Skip to main content
Contributor I
Jan 28, 2017 5:26 PM UTC

When will 5Ghz work?

Hi, anyone know if 5G will work on Sonos?
Thanks
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

52 replies

Lyricist I
Mar 12, 2018 6:09 AM UTC
sonos engineers could add an option to use 5ghz. somewhere deep in settings to avoid unintened use by pnp users. this would solve most if not all issues discussed here. why not, Sonos?
Translate
Airgetlam
Mar 12, 2018 6:28 PM UTC
Probably because they want to maintain compatibility with the devices that were made before the 5Ghz wifi cards were available or cheap enough to include.
Translate
Bruce
Contributor I
Aug 22, 2018 5:53 PM UTC
well, just spent $700 on a playbar, but to make it work i need to spend another $100 to BOOST existing WIFI 'down' to 2.6. only an engineer would appreciate this, NO ONE ELSE. Just as bad as APPLE, buy this to make our product work for you.
Translate
melvimbe
Aug 22, 2018 6:13 PM UTC
well, just spent $700 on a playbar, but to make it work i need to spend another $100 to BOOST existing WIFI 'down' to 2.6. only an engineer would appreciate this, NO ONE ELSE. Just as bad as APPLE, buy this to make our product work for you.

Not exactly. If you plug the playbar directly to the router, no Boost required. If you had a router that can handle 2.4 and 5.0 wireless, no boost required. And I don't think you can really call 2.4 a downgrade over 5.0 since they clearly have strength and weaknesses in comparison to each other.
Translate
Danny
Contributor I
Aug 22, 2018 6:15 PM UTC
Wifi in one room , TV etc in another ; cant plug into router
Translate
melvimbe
Aug 22, 2018 6:16 PM UTC
Then consider whether your money is better spent on a Boost or an upgraded router.
Translate
Danny
Lyricist II
Aug 26, 2018 11:36 AM UTC
Is your Sonos actually working or not? I have used Sonos in an apartment where there were at least a dozen competing 2.4GHz networks. No issues. But I'm sure Sonos will be grateful for your expert insights. :)

Preferring 2.4 or 5 depends on the context. In some cases (for examples, big houses in not-very-crowded areas), 2.4 GHz is better than 5 GHz. In other cases (for example, crowded areas or Wi-Fi in public venues with high usage), 2.4 is a catastrophe.
I live in Paris (high density: >20k inhabitants per km²). Plus, most ISPs historically activated 2.4 and not 5 on their residential routers, and fiber is broadly available. So the typical situation is that you have something like 100 2.4GHz BSSID struggling to try to have some bandwidth (even if they have a 1 Gb/s Internet connection, they usually can enjoy a lot less) and just some 5GHz BSSID, all on distinct channels! Given the relatively small sizes of apartments, you have a very good RSSI in 2.4 and in 5, so this is not at all a signal level debate.

I have an enterprise-grade Wi-Fi access point, my domestic network is optimized for 5 GHz. On my laptop or smartphone, I usually get 300 Mb/s bandwidth, with a ping close to zero. I have a 2.4 GHz BSSID for legacy devices (my Kindle for example... and unfortunately Sonos).
My Sonos speaker worked fine when I lived in a less crowded city, where I had a decent service in 2.4 GHz (something like 20 competing BSSID only). Now it does NOT work fine, I regularly have to go to my wifi AP settings to see the environment and change the channel. This morning, for example, I was on channel 11. Channel utilization was rather low on channel 11, so you could think service is fine... But there were high Wi-Fi usage on channels 10 & non-Wi-Fi RF utilization on channel 12… So I switched to channel 1… It works again. ‘Til next time…

sonos engineers could add an option to use 5ghz. somewhere deep in settings to avoid unintened use by pnp users. this would solve most if not all issues discussed here. why not, Sonos?
It seems obvious that it would be the smartest option... Please Sonos staff, do it!!!
Translate
buzz
Grand Maestro
Aug 26, 2018 12:41 PM UTC
Older SONOS units do not include 5G radios.

One potential solution would be to install repeaters, extenders, or mesh units that support a 5GHz backbone and an Ethernet connection sharing that backbone. Plug your SONOS units into this network port.
Translate
Lyricist II
Aug 27, 2018 8:30 AM UTC
One potential solution would be to install repeaters, extenders, or mesh units that support a 5GHz backbone and an Ethernet connection sharing that backbone. Plug your SONOS units into this network port.

Thanks for your reply. That's actually what I was planning to do, but my understanding is that the 'Play:1' has a 5 GHz radio, but we can't use it without Boost, am I right?
Translate
ratty
Aug 27, 2018 9:33 AM UTC
The Play:1 5GHz radio is only used when they're configured as surrounds with a Playbar/Playbase/Beam. It has nothing to do with whether the system's in 'Boost' or 'Standard' setup.
Translate