Skip to main content
Contributor I
Dec 29, 2017 3:43 AM UTC
Answered

Pairing PLAY:5's

I bought a Play:5 several years ago and wanted to create a stereo pair, so I just bought a 2nd Play:5, not knowing my first 5 was a gen 1 and the newest 5 was gen 2 and apparently you cannot pair them. Is there any way around this? Very disappointed. May end up returning the newest PLAY:5 if there is no solution.
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Chris
ChrisAnswer
Lead Maestro
Dec 29, 2017 4:24 AM UTC
There is an iOS app called sonosequencer that supposedly will pair them. I don’t know how good a pair they make but it will supposedly do it.
Respect the Queue (2)Move (3)Beam (1) Era100 (2)ARC (1)SonosOne (1)Playbar (4)Play5 (4)Play1 (3)Play3 (1)Port (2)Connect (1) Roam (2) Ace (1)Connect:Amp (4)Sonos Amp (1)Sub + (9) Echo + Smartthings; (2)Play)

11 replies

Dec 29, 2017 4:15 AM UTC
No way around; unfortunate naming choice by Sonos for the latter model. What you can do though is play them as one group of two speakers in perfect sync, if that serves. But one playing left and other playing right isn't possible.
Translate
Chris
ChrisAnswer
Lead Maestro
Dec 29, 2017 4:24 AM UTC
There is an iOS app called sonosequencer that supposedly will pair them. I don’t know how good a pair they make but it will supposedly do it.
Translate
Respect the Queue (2)Move (3)Beam (1) Era100 (2)ARC (1)SonosOne (1)Playbar (4)Play5 (4)Play1 (3)Play3 (1)Port (2)Connect (1) Roam (2) Ace (1)Connect:Amp (4)Sonos Amp (1)Sub + (9) Echo + Smartthings; (2)Play)
pjhunterAuthor
Contributor I
Dec 29, 2017 5:08 AM UTC
I downloaded SonoSequencer ($1.99) and it did the trick! Perfect solution for my needs. Thank you, Chris, for the recommendation.
Translate
Airgetlam
Dec 29, 2017 5:16 AM UTC
Interesting. I knew it could pair a Sonos One and a PLAY:1, but wasn't aware it could do the same with the PLAY:5 gen 1 and gen 2.
Translate
Bruce
pwt
Virtuoso
Dec 29, 2017 10:04 AM UTC
Interesting. I knew it could pair a Sonos One and a PLAY:1, but wasn't aware it could do the same with the PLAY:5 gen 1 and gen 2.
From a previous thread on this subject, I deduced that the check for stereo compatibility is done in the controllers, not by the speakers. SonoSequencr does not implement the check, so I guess you could stereo pair any two speakers.

The gen 1 and gen 2 Play:5 speakers sound quite different, so I do question the value of stereo pairing them — but each to their own tastes, I guess.
Translate
4 x P:5 | Sub | 4 x P:1 | 3 x Connect | 2 x Boost | Connect:Amp | 2 x One | Amp | Move | Port | Era 300
Dec 29, 2017 10:55 AM UTC
New learning for me as well; presumably this is only for iOS users? But once paired, the iOS device isn't needed till they are to be separated again, I suppose, because pairing survives power cycling?

This should address those that need the 1/One pairing as well...plenty of those at this time.
Translate
Airgetlam
Dec 29, 2017 8:08 PM UTC
Perhaps I'm too much of a purist. I bought a used PLAY:5 gen 1 to pair with my older version, rather than spending the what, $4 on sonosequencr? Could have had a nifty looking PLAY:5 gen 2!

🙂
Translate
Bruce
Chris
Lead Maestro
Dec 29, 2017 8:10 PM UTC
Well you did save you the cost also in getting a gen 2!

But I have to say the gen 2 is pretty darn good. Gen 1 isn't to shabby either though! I wouldn't want to pair my two of them though.
Translate
Respect the Queue (2)Move (3)Beam (1) Era100 (2)ARC (1)SonosOne (1)Playbar (4)Play5 (4)Play1 (3)Play3 (1)Port (2)Connect (1) Roam (2) Ace (1)Connect:Amp (4)Sonos Amp (1)Sub + (9) Echo + Smartthings; (2)Play)
pjhunterAuthor
Contributor I
Dec 29, 2017 11:48 PM UTC
I feel like I should clarify my motives about pairing a gen 1 and gen 2. I totally agree that the gen 2 is a better speaker, but I bought it solely to pair with my existing PLAY:5 (which turned out to be gen 1) for a special event (my son's wedding in the loft of our barn). The space is big enough that when I tried pairing two of my PLAY:3's, it sounded inadequate.

Call me an ignorant consumer, but I didn't know anything about gen 2's and just assumed that buying another PLAY:5 was all I needed to create a PLAY:5 stereo pair. I always figured I'd could use another PLAY:5 somewhere in the house, but I bought it specifically for this event and a short-term pairing. Imagine my surprise when it wouldn't pair. I agree with an earlier comment that SONOS should have named the gen 2 PLAY:6 or something other than PLAY:5.

The pairing the gen 1 with the gen 2 via SonoSequence, while perhaps not delivering the quality of sound that two gen 2 speakers would deliver, is MUCH better than simply grouping them together. The SonoSequence solution is perfect for my single event in an unlikely venue.

Thanks for all the interesting comments,
Translate
Chris
Lead Maestro
Dec 30, 2017 12:13 AM UTC
No need to explain. Whatever fits your need.
Translate
Respect the Queue (2)Move (3)Beam (1) Era100 (2)ARC (1)SonosOne (1)Playbar (4)Play5 (4)Play1 (3)Play3 (1)Port (2)Connect (1) Roam (2) Ace (1)Connect:Amp (4)Sonos Amp (1)Sub + (9) Echo + Smartthings; (2)Play)