Skip to main content
Arnie328
Avid Contributor III
Aug 2, 2019 6:46 PM UTC
Answered

Stereo pair with Symfonisk

Would I be able to join a Symfonisk speaker with a Play: 1 to create a stereo pair?
    This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
    MisfitAnswer
    Enthusiast II
    Aug 2, 2019 7:44 PM UTC
    No. Needs to be a 1 to 1 pair.

    So you would need two of the same Symfonisk speakers, or two Play:1's in order to create a stereo pair.

    15 replies

    MisfitAnswer
    Enthusiast II
    Aug 2, 2019 7:44 PM UTC
    No. Needs to be a 1 to 1 pair.

    So you would need two of the same Symfonisk speakers, or two Play:1's in order to create a stereo pair.
    Translate
    Arnie328
    Arnie328Author
    Avid Contributor III
    Aug 2, 2019 8:00 PM UTC
    That's too bad. OK. Thanks for the quick reply.
    Translate
    Enthusiast II
    Aug 2, 2019 8:03 PM UTC
    Yeah understandably so.

    There are some 3rd party apps that may allow you to do this though. Check out Sonosequencer

    I have no personal experience with it so cannot vouch for it. And seeing how the Symfonisk speakers are brand new, don't know how the Sonosequencer will interact with them.
    Translate
    Lyricist III
    Aug 3, 2019 10:44 AM UTC
    Wouldn’t it sound out of balance if you had different speaker models in a stereo pair? Having to be identical makes so much more sense.
    Translate
    Ken_Griffiths
    Aug 3, 2019 11:04 AM UTC
    Wouldn’t it sound out of balance if you had different speaker models in a stereo pair? Having to be identical makes so much more sense.
    I would think so, plus isn’t there perhaps also a risk/chance, that if any damage, or a problem, did occur with either speaker, that’s using such unsupported pairing, that it might invalidate any existing warranty/access to customer support.
    Translate
    Avid Contributor I
    Sep 14, 2019 10:04 AM UTC
    Sorry to poke this one again, but...

    If the symfonysk is a Play 1 in new clothes, why can't I stereo pair it?

    I want a light in the corner of my living room, so I've replaced a play 1 with a symfonysk. In the other corner is a play 1 I used in a stereo pair as the back of my living room system. I don't want a light there.

    They're essentially the same speaker. So surely pairing them should be allowed?
    Translate
    ratty
    Sep 14, 2019 11:04 AM UTC
    Sorry to poke this one again, but...

    If the symfonysk is a Play 1 in new clothes, why can't I stereo pair it?

    I want a light in the corner of my living room, so I've replaced a play 1 with a symfonysk. In the other corner is a play 1 I used in a stereo pair as the back of my living room system. I don't want a light there.

    They're essentially the same speaker. So surely pairing them should be allowed?

    Even if some of the electronics were shared, they're manifestly not the same speaker in terms of acoustic design/signature. The frequency responses and phase characteristics would differ. A stereo image would skew. Since Sonos cares are about how well their speakers perform it's no surprise that they only allow identical designs to be paired.

    You can of course group, as two 'rooms', to get a noise from two directions.

    If you're determined to pair dissimilar models you may be able to do so with the SonoSequencr app.
    Translate
    Contributor I
    Jan 1, 2020 5:41 PM UTC

    I fully understand the discerning tastes of the audiophiles that may demand perfection in tonal balance and freq. response, however, I would like to have the option of stereo pair any Sonos One-based or three based, or 5-based products. In particular the Symfonysk line with the One series. Same wooffer, tweeter and x-over electronics inside would be close enough for my less that acoustically ideal room.

     

    This will become more and more problematic as Sonos continues to expand it product lines.   the Open API Developer network could easily solve this with a software update.

    Is the Sonosquencer app available on android?

    Translate
    Lyricist I
    Jan 5, 2020 3:58 PM UTC

    No. Needs to be a 1 to 1 pair.

    So you would need two of the same Symfonisk speakers, or two Play:1's in order to create a stereo pair.

    What about a Symfonisk bookshelf and a lamp? Do we know if they would be stereo pairable? I assume by “same” you mean the same model..?

    Translate
    Airgetlam
    Jan 5, 2020 4:03 PM UTC

    Yes, the same model. So, no, a stereo pair can not be made with a Symfonisk bookshelf and a lamp. It would need to be two Symfonisk bookshelves, or two lamps. 

    Translate
    Bruce