Skip to main content
Contributor I
May 24, 2016 1:41 PM UTC

Play 5 Stereo Pair Line In Questions

1) Does a stereo pair allow for 2 selectable line in sources? Ex. Left = a turntable preamp and Right = Airport Express.

2) If setup as a rear surrounds, do you need to remove them from the Playbar and setup again to use the line in feature? Ideally, I'd like to use these as rear surrounds with a Playbar for 75% of the time and then as a stereo pair with a turntable for the remainder. But I believe that when paired as surrounds this removes the line in option(s) even when set to "full".
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

24 replies

Ken_Griffiths
May 24, 2016 2:21 PM UTC
The answer to your first question is definitely 'Yes' you can have two line-ins, even if they are set as a stereo pair... See screenshot. (Right & Left Lounge Play-5 speakers set as a stereo pair).

I don't have a Sonos PlayBar, so I cannot help with the second question (sorry).
Translate
Ryan S
Retired Sonos Staff
May 24, 2016 5:03 PM UTC
The line-in on the PLAY:5 is disabled when it's paired as a surround speaker with the PLAYBAR, same as the CONNECT:AMP when you're using it as rear speakers. You can remove the pair from being bonded with the PLAYBAR and the line-in will be available again, and then you could re-bond it. This isn't a great experience as the setup process with the PLAYBAR does take a minute or two.

We've gotten the request to have the line-in enabled when used as a surround speaker, but it's currently off for technical reasons. I'll add your voice to the request for you, but we don't have any plans currently to change this behavior.
Translate
Mark good posts by pressing the like button, and select the best answer on questions you've asked to help others find solutions.
May 24, 2016 6:14 PM UTC
Arguably, Play:5s are a bit OTT for rear surrounds. I am very pleased with the performance of my Play:1s in this role - they seem more than adequate. If / when funds allow, why not simplify your life and get a pair of Play:1s to act as surround speakers, and keep the P:5s dedicated to music and the line in?
Translate
May 25, 2016 3:53 AM UTC
If / when funds allow, why not simplify your life and get a pair of Play:1s to act as surround speakers, and keep the P:5s dedicated to music and the line in?
Another option for a little more outlay than a new 1 pair is to add a Sub for movies, moving the 5 pair to the front, dedicated to music. Depending on the kind of movies you see, this may do more for movie watching than adding a 1 pair for surround sound.
Translate
Trending Lyricist I
May 26, 2016 12:03 AM UTC
Ryan S
I have mentioned before but had no response. It has been said that there is technical issues with enabling line inputs on play 5s when in surround 5.1 mode. But the only way as you say is to unbound rear play 5s. My question is can Sonos make a toggle 5.1 mode as present and toggle to stereo pair and playbar and sub enabling line inputs . This to me is a compromise . Unbonding and rebonding is not an ideal or even a logical solution to gain access to a port.

Does any body else see this as a solution if Sonos can implement ??
Translate
Trending Lyricist I
May 26, 2016 12:07 AM UTC
Toggle or group
Lounge playbar and sub one group
and
another group play 5 stereo pair
but when both grouped ==== 5.1 surround is enabled ( with all the surround settings to get this working )
Translate
jmwils1Author
Contributor I
May 26, 2016 12:22 PM UTC
I already have a pair of Play 1s as well as Play 5s (gen 1), a sub, connect, multiple connect amps. The issue is that I want to be able to use this room for both turntable playback and 5.1. There isn't line in on the Play 1s so I was thinking of getting another pair of Play 5s (2nd gen) for this reason. The other option would be to use a connect amp. Currently this is what I'm using, but it is connected to ceiling speakers and I am moving to a house that won't have built in speakers, so would need a pair of bookshelf speakers. Of the speakers I am considering, they are in the price range of a pair of Play 5s. Plus this would involve some work running speaker wire. Anyway, thanks for the responses. And yes, a toggle for 5.1/stereo pair and or the option to use line in would be appreciated.
Translate
Contributor I
Jun 6, 2016 11:30 AM UTC
The line-in on the PLAY:5 is disabled when it's paired as a surround speaker with the PLAYBAR, same as the CONNECT:AMP when you're using it as rear speakers. You can remove the pair from being bonded with the PLAYBAR and the line-in will be available again, and then you could re-bond it. This isn't a great experience as the setup process with the PLAYBAR does take a minute or two.

We've gotten the request to have the line-in enabled when used as a surround speaker, but it's currently off for technical reasons. I'll add your voice to the request for you, but we don't have any plans currently to change this behavior.


Please add my voice too. This is very disappointing to not have as functionality because I don't want to have to purchase a CONNECT just to use my turntable with my sonos system which is also associated with my TV.
Translate
Lyricist I
Dec 3, 2016 10:59 PM UTC
Hi, add my voice too as it is very restricting now having my new play 5 gen 2 now not being able to use the echo dot with voice commands... not partical to disconnect a play 5 just for line in. Hear there is a update for the dot with sonos soon, so hopefully that addresses the issue but it doesn't someone needs to be look making the decisions on the surround sound set up because the ball is being dropped.
Translate
Dec 17, 2016 4:22 PM UTC
Add my voice!

This is a real bummer of a limitation. I did not realize it existed when I bought my two play 5's to connect to a turntable and amazon dot while providing rear surround to my playbar...

I will be returning the two play5's...
Translate