 16-bit audio, since internal processing and digital output is 24 bit. So there is room to shift the entire information to less significant bits without losing any bits.
Translate
Avid Contributor I
Sep 7, 2011 2:33 PM UTC
I want to connect a ZP90 directly to a 2-channel power amp. I'm tired of switching on my amp, selecting the input and turning the volume up before I can use the CR200. I like the ease of my Play5 and ZP120.

The amp must have input adjustment and audio sensing.

There where a few that I found:
-I've read a lot about AudioSource on this forum, but I don't think I can buy one in Europe.
-I don't think any of the new models from Rotel have audio sensing.
-The only one I could find is the NAD C 275BEE Stereo Power Amplifier. But I don't like the looks of that thing.

Anyone tried one of the above? (Or another one?)
Translate
Contributor I
Oct 24, 2011 11:35 PM UTC
I use the Parasound A23 with a ZP90, works great and has the features you require. They also offer the A21 with more power, or the 2125 and the 2250, both are from the lower classic line. They all do what you want with audio sensing. The classic line allows for two stereo sets of speakers to be connected. The Halo line has loop out to allow additional amplifiers to be connected for additional stereo sets of speakers to be connected. Hope this helps.
Translate
Contributor III
Nov 10, 2011 9:14 PM UTC
I have the same general question, but I am not an experienced audiophile, and I'm not sure I understand the answers above. I plan to use a ZP 90 in my living room, and I've ordered a Rotel RB 1080 amplifier, with B&W 804s speakers. The Rotel has no pre-amp (ie volume control) and I thought I would control volume using the ZP 90. I am now concerned that I should have purchased an integrated amplifier which would give me the ability also to regulate volume on the amplifier. I had assumed I would just use the analog outputs from the ZP 90. From reading the posts of this thread, some posts seem to indicate I won't have a problem, but others suggest that for excellent sound quality I'd want to purchase a separate DAC (which I understand only vaguely) or buy a pre-amp to regulate volume. I'd like to think everything will work fine as ordered, but if my inability to control volume at the amplifier is going to be a problem, the best solution might be to send back the amplifier when it arrives for an integrated amp with volume control (of course that might trigger shipping charges but I assume it would be better to deal with this issue before I take things out of the box). Thanks for your thoughts.

I was thinking of doing a similar setup getting some decent speakers and an amp. How did your system do for you? I find most responses on these forums way too technical for me.
Translate
Lyricist II
Feb 19, 2018 11:37 AM UTC
Hi , I have a Sonos Connect . I have ordered a Chord qutest DAC.

My plan is to connect it the following way...

Sonos to chord Dac

From Dac to power amp

So the only way I can control volume is from the Sonos app. Will this work?

Any suggestions much appreciated .

Thanks
AB
Translate
Feb 19, 2018 11:57 AM UTC
Yes, just don't forget to set the Connect to variable level first.
Translate
Lyricist II
Feb 19, 2018 11:59 AM UTC
Ok thanks Kumar
Translate
ratty
Feb 19, 2018 12:23 PM UTC
Long ago it was confirmed that the digital output was 24-bit. (The ZP80 is an ancient forebear of the CONNECT.) This means that the Sonos volume can be adjusted right down to about -48dB before any of the original 16-bit information starts to be truncated.
Translate
Lyricist II
Feb 19, 2018 12:26 PM UTC
I am subscribing to tidal hifi , how many bits is that?
Translate
ratty
Feb 19, 2018 12:31 PM UTC
I am subscribing to tidal hifi , how many bits is that?
Their standard FLAC is Red Book 16-bit at 44.1kHz. Some users have commented that Tidal's MQA, which is sent as 24-bit/48kHz (and possibly 24/44.1), is also playable. However the input is apparently truncated to 16-bit before Sonos processes it.
Translate