Skip to main content
Contributor I
Dec 29, 2022 12:48 AM UTC
Answered

Trouble adding wired system to existing wireless system

In our living room we have a Beam (Hard wired) and 2 Play:1’s (wireless) as a stereo pair.

Kitchen: 2x One’s (wireless) as a stereo pair.

Dining Room: 2x One’s (wireless) as a stereo pair.

Downstairs Bathroom: 2x Roams.

This has all worked perfectly for over a year. All 3 zones have perfect WiFi coverage.

Today I tried to add 2x One SL’s, 2x Sub Gen 3’s and an Arc to our media room (converted garage)

Our WiFi coverage works literally half way into this room, the rear ones were picked straight away as they are closer to the router but adding the arc and subs took forever of hitting retry, and rebooting I eventually realised it was because of the WiFi, I added a hardwired WiFi access point with a different SSID and tried to add the new stuff to the new network, after over an hour failing I disconnected the access point and hardwired all the new stuff, rebooted it and one by one (totally stupid) disabled WiFi and now everything but 1 sub works.

I can factory reset it and it shows up for a few mins and disappears again.

To make matters worse now one of the kitchen One’s won’t work and just shows a question mark, rebooting it does nothing.

In about my system is says that EVERYTHING is WM:0, does this mean everything is trying to connect through one of the wired devices?

I’ve spent so many hours pi$$ing into the wind I could cry.

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
John BAnswer
Dec 29, 2022 10:25 AM UTC

I agree entirely with @106rallye .

The first thing you should do is re-enable wifi on ALL your Sonos devices, whether wired or wireless. "Disabling WiFi" was a mistake. 

Leave the Beam and Arc wired. Leave everything else wireless. Get the Arc working then add the Subs and surrounds.

In Settings, System, Network, Manage Networks, remove all details of your SSIDs and passwords.

You may need to reboot the router and Sonos devices to help it to reconfigure.

13 replies

106rallye
Dec 29, 2022 10:03 AM UTC

When one of the speakers is wired, all speakers revert to a dedicated Sonos network (“Sonosnet”).; WM:O in the app. By using the wired connection on your Beam you’ve set up your system to use Sonosnet. Mixing Sonosnet and wifi (with different SSID’s to boot) will create problems.

Furthermore: if you are really trying to add the Arc to the surrounds, you are going about it the wrong way. In a surround set up you start with setting up the soundbar and than add the surrounds and/or Sub.

Translate
Contributor I
Dec 29, 2022 10:17 AM UTC

When one of the speakers is wired, all speakers revert to a dedicated Sonos network (“Sonosnet”).; WM:O in the app. By using the wired connection on your Beam you’ve set up your system to use Sonosnet. Mixing Sonosnet and wifi (with different SSID’s to boot) will create problems.

Furthermore: if you are really trying to add the Arc to the surrounds, you are going about it the wrong way. In a surround set up you start with setting up the soundbar and than add the surrounds and/or Sub.

No definitely not trying to add the Arc to the surrounds, I understand that the surrounds and subs have to be added TO the Arc.

The issue is one sub keeps disappearing and one of my kitchen speakers is seemingly gone for good.

I gave up trying to use multiple SSID’s and now all I want is for the Media room to be totally wired.

Translate
John BAnswer
Dec 29, 2022 10:25 AM UTC

I agree entirely with @106rallye .

The first thing you should do is re-enable wifi on ALL your Sonos devices, whether wired or wireless. "Disabling WiFi" was a mistake. 

Leave the Beam and Arc wired. Leave everything else wireless. Get the Arc working then add the Subs and surrounds.

In Settings, System, Network, Manage Networks, remove all details of your SSIDs and passwords.

You may need to reboot the router and Sonos devices to help it to reconfigure.

Translate
Contributor I
Dec 29, 2022 10:28 AM UTC

I agree entirely with @106rallye .

The first thing you should do is re-enable wifi on ALL your Sonos devices, whether wired or wireless. "Disabling WiFi" was a mistake. 

Leave the Beam and Arc wired. Leave everything else wireless. Get the Arc working then add the Subs and surrounds.

So by having the Arc and Beam wireless that causes them to broadcast their own WiFi networks that everything else will join?

Any idea why one of my kitchen speakers that’s worked perfectly until now is MIA?

Translate
Dec 29, 2022 10:31 AM UTC

Do NOT wire the Subs and surrounds in the Media Room. Do NOT "disable wifi" on any device. You are preventing the HT from working as designed. 

Translate
Dec 29, 2022 10:35 AM UTC

I agree entirely with @106rallye .

The first thing you should do is re-enable wifi on ALL your Sonos devices, whether wired or wireless. "Disabling WiFi" was a mistake. 

Leave the Beam and Arc wired. Leave everything else wireless. Get the Arc working then add the Subs and surrounds.

So by having the Arc and Beam wireless that causes them to broadcast their own WiFi networks that everything else will join?

Any idea why one of my kitchen speakers that’s worked perfectly until now is MIA?

No you should leave the Beam and the Arc wired. But do not "disable WiFi". That actually disables the wireless radio on the device and prevents the direct communication between soundbar and surrounds / Subs

Translate
Dec 29, 2022 10:52 AM UTC

Regarding the kitchen speaker being MIA, I think we get your system back onto a sound footing and then see if it is still MIA.

Translate
Contributor I
Dec 29, 2022 4:34 PM UTC

Regarding the kitchen speaker being MIA, I think we get your system back onto a sound footing and then see if it is still MIA.

Thanks for the help John, re-enabled WiFi on all devices and left the Beam and ARC wired, had to reset one of the Kitchen speakers by pressing and holding the link button till it flashed orange which fixed that one.

Everything works perfectly now 🙂

 

 

Translate
Dec 29, 2022 6:10 PM UTC

Excellent. Thanks for posting back.

Translate
Stanley_4
Grand Maestro
Dec 29, 2022 6:26 PM UTC

One more topic that probably would have never been needed if Sonos would just change that “Disable WiFi” to “Disable Radio” and not misdirect so many folks.

You have to wonder how much kit has been returned to Sonos in frustration over this simple thing.

Translate