Skip to main content
Contributor I
Dec 18, 2017 8:51 PM UTC

Old Wireless to New Wireless

I have a set of old wireless speakers in my dinette and kitchen that are 25 feet and 35 feet respectively from a 55" TV in the family room. I use these to listen to the TV so I don't blow the people in the family room out of their chairs. The existing system is failing and I'm considering replacing it with a couple of Sonos Play 1's. A friend has offered to sell me his Bridge and Connect. My thought is to wire the Connect to the audio out on the TV and push the sound to the Play 1's. Is there any reason this won't work? The second part of the scheme is to wire the Bridge to my router and push the music I have stored on my computer to the Connect and then wire it to my receiver and hardwire speakers. Will that work?
My music is stored on my computer in an iTunes library under AIFF protocol. I've read that Sonos and iTunes have some difficulty. Looking for comments as to whether I should proceed or whether my logic is all wet.
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

15 replies

AjTrek1
Dec 18, 2017 9:45 PM UTC
You’ve got several things going on here:

First and foremost you’ll need to download the Sonos App to your PC and/or compatible smart phone or Tablet:

Using the Connect has two options:
Option 1_ Ethernet direct to Connect from Router which is known as Boost mode
Option 2 _Ethernet direct to Bridge to setup up Boost mode and the Connect becomes a client
Using either method you must assign the Connect a name (i.e. TV Room etc.)

Now you’re ready run RCA from TV left/right output to Connect left/right inputs
Setup the Play 1’s as room and bond them as a stereo pair. Next group the Connect and Play 1’s together and you’ll hear your TV sound. However, you may experience a slight audio lag.

If you went with Option 2 above (my recommendation) you are already set to push music from your PC to the play 1's. Just be sure to turn off your TV.

If the Connect is in close proximity to your stereo all you need do is run RCA from the Connect output’s to Aux input on your stereo to hear music on the Play 1’s and your wired Stereo speakers. This assumes the Connect and Play 1's are still grouped.

I have all my music stored in iTunes on my PC, smartphone and tablets. Have had no issues with Sonos

For more in depth assistance here’s a link on how to setup Sonos: https://www.sonos.com/en-us/support/setting-up-sonos

FYI, Using a Bridge was previously called Bridge Mood. The Bridge has been discontinued in favor of a similar device with more signal reach called a Boost. Long story short the end result is the same.
Translate
Together Everyone Achieves More = T.E.A.M.
Audio77Author
Contributor I
Dec 18, 2017 10:13 PM UTC
Thanks for the input. Option 2 is the direction I will have to go. The router is in another room and the bridge would be right next to it but the signal from the bridge will have to travel through a wall and about 35 feet to the connect box. Do you think the bridge will have sufficient power and range to adequately talk to the connect box? The connect will be next to TV and on top of stereo system. No problem connecting either one to the Connect box. The Play1's will have to remain wireless and independent of any direct connections because of location.
Translate
AjTrek1
Dec 18, 2017 10:24 PM UTC
Thanks for the input. Option 2 is the direction I will have to go. The router is in another room and the bridge would be right next to it but the signal from the bridge will have to travel through a wall and about 35 feet to the connect box. Do you think the bridge will have sufficient power and range to adequately talk to the connect box? The connect will be next to TV and on top of stereo system. No problem connecting either one to the Connect box. The Play1's will have to remain wireless and independent of any direct connections because of location.

If you have a good Wi-Fi signal in the room you're speaking of the Bridge should have no problem reaching it (under ideal conditions). Typically a Bridge is used to overcome Wi-Fi limitations. However, every environment is different so you can only test and see what happens. As I mentioned the newer Boost generates an even stronger signal if the Bridge proves to be inadequate. Good Luck
Translate
Together Everyone Achieves More = T.E.A.M.
AjTrek1
Dec 18, 2017 10:40 PM UTC
@ Audio77_your quote
The Play1's will have to remain wireless and independent of any direct connections because of location.

It was always assumed the Play 1's would not be connected via Ethernet. Are you unsure as to what is meant by Grouping and/or Bonding?
Translate
Together Everyone Achieves More = T.E.A.M.
Audio77Author
Contributor I
Dec 19, 2017 2:36 AM UTC
I would have to say no I am not perfectly clear on what grouping and bonding is. My exposure to Sonos is what I have seen and heard at Best Buy and what I have read on this Web Site. That's the reason for the questions. I don't want to buy something I think will work. I want to be absolutely certain it will work. From what you have said It sounds like it will.
Translate
AjTrek1
Dec 19, 2017 4:48 AM UTC
I would have to say no I am not perfectly clear on what grouping and bonding is. My exposure to Sonos is what I have seen and heard at Best Buy and what I have read on this Web Site. That's the reason for the questions. I don't want to buy something I think will work. I want to be absolutely certain it will work. From what you have said It sounds like it will.

Not to worry...the link I gave you earlier has a wealth of information on how to set up your Sonos. That said (speaking metaphorically) everyone has to walk before they can run and setting up Sonos is no different. The Sonos app will basically walk you through setting up your your Bridge, Play 1's and Connect!

Just a little Sonos 101...

When setting up any Sonos speaker for the first time; or adding a speaker to an existing setup, the Sonos app will always prompt you to name or rather select a room to assign it to. So in your case after setting up your Bridge you'll setup your first Play 1 and assign it to a room (name it) such as Den, Kitchen, Living Room etc. Next you'll setup your second Play 1 in the same manner. The Sonos App is smart enough to ask if you' would like to assign the second Play 1 to the same room and make them a Stereo Pair which is a form of Bonding. You'll say yes!

Now that the Play 1's are setup you'll next bring in the Connect and assign it to a room (name it). So for example...the Connect is called TV Room and the Play 1's (although they are in the same room as the Connect) may possibly be called Living Room.

The Sonos app will show you all your Rooms with and option to bring them together as a Group. Grouping does not require you to setup a new name. Grouping isn't permanent (unless you want it to be) which means you can bring two rooms (i.e. Sonos components) together as a Group for a period of time and later un-Group them. Grouping is what you will do with the Connect and Play 1's.

Putting all this in writing sounds a bit daunting but it really isn't 🆒. Just follow the Sonos app which makes it pretty easy.

Good Luck and enjoy your Sonos!
Translate
Together Everyone Achieves More = T.E.A.M.
Audio77Author
Contributor I
Dec 19, 2017 5:13 AM UTC
Thanks very much, you are a wealth of information.
Translate
AjTrek1
Dec 19, 2017 11:28 AM UTC
Thanks very much, you are a wealth of information.

You’re welcome! Just sharing the little that I know. There others in the Community who can guide you as well such as Jgatie, Chris, Mike V and Kunar just to name a few. Great to have another Sonos user. Once again...Enjoy your Sonos
Translate
Together Everyone Achieves More = T.E.A.M.
AjTrek1
Dec 19, 2017 12:50 PM UTC
One last comment. Using the Setup you’re contemplating the audio volume will be controlled using the Sonos app not your TV remote unless you can set it to a Variable Output for external speakers via the RCA’s.
Translate
Together Everyone Achieves More = T.E.A.M.
Audio77Author
Contributor I
Jan 5, 2018 12:42 AM UTC
I bought my Play 1's and did the 1st phase installation for the TV. Everything connected perfectly, but you mentioned an audio lag and that is exactly what is happening. My old 900 MHz system and my current sound bar took and take their signal from the 3.5 mm audio out with a splitter. They were both synchronized perfectly with the TV sound. The Connect feeding the Play 1 is using the same source but has a delay. Is there a fix for this? I'd hate to have to return the system.
Translate