Skip to main content
Contributor I
Jan 6, 2017 4:12 PM UTC
Question

Line In poor quality play 5 2nd Gen

Just bought a play 5 because it has the line in input but when I connect it it my TV the quality is very bad, particularly for speech, sounds like bubbles. I tried the settings as per the support page but no improvements, any ideas
    This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

    19 replies

    Jan 6, 2017 4:55 PM UTC
    Hi. Where are you taking the output from on the TV please? Headphone socket? Optical + DAC?

    Bear in mind that Sonos only makes one product that's really intended for TV sound - the Playbar. Even so it should not be really bad.

    Is the Play:5 OK with non-line-in sources? Or another line-in source like your phone (as a test)?
    Translate
    PlopsAuthor
    Contributor I
    Jan 6, 2017 5:09 PM UTC
    Hi, thanks for your reply. I am taking the output from the headphone socket as this worked wel with an older cheaper speaker but I am trying to build a Sonos network at home slowly. It not great with other sources I.e phone or iPad either but a little better than with the TV. It sounds great over the network/WiFi.
    Translate
    Prodigy II
    Jan 6, 2017 5:31 PM UTC
    Try switching the Play 5 input to compressed
    Translate
    PlopsAuthor
    Contributor I
    Jan 6, 2017 5:46 PM UTC
    No improvement with compressed
    Translate
    Jan 6, 2017 7:16 PM UTC
    Do you have another cable to try. If all line in sources are poor quality sound then a faulty cable or line in socket on the P:5 might be the problem. The sound really shouldn't be poor.
    Translate
    PlopsAuthor
    Contributor I
    Jan 6, 2017 7:30 PM UTC
    Try two things, different cable which is slightly thicker so should be better quality and no different. Also connected a creative lab speaker (D200) to same TV output and sound is perfect. Does this mean the Play 5 line in is not a true Aux input?
    Translate
    Jan 6, 2017 8:04 PM UTC
    No but it may indicate a hardware fault on the Play:5 unit you have.
    Translate
    Jan 6, 2017 8:12 PM UTC
    I don't usually use line in but just put my phone through a Play5 gen 2 and sounded great.
    Translate
    PlopsAuthor
    Contributor I
    Jan 6, 2017 8:20 PM UTC
    Ok thanks, I have a call in with Sonos support so may need to wait and see what they come back with. The shop said they would take it back if the problem couldn't be resolved.
    Translate
    PlopsAuthor
    Contributor I
    Jan 9, 2017 5:43 PM UTC
    Hi, this is the response I got from SONOS which I wasn't expecting "Use the RCA connection on the PLAY:5 Gen 2 let you transmit the audio of your TV on your Sonos system; however, when this happens there's an audio conversion from analogic to digital that causes high lags and audio interruptions (because the conversion requires a certain time). That's why this kind of configuration is not recommended."
    Translate