Skip to main content
Contributor I
Apr 6, 2017 5:00 PM UTC
Question

Sonos system on works in compressed mode

We installed your (6) Play:3 and used a bridge (ethernet) to connect it to a cable box rca. The problem that we are having is that unless the system is set to compressed, it crackles in and out. We have tried every channel option, put the line level to the highest, made sure drivers were updated. We are using a Ubiquiti LR PRO APs for our wifi system.

Your confirmation number is: 7262290.
    This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

    13 replies

    Apr 7, 2017 1:39 PM UTC
    Another not-well-known trick is to set the line-in device setting as "airplay device", even though it isn't. This should give you a smaller delay than with compressed, but maybe enough buffer to allow Sonos to stream uninterrupted. Delay still may be more than you would like.
    Translate
    Manny S
    Sonos Employee
    Apr 13, 2017 9:06 PM UTC
    Hi gearspinners. it looks like you've already received a lot of good information from John B and Airgetlam, and we've taken a look at your diagnostic. The report is showing lots of wireless noise around the Cable Box connect, which affects the data being broadcast. The audio stream from the TV is a higher data rate than standard music services, so the stream is more apt to be affected by this interference. I would start by looking for anything electronic/electrical around the CONNECT and see if you can move that source away from Sonos. Also let's also get rid of the wireless information that's stored inside your Sonos players. To do so, open the Sonos app and go t
    o: Settings > Advanced Settings > Wireless Setup > Next > Reset.

    Please let us know if the performance changes.
    Translate
    Contributor I
    Apr 24, 2017 5:45 AM UTC
    Hi Manny,

    The connects are sitting on a shelf in a server room. However, there is no other wifi signals in that room. We have the boxes connected to the network via cat6.

    What wifi signals is it showing, im curious.
    Translate