Skip to main content
Contributor I
Jan 4, 2017 11:49 PM UTC
Question

Sorry we can't connect to Sonos figured (2.4ghz or 5ghz)

I have been having a problem with 2x Play 5s, the support team have given up after telling me to get a new router but not much insight besides that and there must be something on your network.

Situation is that mobiles connect fine to Sonos machines but a laptop -Sony Vaio - fails to connect. Modem is Technicolor MediaAccess TG589vac. It is a 2.4Ghz and 5Ghz modem. I have finally figured out that the issue is for some reason the Play 5s are connected to 5Ghz (Support said that's notthe case) when I was advised Sonos only works on wifi (without Bridge) on 2.4Ghz.

It is quite confusing as I have to somehow either switch off the 5Ghz so Sonos goes to 2.4Ghz alone or somehow move my laptop to 5Ghz so it can control Sonos app. Any other ideas?
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

19 replies

SHARKB8T
Prodigy I
Jan 5, 2017 12:20 AM UTC
... I'm fairly confident that the Sonos products simply do not connect to a 5Ghz wifi as you are suggesting. It is my understanding that they use 5Ghz only among themselves when bonded as part of a 5.1 surround sound system, but that is, in part, because the 5Ghz network, while faster, does not provide as strong a coverage throughout a house (through walls, etc.) and a 5.1 setup is presumed to be in the same physical location and thus will be effective and enable faster communication allowing the 5.1 system to operate in sync with video....

Perhaps some of the more technical people can weigh in here and help figure out what is occurring.

Ideally you'd have a modem that allows the two wifi networks to operate such that devices connected to the 5Ghz channel can still speak with / see the 2.4Ghz connections as part of the same sub-group. (Mine does... as did my previous modem....) perhaps it is a setting on your modem to enable?

Network experts? Anyone?
Translate
Avid Contributor I
Jan 5, 2017 10:15 AM UTC
My controller would only work on 2.4 when I only had Play:1's set up over wifi.
However I now access my system using my 5.0ghz channel after connecting a Play:5 to my router via Ethernet & activating Sonosnet.
Translate
Stuart_W
World-Class Superstar
Jan 5, 2017 10:31 AM UTC
Unless your 2 x Play 5s are bonded to a Playbar as surrounds they will NOT be connecting to the 5 GHz network - That is the ONLY case of the use of 5 GHz network for Sonos (connecting speakers as surrounds to Playbar).

You can only connect the Sonos system in 2 ways:-

1) Boost mode - where at least 1 Sonos unit is wired directly to your router and that Sonos unit then produces a network (SonosNet) to which the other Sonos units connect in a mesh

2) Wireless - NO Sonos unit is wired to the router and Sonos is then connected to your Wi-Fi network - You will be talked through this through the app and, obviously, during this process you will pick the network to connect to (it will ONLY display 2.4 GHz ones) and you then supply the credentials. These will be held on the SONOS units so anybody can come and connect to your network and control Sonos

1&2) No if you never enter your Wi-Fi credentials then Sonos can never connect to the network wirelessly because it doesn't have the password. BUT, if you do go for option 2 then Sonos will use a combination of SonosNet and Wi-Fi choosing the best connection route.

So you need to check the following:-

- Ensure your laptop is connecting to the 2.4 GHz network
- Make sure you are set as a private network (https://sonos.custhelp.com/app/answers/detail/a_id/823/~/configuring-windows-firewall-to-work-with-sonos)
- Then you may need to check your Firewall settings

Is your laptop a supported OS?
Translate
Arc + Sub (Gen 1) + 2 x Play 1/ Stereo Play 3s/ Era 100 Stereo in Kitchen, One Stereo in Bedroom, Play 1 stereo pair in Study, Play 1in Bathroom, Sonos Move 2
Avid Contributor I
Jan 5, 2017 11:32 AM UTC
My controller now uses 5.0ghz to control my network with a play:5 connected.
Translate
Stuart_W
World-Class Superstar
Jan 5, 2017 11:37 AM UTC
My controller now uses 5.0ghz to control my network with a play:5 connected.

I was thinking about this when I wrote my reply as my iOS devices can, apparently, also connect to the 5 GHz network.

If Sonos is in Wi-Fi only mode then I am confident that connecting a controller to a 5 GHz network would NOT work. However, I assume that if the system is working in boost mode so a Sonos unit is WIRED to the router then a controller linked to the 5 GHz network WOULD work.

Perhaps one of the network experts could/would confirm?
Translate
Arc + Sub (Gen 1) + 2 x Play 1/ Stereo Play 3s/ Era 100 Stereo in Kitchen, One Stereo in Bedroom, Play 1 stereo pair in Study, Play 1in Bathroom, Sonos Move 2
Avid Contributor I
Jan 5, 2017 11:59 AM UTC
Yes I am using iOS
Translate
Avid Contributor I
Jan 5, 2017 12:00 PM UTC
I could not use 5.0ghz when my system was wireless.
Translate
SHARKB8T
Prodigy I
Jan 5, 2017 1:34 PM UTC
.... Ah . I am, and have essentially always been, using a boost... so my routers have been connecting 2.4 and 5 to the wired boost.... not across the two networks... :8
Translate
ratty
Jan 5, 2017 2:54 PM UTC
If Sonos is in Wi-Fi only mode then I am confident that connecting a controller to a 5 GHz network would NOT work.
It all depends on the router. Some forward multicast between wireless segments. Some don't.
Translate
Stuart_W
World-Class Superstar
Jan 5, 2017 3:44 PM UTC
If Sonos is in Wi-Fi only mode then I am confident that connecting a controller to a 5 GHz network would NOT work.
It all depends on the router. Some forward multicast between wireless segments. Some don't.


Thankyou ratty
Translate
Arc + Sub (Gen 1) + 2 x Play 1/ Stereo Play 3s/ Era 100 Stereo in Kitchen, One Stereo in Bedroom, Play 1 stereo pair in Study, Play 1in Bathroom, Sonos Move 2