Skip to main content
Contributor I
Aug 28, 2022 12:18 PM UTC

Move Stereo Pair - Apple TV

I can get one Move connected to my Apple TV (latest version) with Airplay. 
 

When I stereo pair both Moves, it no longer appears as a list of available devices on the Apple TV. 

 

Any ideas what I am doing wrong?

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

18 replies

Contributor I
Aug 28, 2022 8:29 PM UTC

What is the best way to achieve my goal of having the Moves as TV speakers?

 

ideally, I’d rather not use the ATV, that was a last resort. I’d really like to just have the stereo paired Moves play from the TV and avoid any further major hardware  

 

 

Translate
Ken_Griffiths
Aug 28, 2022 8:57 PM UTC

What is the best way to achieve my goal of having the Moves as TV speakers?

 

ideally, I’d rather not use the ATV, that was a last resort. I’d really like to just have the stereo paired Moves play from the TV and avoid any further major hardware  

The Move isn’t designed for use with TV audio as it’s really just a portable ‘music’ speaker to mainly use around the Home and outdoors (garden area etc.)

You ideally need to purchase a Sonos Home Theatre product:

  • Arc
  • Beam
  • Amp (requires two 3rd-party passive speakers)
  • Ray

… to which you then add (bond) 2 x non-portable Sonos speakers as an example…

  • One
  • One SL
  • Five

Or you can bond another Amp instead..

  • Amp (requires two 3rd-party passive speakers)

The Home Theatre setup from the above can also be used with one or two Sonos Subs.

So there’s currently no option to use two Moves, nor two Roams for that matter, which are the Sonos portable rechargeable products.

 

Translate
Ken_Griffiths
Aug 28, 2022 9:02 PM UTC

You can of course connect a single Bluetooth Move speaker to a TV, or Amazon FireTV etc; or any similar device that has a Bluetooth transmitter, or use Airplay (over WiFi) to connect to a standalone, or stereo pair of Moves etc; for use with Apple TV.

See this link: https://youtu.be/PsvjrixtVJU

Translate
Contributor I
Aug 29, 2022 5:40 PM UTC

Ok, how about a beam and two SLs. Would I be able to unplug one SL, plug it in in my waterproof bar?

 

so I can use both with the beam, and one standalone?

Translate
Ken_Griffiths
Aug 29, 2022 7:23 PM UTC

Ok, how about a beam and two SLs. Would I be able to unplug one SL, plug it in in my waterproof bar?

 

so I can use both with the beam, and one standalone?

The issue with that option, is you will then have to unbond the surrounds from the Beam every time you want to use the ‘One’ standalone - to bond/unbond the surround speakers actually doesn’t take long, but if you intend to use Trueplay to tune the setup to the room, the Trueplay settings will be lost when you unbond them. So you then have to tune the setup to the room all over again when adding the speaker back and that can take quite a while to do.

Really I would suggest you leave the speakers bonded and use another standalone speaker like a Move, for example, instead.

Translate
Contributor I
Sep 2, 2022 5:24 PM UTC

Thought I would pop in an update. 
 

Beam + 2xOne SL - Living Room (Static)

Move - Charging in kitchen, for use wherever :wall hangers around and about)

 

Nice setup, thanks to your help :)

 

one more question. Each time I disconnect a 1+ for moving/putting up/fitting brackets etc, is an absolute nightmare to get them all back up together. Should I remove them from the beam each time I power them down?

 

it’s a bit frustrating but shouldn’t be an issue when the room is settled :)

Translate
Senior Virtuoso
Sep 2, 2022 5:38 PM UTC

Once you’ve got everything set up they just stay powered on. You don’t need to unplug anything. After a few minutes of non-use they’ll go into low power standby mode. 

Translate
Contributor I
Sep 2, 2022 6:10 PM UTC

Thanks very much for all your help :)

Translate