Skip to main content
Contributor I
May 15, 2014 12:23 PM UTC

unplugging temporarily to move a speaker

If i need to temporarily unplug a sonos component that is already configured and working, is there a re-start up procedure, or will it reboot itself when it is plugged back in?
    This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

    15 replies

    jgatie
    May 15, 2014 12:59 PM UTC
    No special procedure needed, just plug it in and after it boots up you should see it appear again on the controller.
    Translate
    Lyricist III
    May 24, 2014 6:56 PM UTC
    Please add some commentary on what happens to groups and queues when a speaker temporarily loses power. My experience is that groups are dissolved and queues are cleared. This means that if a GFI breaker trips or someone unplugs a speaker for a minute to move a chair or a table that all music playback can stop and someone must recreate the group and add music back to the queue.
    Translate
    May 24, 2014 10:50 PM UTC
    Your experience is the way it is. But most users rarely unplug and maybe don't get sad and disappointed by the consequences. You could save a queue as a playlist if it's something you want longer term.
    Translate
    Lyricist III
    May 25, 2014 9:15 AM UTC
    I have the same problemen, when a breaker trips or the wife moves play 1 from kitchen to veranda the group is canceld then they call me to come and fix it. 😞
    Translate
    Lyricist III
    May 27, 2014 12:10 AM UTC
    Seems like I might as well have wired speakers if moving a wireless speaker requires a reconfiguration and reloading of current playlists :)

    The most annoying thing is that my patio Play1 is on a circuit with a GFI, and the GFI gets tripped occasionally. It would be great if resetting the breaker was enough to get the music playing again.
    Translate
    mgutt
    Enthusiast II
    Jul 2, 2015 10:32 AM UTC
    Seems like I might as well have wired speakers if moving a wireless speaker requires a reconfiguration and reloading of current playlists :)

    The most annoying thing is that my patio Play1 is on a circuit with a GFI, and the GFI gets tripped occasionally. It would be great if resetting the breaker was enough to get the music playing again.

    Vote here to avoid loosing the playlist:
    https://ask.sonos.com/sonos/topics/default_source_when_turning_on_power
    Translate
    Jul 2, 2015 10:40 AM UTC
    Can we just be clear on terminology here?  Unplugging loses the current queue.  It does not remove stored Sonos playlists.
    Translate
    mgutt
    Enthusiast II
    Jul 3, 2015 7:07 AM UTC
    Seems like I might as well have wired speakers if moving a wireless speaker requires a reconfiguration and reloading of current playlists :)

    The most annoying thing is that my patio Play1 is on a circuit with a GFI, and the GFI gets tripped occasionally. It would be great if resetting the breaker was enough to get the music playing again.

    Of course I mean the queue and not saved favorite playlists. I'm using Sonos in German and there it is called "list". 😉
    Translate
    Lyricist II
    Nov 28, 2015 6:19 PM UTC
    I spoke to a SONOS rep at a demo of the new PLAY 5 the other week and asked about unplugging a speaker in a group and it gets removed from the group. He said that it's so that people who unplug and move a speaker will want it to put it in a new group. I consider this presumptuous. If someone wants to do that then they should be OK to reset the group. However I expect most people would like to have the speaker revert to the group it is in when the power comes back. Especially when the speaker being unplugged is the group master.

    So please change your view to this. If I want to unplug my conservatory speaker and plug it into an extensipn reel to take outside I don't want to have to mess about with the controller.
    This should only be a small code change for your system as the speaker is already remembered when it is plugged in again. Alternatively make it an option to have groups fixed unless the user changes them.
    Translate
    Contributor I
    Oct 1, 2016 11:48 PM UTC
    I spoke to a SONOS rep at a demo of the new PLAY 5 the other week and asked about unplugging a speaker in a group and it gets removed from the group. He said that it's so that people who unplug and move a speaker will want it to put it in a new group. I consider this presumptuous. If someone wants to do that then they should be OK to reset the group. However I expect most people would like to have the speaker revert to the group it is in when the power comes back. Especially when the speaker being unplugged is the group master.

    So please change your view to this. If I want to unplug my conservatory speaker and plug it into an extensipn reel to take outside I don't want to have to mess about with the controller.
    This should only be a small code change for your system as the speaker is already remembered when it is plugged in again. Alternatively make it an option to have groups fixed unless the user changes them.


    I completely agree this should change (although give the rep a break). I bought a Play:5 to move from my balcony to my bedroom and it's a small but noticeable pain to re-add it every time I move it.

    I'd expect it's a common use case to have a fairly static 'living room' and then one more sonos play:5 or play:3 to move around elsewhere.

    Even if I were rich enough to just get extra play:5s I'd still have to bring the balcony player inside to avoid weather damage.
    Translate